AutoPro from Raytek - A 'Must Have' Infrared Thermometer for Automotive Technicians

AutoPro from Raytek – A ‘Must Have’ Infrared Thermometer for Automotive Technicians

The Raytek AutoPro infrared thermometer is developed specifically with the needs of today's automotive, diesel and transportation technicians in mind. Rugged, fast and convenient, this professional tool offers many valuable features for automotive technicians.

The Raytek AutoPro infrared thermometer is developed specifically with the needs of today’s automotive, diesel and transportation technicians in mind. Rugged, fast and convenient, this professional tool offers many valuable features for automotive technicians:
• SmartSight – bright dual laser sighting system that merges into a single laser point when the unit is at the optimal distance from the object being measured;
• Bright illumination flashlight – white LED that conveniently illuminates the work area when the trigger is pulled;
• Removable, powerful magnet attached to the base of the unit for handy, safe storage;
• Temperatures up to 535ºC (999ºF); and
• 1% accuracy.

SPECIFICATIONS:
• Temperature range: -32 to 535°C (-25 to 999°F);
• Distance to spot size (D:S): Approximately 16:1 at focus point – optimized for use at 8 inches;
• Response time: Less than or equal to 0.5 second (95% of reading);
• Emissivity: Pre-set at 0.95;
• Accuracy: ±1% at 23ºC (73ºF);
• Laser sighting (Class II): SmartSight dual laser sighting;
• Typical distance to target (Spot): 200 mm to 600 mm (8 inches to 2 feet);
• Power: 9V alkaline or NiCd battery;
• Temperature display: ºC or ºF selectable and MAX;
• LCD backlit: Included;
• Display hold (7 seconds): Included; and
• Holster: Option available.

For additional information on Raytek’s infrared thermometers, visit www.raytek.com/auto_units.

You May Also Like

Pulling Codes: Multiple Misfire Personalities

A vehicle fails an emission test due to a series of codes, with misfire activity found on cylinders 2, 4, 6, 8 and 3 – and a strange metallic sound can be heard when the rpms are raised. See how Carlton Banks solves this latest Pulling Codes case.

A Story of Codes P0302, 04, 06, 08 & 03
 

This month’s diagnostic journey begins with a 2008 Land Rover Discovery that is taken in to a local testing facility for an emission test and fails due to a series of misfire codes.

Misfire activity is found on cylinders 2, 4, 6, 8 and 3; at first glance this series of codes implies that there may be bank 2 issues, but the cylinder 3 code throws a wrench into that mode of thought.

Using Volumetric Efficiency to Determine the Health of an Engine

Using an OBD II scan tool/dynamometer simulation/calculation program that can graph volumetric efficiency (VE) over rpms, contributor Glen Beanard devised a test sequence using real-world vehicles. This article takes you step by step through his diagnostic process.

Intermittent Engine Misfire Analysis

Even for an experienced diagnostic technician, attempting to diagnose an intermittent misfire condition that occurs only under specific driving conditions can be a frustrating exercise. Contributor Gary Goms breaks it down, and includes tips for using a scan tool and a lab scope.

5 Mistakes Newbie Tire Techs Make

Nothing can turn a new tech into a veteran but time and experience, and often that experience is going to come from making mistakes – sometimes real bad ones – and learning from them (you hope). By addressing these most common mistakes right away with new tire techs, the worst of them can be avoided.

Rivet Bonding Comes Full Blast

Now that rivet bonding is in the mainstream with the Ford F-150, it’s time for shops to look into training and equipment for this repair process.

Other Posts

‘Test Before Touch’ – It’s No Waste of Time

To help reduce the headaches involved in servicing TPMS, it’s important to use the “Test Before Touch” procedures in your shop. Used properly, TBT can form a strong foundation for everything else you do regarding TPMS, reduce complexity and help you educate and keep your customers.

The Right Diagnostic Tools Save You From Extensive Disassembly Time

It can sometimes be difficult to make the correct diagnosis for a hard-to-start complaint. And diagnostic time may be extensive — and expensive. This article shows how certain tools have the ability to automatically analyze waveforms for you.

Know the Specs for Your Social Media Accounts

If you’re doing social media, are you doing it effectively? Are your accounts set up correctly? Are you posting often enough? Mark Claypool answers some questions.

Top 5 Tools: Kenny Younkins, Ken’s Auto Service Center

Kenny Younkins, owner Related Articles – Streamlight Launches Stinger Color-Rite Light – Streamlight Adds Two New Work Lights – New Master Series HL1000 and PL 500 from NEBO Lights Ken’s Auto Service Center Akron, OH While Ken first said his favorite tool is his fishing rod, he said in the shop he prefers these five:   Snap-on