Quality Lifts’ 10,000-lb. Capacity 2-Post Lift features a 78-1/2" lifting height. It also features double telescoping lift pads, an asymmetric/symmetric design, adjustable height, automatic arm restraints, single point lock release, overhead shut off and a high gloss powder coat. Quality Lift recommends Q2P10 install for max warranty.
10,000-lb. Capacity 2-Post Lift
• ALI/ETL certified
• Lifting capacity: 10,000 lb.
• Max load per arm: 2,500 lb.
• Rise Height: 78.75"
• Height overall: 12' 3 1/2" or 11' 5 1/2"
• Width overall: 131 3/4"
• Drive thru clearance: 98 3/8"
• Floor to overhead: 11' 8 1/2" or 10' 10 1/2"
• Front arm reach: 21 3/4" - 39 1/4"
• Rear arm reach: 38 1/4" - 55 3/8"
• Screw pad height: 4" - 7 1/2"
• Inside columns: 110 1/4"
• Motor: 2HP
• Voltage single phase: 208-230v
• Ceiling height required: 12' 5"
• Concrete shall have a compression of 3500 PSI and a minimum thickness of 4"
• 12' minimum clearance to obstruction in front and back of center of post
• 6' minimum clearance to obstruction from centerline of structure
For additional information, visit
www.qualitylifts.com.
Call (877) 771-5348 for quote or local distribution.