Import service providers can now help those customers that don’t want to spend hundreds of dollars to repair their failed rear air conditioning unit. AirSept’s Line Terminator kits, now available in metric sizes, allow shops to block off the line where it splits to go to the rear evaporator. The repair takes no more than five minutes and can be done without removing the line.
Technicians can install the unit under the hood at the front system “Y.” AirSept’s new Line Terminator creates an effective, permanent block on the line, eliminates refrigerant and oil pooling in the rear A/C line and helps maximize front A/C performance
New to the Line Terminator family are kits containing sizes for 8mm, 10mm, 12mm, 15mm and 16mm OD lines.
A state-of-the-art sealing sleeve is up to eight times wider than a standard O-ring. It seals against irregular tubing surfaces, preventing leak “travel” that can defeat narrow O-ring seals.
The wider sleeve also helps resist vibration that creates leaks. A slotted tension ring coupled with a tapered nut guarantees a tight grip on the tubing.
The Line Terminator works on aluminum or steel lines. Install it with an open-end wrench — no costly crimping tools required.
Visit www.airsept.com or call AirSept at 1-800-999-1051 or 678-987-0500 for more information.