What tool does this picture above represent?

The winner will be randomly selected from correct entries and awarded $50. Entries must be received by the end of the month. Only one winner will be selected. Chances of winning are dependent upon the number of correct entries received. Employees of Babcox Media, industry manufacturers and TechShop advertisers are not eligible to enter.

Guess the tool

Guess the Tool Contest #63

What tool does this picture above represent?

Guess the tool

Guess the Tool Contest #62

Guess the tool

Guess the Tool Contest #61

TechShop Podcast: Torx Bits

Ever wonder why there are different kinds of Torx bits, and if there's a reason for it? TechShop's Eric Garbe explains in this latest podcast.

Code Reader Podcast: P2422

DTC P2422, an unusual cause and help from a Honda technical service bulletin.

Code Reader Podcast: P00C6 & P228C

Were loose PCM connections the cause of trouble codes P00C6 and P228C?

Code Reader Podcast: P0420 & P0430

This TSB was released by General Motors, covering most of their large SUV’s and vans that have been produced from 2002 and up. The related DTCs that a technician may find are P0420 and P0430, Catalyst Efficiency Below Threshold.

Code Reader Podcast: P0300

A Technical Service Bulletin identifies an unusual cause for a common code.

Code Reader Podcast: P0172 System Too Rich, Again

A simple solution for a common trouble code.

Follow TechShop’s podcast on these platforms!

TechShop Podcast: Punches & Chisels

An auto technician is going to use a wide variety of punches and chisels, as is any mechanic in most fields, but there are a lot of overlooked details that are good to know.

Follow TechShop’s podcast on these platforms!

TechShop Podcast: Torx Bits

Ever wonder why there are different kinds of Torx bits, and if there's a reason for it? TechShop's Eric Garbe explains in this latest podcast.

Code Reader Podcast: P2422

DTC P2422, an unusual cause and help from a Honda technical service bulletin.

Connect with us

Close Sidebar Panel Open Sidebar Panel

Video

ADAS & Alignment [Video]

TechShop Staff Writers

April 1, 2021

How to handle a vehicle that comes into the shop that has ADAS, particularly when it comes to an alignment.

Hunter trainer Dave Fox and Andrew Markel of Babcox Media discuss how to handle a vehicle that comes into the shop that has advanced driver-assistance systems (ADAS), particularly when it comes to an alignment.

Click Here to Read More

For more info: hunter.com

In this article:ADAS, Hunter Engineering, Wheel Alignment, Wheel Service Equipment

Click to comment

Video: Video: Resetting the Steering Angle Sensor After an Alignment

Video: YouTuber Chris Fix Diagnoses Brake Noise Complaint

Video: Hunter Dynamic Wheel Balancing

Video: TechShop’s Tool Minute: Cylinder Misfire Codes

Connect

By Category

By Category

Popular Posts

Popular Posts

Featured Video

Video: Resetting the Steering Angle Sensor After an Alignment

Correcting Ride Height Based on Gas Tank Level [Video]