Use Lisle’s 69200 Test Lead Kit with 56810 or 60610 to easily and securely connect a relay test jumper to a multimeter.
Technicians can also use a banana plug-to-pin probe adapter for use with pin probes.
The kit contains two terminal-to-banana tip wires, two pin tip-to-banana plug adapters and one terminal-to-banana tip wire with jumper wire.
The jumper wire may be used between common and open to close the relay circuit for testing, and has a test port to easily check voltage.
Also provides access for a clamp-on amp meter.
For additional information, visit http://www.lislecorp.com.
Lisle Corporation
http://www.lislecorp.com