Are You Using Your Scan Tool To Its Fullest?

Are You Using Your Scan Tool To Its Fullest?

Plug it in, scan for codes, it seems like the same thing over and over again. But are you getting the most out of your scan tool? Here are some tips and tricks.

scan tool article

By Eric Garbe, Managing Editor

Plug it in, scan for codes, it seems like the same thing over and over again, and when you’ve got one eye on the clock, it’s easy to rush through a few steps to get from point “A” to point “B.” But are you getting the most out of your scan tool?

We’ve all been there. You’re short on time, and the next thing you know the scan tool wants information you don’t have. It’s asking for an engine code, but there are six different ones listed! They’re all 2.0 liters — can they all be that different?

Unfortunately, they can, and to make matters worse, they’re enough alike that no matter which one you choose, the scan tool will still work. The problem is that you may not get all of the data you are looking for and you may not realize it. Just like any modern computers, the software and programming on automotive control units is continuously updated and revised — even during the same model year run of a vehicle. It’s more common than not to have multiple revisions throughout the course of a year. The smallest of revisions, from additional sensors, to modified fuel and ignition maps, to tightening emission regulations, can mean the difference between a correct or missed diagnosis. Your scanner needs to know exactly what it is looking for. The same advice holds true for all control units — Engine, Transmission, ABS, Airbag, Body — the programming is very specific.

Unfortunately, many auto manufacturers don’t make it very easy for us to find this information, but taking the time to look it up and figure it out will pay off in the long run. This information is all buried somewhere, and here’s a list of some of the different sources that can hold the “key” to letting your scanner know what it needs:

  • The VIN
  • Production Date
  • Service Codes
  • Model Codes
  • Sales Type
  • Engine Codes or
  • Transmission Codes

Some are in obvious locations, but the most common places to find the more illusive ones are glove box labels and trunk labels (near the spare tire or jack), and sometimes the labels reside in the owner’s manual. It may come down to locating codes stamped into engine blocks or transmission cases, or stamped directly on a control unit.

Fortunately, with the internet, there’s almost always someone who’s already had to find these codes, and you can probably look it up and find them pretty easily. When your scanner asks for it, take the time and find the correct codes. You’ll not only realize the immediate benefits, but over time you’ll get used to what is where on what type of car and getting the most out of your scan tool will be a regular part of your day.

 

Coding: Scan Tool Tips & Tricks

Looking for some more neat scan tool tips and tricks? Have you ever tried to do any coding? Although you may not be able to currently do this on every make and model, it’s becoming more and more common.

What we are talking about is actually changing the factory binary codes — the bits and bytes — that auto manufacturers use to enable or disable different options within certain control units. There are a number of reasons you may want to do this, from installing aftermarket accessories to enabling factory options. It can help you with unusual diagnostics as well.

 

Factory Options

Auto manufacturers have always made their cars so they don’t have to do too many things twice. In the old days, for example, you might buy a car with single exhaust, but the mounting holes and brackets are still on the frame for dual exhaust, you just didn’t check that option. New cars are the same way, only in the electronic sense.

Any given control unit has the ability to do many of the functions that it doesn’t do, simply because it was not coded to do them.

For example, you may be able to change the door locks to unlock all at once instead of just one, or make all of the windows go down by holding the key in the unlock position. You may be able to change turn signal and lane change features, or even enable a hatch release button. This can all be pretty fun, and also very profitable! You may have already had customers ask about this.

 

Aftermarket Accessories

Modifications, both cosmetic and performance, are as popular as they have always been, and to run with the current crowd of enthusiasts, you’ll need to become familiar with coding.

Many aftermarket accessories rely on coding changes to work correctly, and you’ll start to see the requests for this more and more often.

 

Diagnostics

Another important factor to consider is that there are many inexpensive hand-held scanners that can perform these coding procedures. Many people are trying their hand at this coding, and in some cases throwing caution to the wind. You may very well get a car in your shop that has been coded incorrectly, then changed hands and the current owner has no idea of its history.

If you have a strange problem, don’t forget to look at the coding, it could be an easier fix than you think!

Coding is here to stay. Get familiar with it now and it’ll pay off in the long run!

 

You May Also Like

Fine-Tuning Your Wheel Balancing Process

The first step to a smooth ride and well-balanced tire has nothing to do with the balancer.

Courtesy of ShopOwner

The best tire in the world can’t fix a poor balance procedure and worn-out tooling. We have an opportunity to elevate the level of customer experience in our industry that takes nothing more than a few minutes of time and a commitment to using proper procedures and tools. And guess what? Your customer is more than willing to pay for it. Intrigued? Read on to learn what you can do in your shop to generate higher gross profit and lower comebacks.

View the TechShop Buyer’s Guide Today

With the instant power of the internet, a complete list of tool manufacturers and company information is at your fingertips.

Tool button on a keyboard
2022 TechShop Year in Review

Just in case you missed any of our great feature articles this year, we have pulled them together in one spot for you!

Clean auto shop
Shop Equipment ROI – Tooled for Profit

If you understand the basic idea and process of calculating ROI, it can help you make good purchasing decisions.

Tire and Wheel Service Equipment

Wheels and tires are changing and so is the equipment we use to service them. See how the latest equipment updates stack up.

Other Posts

Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool
Upgrade Your Air System: It’s Easier Than You Think

Improving your shop airflow is only a benefit, unless you like to spend more time, work harder and make less money.

air flow tubes
Why ECU Reflashing Needs Certain Power Levels

A reflash power supply is not designed to jumpstart the vehicle.