Superlift's 2" and 4" JK kits now cover 2012 models. Because the new engine configuration causes the stock front driveshaft to bind at full droop on lifted JKs, Superlift includes a front limiting strap. The single limiting strap's positioning is toward the axle's center, so very little articulation is lost. Install an aftermarket CV-style driveshaft then remove the strap to restore full travel. Also new is a third shock option: The Fox 2.0 Performance Series IFP (shown) joins the existing base Superide twin-tubes and premium SS monotubes by Bilstein. Superlift's 4" kit uses application-specific pre-set coil springs to clear up to 35x12.50 tires with no other modifications. An adjustable front track bar is included. A weld-on relocation bracket is standard for the rear track bar; a bolt-on bracket is also available. Use Superlift's 2" coil spacer lift kit to economically fit 33x12.50 tires. Many options and upgrades are available.

For more information, contact Superlift Suspension Systems at (800) 551-4955 or visit www.superlift.com.