Alignment and Scan Tools

Alignment and Scan Tools


How can centering a steering wheel during an alignment cause a vehicle to turn a blind eye?

In the past two years we have seen more vehicles on the market with stability management and adaptive cruise control. If a vehicle with one of these systems comes into your shop for alignment, be aware that any changes in the steering position sensor’s “zero” position may have drastic consequences for the safety of the vehicle. These systems use multiple inputs from different sensors to set the distance from the cars in front. If the data from one of these sensors is false, it could cause the system to go blind.

RADAR CRUISE CONTROL
Adaptive cruise control builds on the functionalities of the cruise control system and, within certain system limits, maintains the correct distance from the vehicle in front – automatically. The system uses a special radar sensor to measure the distance from the vehicle ahead. If the distance is too small, the system reduces speed moderately by easing the throttle or it automatically activates the brakes, up to approximately 25 percent of maximum vehicle deceleration. Once the road ahead is clear again, adaptive cruise control accelerates the car back up to the speed previously set.

If the braking process activated by the adaptive cruise control does not decelerate the vehicle sufficiently, an acoustic signal is triggered immediately to warn the driver to intervene manually. An outstanding feature of adaptive cruise control is its driving dynamics. The program maintains a short distance from the vehicle in front and accelerates swiftly back up to the journey speed set if the road ahead becomes clear.

Even if adaptive cruise control is activated, the driver is still responsible for monitoring his vehicle’s speed and the distance from the vehicle in front. Adaptive cruise control does not react to stationary objects or approaching vehicles.

GOING IN CIRCLES
The radar systems on these vehicles are designed to look at what it thinks is in the lane ahead while monitoring the cars in the lanes next to it. Since the radar sensor does not move, to interpret the radar signals it looks at the input from the steering position sensor. If a technician centers the steering wheel during an alignment without “zeroing out” the steering position sensor with a scan tool, it could cause some problems.

If the steering position sensor is giving a false reading, the information from the radar sensor is interpreted differently. Since the car now thinks that it is turning, the computer might think that that car in front might just be a car in the next lane over. The vehicle probably will not hit the approaching vehicle, but the driver will notice abnormal operation like rapid deceleration or brake engagement.

On these systems, the radar unit may need to be aligned. If the rear suspension is adjusted and the thrust angle is altered by damage or adjustment, the radar sensor on some Audi models may need to be adjusted with specialty tools.

It is critical that the technician look for these systems on 2004 and newer vehicles that come in for alignment. Typically, these systems are only found on high-end models from Audi, BMW and Cadillac. But, these systems are being offered on many mundane models for 2006, like the Toyota Sienna Minivan. Some aftermarket scan tools can reset the steering position sensor to zero, or at least let you read the input from the sensor to determine if there is a problem.

You May Also Like

Impact Wrench Technology

Interchangeable anvils are a feature on some new impacts.

Technology is defined as the application of scientific knowledge for practical purposes, especially in industry. We often picture technology as something that has computers and electronics attached, and often it does. But, in the world of impacts, both in the realm of pneumatic and cordless, technology bears much deeper roots.

Brake Lathe Basics

Resurfacing drums and rotors is a machining process with its own specific guidelines.

Refrigerant Oil Has to Be Right

Oil type is just as important as oil capacity.

Three bottles of refrigerant oil
Top 5 Tools: Steve Coffell, Auto World, Hazelwood, MO

Steve Coffell, a technician at Auto World in Hazelwood, MO, says his Top 5 Favorite Tools are: Related Articles – Mayhew Introduces New 14-Piece Micro Hand Tool Set – New Small Stud Extractor Now Available from Mayhew Tools – Matco Debuts 5-Piece Purple Screwdriver Set   OTC Genisys Touch – Quick scan, bidirectional control Snap-on

Wheel Bearing Adjustment Tools & Equipment

A wheel bearing that’s out of adjustment can reduce bearing life and can affect more than just the bearing. It’s important to adjust the wheel bearing endplay to the proper specifications. If the bearing set is adjusted too loose or too tight, it can cause the bearing to fail prematurely. There are a few types of assemblies, so using correct procedures and tools will ensure a comeback-free wheel bearing installation.

Other Posts

Tools in the Eye of the Beholder

We’re here to help you see all the tools, so you can invest wisely.

Multimeter Accuracy: How Important Is It?

Multimeter accuracy is critical for EV diagnostics.

multimeter
More Than A Scan Tool

Scan tools serve as indispensable diagnostic hubs, offering access to a wealth of resources, from OEM technical bulletins to community-documented repairs.

scan tool
Battling Stress and Burnout

Here are some quick tips for managing stress and avoiding burnout in the fast-paced automotive repair industry.

Nadine Battah