Bar's Leaks Cooling System Treatment Now Available to Professional Vehicle Technicians
Connect with us
Close Sidebar Panel Open Sidebar Panel

Products

Bar’s Leaks Cooling System Treatment Now Available to Professional Vehicle Technicians

The product seals internal, external and coolant-to-oil leaks. It also stops leaks at the radiator tank seal, controls electrolysis and helps neutralize pH imbalance.

Advertisement

Chances are good that the next car or truck you work on today already has Bar’s Leaks Cooling System Treatment installed. Since 1951, many OEMs around the world have installed Bar’s Leaks right at the factory to prevent minor cooling system leaks, lubricate the water pump and inhibit the formation of rust and scale. These manufacturers rely on Bar’s Leaks to seal potential leak points at the head bolt threads, fittings and any casting imperfections, while also preventing porosity leakage.

The OEMs also have approved Bar’s Leaks Cooling System Treatment for use by their dealers. The tablets are sold under the Mopar, ACDelco and GM Car Care brands, among others. Now, these same cooling system treatment tablets are available to all professional technicians as Bar’s Leaks Professional DiFM Cooling System Treatment (p/n J-100).

Click Here to Read More
Advertisement

“Millions of cars built over the last 58 years have rolled out of showrooms with Bar’s Leaks Cooling System Treatment installed,” says Clay Parks, vice president of development for Bar’s Products, manufacturer of Bar’s Leaks. “From 1950s sedans to modern SUVs, Bar’s Leaks has proven to be a safe and effective cooling system stop leak and conditioner. We recommend installing — or reinstalling — it with every cooling system service.”

Bar’s Leaks Professional DiFM Cooling System Treatment protects the entire cooling system and keeps it clean. It seals internal, external and coolant-to-oil leaks. It also stops leaks at the radiator tank seal, controls electrolysis and helps neutralize pH imbalance.

Advertisement

Bar’s Leaks Professional DiFM Cooling System Treatment is available only to professional technicians. It is compatible with all brands of antifreeze, including conventional green or blue (silicate-based) and extended life red/orange or yellow (OAT/HOAT) coolant. It also works in systems containing only water. It is non-toxic and is harmless to all plastic, metals, hoses and connections. It can be installed at any cooling system service, including flush and fills, and parts replacement. The 5-gram tablets fully dissolve in minutes.

Bar’s Leaks Professional DiFM Cooling System Treatment is sold in bottles of 100 5-gram tablets. Dosage is four tablets per gallon of cooling system capacity. Like all Bar’s Leaks products, Professional DiFM Cooling System Treatment is made in the U.S.A. The label includes directions in both English and Spanish.

Advertisement

For more information about Bar’s Leaks Professional DiFM Cooling System Treatment, visit the Bar’s Leaks Professional DiFM website at www.barsleaksdifm.com or call the technician hotline at (800) 345-6572. The website offers a wealth of information, including product descriptions, tech sheets, material safety data sheets (MSDS), FAQs, company history, store locator, customer testimonials and contact information.

You can also follow Bar’s Products on Twitter at www.twitter.com/barsproducts.

Advertisement
Click to comment
Connect
Tech Shop Magazine