Dodge Caliber, Jeep Compass and Patriot Rear Camber Arm
Part No. 67450
The new fully adjustable camber arm for the Dodge Caliber, and the Jeep Compass and Patriot replaces the nonadjustable stock arm. Camber is now adjustable for a range of +/- 2 degrees with our unique, easy-to-adjust patent-pending cam adjuster. Use our Bushing Press Adapter #67451 with our Ball Joint Press #72509 to remove and replace stock bushings.
Rear Adjustment Range: Camber ±2.5°
Ins. time: .7 hr/side
Required: 1 per wheel
Dodge AWD and FWD:
2007 & Up Caliber
Jeep AWD and FWD:
2007 & Up Compass
2007 & Up Patriot
Bushing Press Adaptor for 67450 Arm
Part No. 67451
The new fully adjustable rear control arm (67450) for Dodge Caliber and Jeep Compass/Patriot utilizes the bushing from the stock, non-adjustable arm. The 67451 press tool adapter is designed specifically to remove and install both control arm bushings. It can be used with the 72509 Ball Joint Press, 40920 Performance Ball Joint Press, 40910 Bushing Service Set or equivalent.
For additional iformation, visit www.specprod.com.