AutoEnginuity Releases Giotto Scan Tool Version 15.3
Connect with us
Close Sidebar Panel Open Sidebar Panel

News

AutoEnginuity Releases Giotto Scan Tool Version 15.3

Giotto 15.3 includes important in coverage for Jaguar, Land Rover and Porsche, including added DTC odometer readings for Jaguar and Land Rover, and added DTC fault frequency for Porsche, among many other additions.

Advertisement

AutoEnginuity, LLC has announced the worldwide release of the Giotto scan tool (Version 15.3) for the Windows platform.

Click Here to Read More
Advertisement

Giotto 15.3 introduces a leap forward in coverage for Jaguar, Land Rover and Porsche.

Important features include:

Jaguar

  • Added DTC Odometer readings
  • Added Headlamp Control Module B full system support
  • Added Driver Door and Passenger Door Module system test Calibrate Window Glass
  • Added Driver Seat Module system test Seat Normalization
  • Added Gateway Module (GWM) system test Register Battery
  • Added Rear Tailgate Module (RTM) system test Tailgate / Trunk Calibration
  • Added Ride Level Control Module (RLCM) system tests Inflation Showroom, Compressor Replacement, Inflation, Deflation
  • Improved XF TCM system support by adding missing adaptive sensors

 

Advertisement

Land Rover

  • Added DTC Odometer readings
  • Added ABS Control Module system tests: Lateral Sensor Calibration, Long Sensor Calibration, Roll Rate Sensor Calibration, Pressure Sensor Calibration, Steering Angle Sensor Calibration
  • Added AWD Control Module system tests: AWD Calibration, Pump Venting
  • Added Driver Door and Passenger Door Module system test Calibrate Window Glass
  • Added Driver Seat Module system test Seat Normalization
  • Added Gateway Module (GWM) system test Register Battery
  • Added Headlamp Control Module Headlamp Control Module Calibration system test
  • Added HVAC Module Actuator End Stop Detection and Reset Compressor Protection system tests
  • Added Rear Tailgate Module (RTM) system test Tailgate / Trunk Calibration
  • Added Ride Level Control Module (RLCM) system tests Inflation Showroom, Compressor Replacement, Inflation, Deflation
  • Added Running Board Module (RBM) system test Service Mode Enable / Disable
  • Added Parking Brake Control Module full system support (Including system tests: Long. Sensor Calibration, Activation, Brake Pad Replacement, and Exit Maintenance Mode)
  • Added PCM actuations
  • Added BCM system tests: Battery Replacement, Ignition Counter Reset, Rain Sensor Calibration, Reset Adaptive Values After Clear Reset, roof Blind Calibration, Steering Column Calibration, Sunroof Calibration, Transport Mode Disabled and Valet Mode
  • Added PCM Diesel system tests: Reset PCM Adaption, Service Interval Reset, Fuel Prime, Diesel Exhaust Fluid Pump Replacement, Diesel Exhaust Fluid Sensor Tank Level, Diesel Fuel Adaption ReInitialization, Oxidation Catalyst, Oxygen Sensor, Reset Exhaust Valve Adaption, Reset Low Pressure EGR Adaptions, Reset Mass Air Flow Adaption, Reset Particulate Filter, Reset SCR Quality Filter, Reset SCR Start Inhibit, Turbine Shut-Off Valve Replacement, Throttle Valve Actuation Replacement and Water In Fuel Detection

 

Advertisement

Porsche

  • Added Cayenne GTS, Cayenne Hybrid, Macan GTS and Macan Turbo model support
  • Added enhanced support for 911 2012-’16, 911 Turbo 2013-’16, Cayenne 2010-’16, Macan 2013-’16
  • Added DTC Fault Frequency and Odometer readings for UDS-based modules

 

For further details about Giotto products, visit autoenginuity.com or email [email protected].

Advertisement
Click to comment
Connect
Tech Shop Magazine