Induction Innovations Five-Step Windshield Removal with Induction Heat

Induction Innovations Offers Five-Step Windshield Removal with Induction Heat

The Glass Blaster releases urethane in hard-to-reach areas such as curves and deep pockets, where other glass tools can’t go. Back glass and windshields can be removed in as little as 10 to 15 minutes, and quarter glass in as little as three minutes.

Induction Innovations windshield removal

Induction Innovations’ Inductor Glass Blaster can make the tough job of removing an automotive windshield a lot easier — and more profitable.

The Glass Blaster is a unique time-saving approach for removing automotive glass without the need for wires, knives or other traditional tools. Imagine removing automotive glass without cutting the encapsulant, scratching the frit and with little to no need to pull the interior.

Guide pins are kept intact for ease of re-installation since they weren’t cut. A non-metallic tape wrapping protects the glass as the Glass Blaster quickly and cleanly heats and unseals the bond, allowing the glass to be removed from the outside, without touching the interior trim, and without the muscle power usually required. From locating the urethane bead to lifting the glass out, the entire process takes less than 15 minutes.

The Glass Blaster releases urethane in hard-to-reach areas such as curves and deep pockets, where other glass tools can’t go. Back glass and windshields can be removed in as little as 10 to 15 minutes, and quarter glass in as little as three minutes. The Glass Blaster:

  • Eliminates downtime waiting for subcontractors
  • Reduces/eliminates need for consumables
  • Salvage glass normally discarded in the repair process
  • Reduces overall labor time
  • Can also remove bonded panels to metal and sprayed-on bedliners

The Glass Blaster can be bought as an independent kit or included as an accessory with either the Inductor Series Pro-Max and Max models. You can purchase the product through your local tool distributor.

For a list of resellers, visit theinductor.com.

 

Induction Innovations Inc.
Phone: 877-688-9633Fax: 847-551-3369

You May Also Like

Elevate Your Automotive Work with Mueller-Kueps’ Versatile Creeper 

This creeper boasts a slightly elevated, upholstered headrest for added comfort during vehicle maintenance.

Mueller-Kueps introduces its professional creeper in a vibrant neon green (No. 510 098) for enhanced visibility.

Crafted for daily use in workshops and mobile service trucks, this creeper boasts a slightly elevated, upholstered headrest for added comfort during vehicle maintenance. The built-in parts tray ensures convenient access to tools. With six smooth-rolling swivel casters, it effortlessly glides on various surfaces. 

Hunter Engineering Expands Wheelbase For Popular Scissor Lifts

Extra length responds to growing industry needs.

Philips Xperion Work Lights Designed to Save Service Pros Time

The two-part magnetic handles make it easy to aim the light exactly where it’s needed.

Hunter Engineering Expands Wheelbase for Scissor Lifts

Extra length responds to growing industry needs.

Cementex Debuts New Arc Rated Face Shields

Updated face shield provide classic, reliable arc flash protection.

Other Posts

TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool
Upgrade Your Air System: It’s Easier Than You Think

Improving your shop airflow is only a benefit, unless you like to spend more time, work harder and make less money.

air flow tubes
Hunter Engineering Introduces Hawkeye XL Alignment System

New aligner offers speed, versatility and ease of use, the company says.