Brake Performance Offers Slotted and Drilled Rotors for All Cars, Trucks and SUVs

Brake Performance Offers Slotted and Drilled Rotors for All Cars, Trucks and SUVs

Brake Performance grooved and drilled rotors feature special blind degassing holes, which greatly reduce chances of stress cracks common with competitors' completely cross-drilled rotors.

Brake Performance grooved and drilled rotors feature special blind degassing holes, which greatly reduce chances of stress cracks common with competitors’ completely cross-drilled rotors.

Full sweep scraper grooves help deglaze disc pads, and reduce fade. The grooves extend off the outer diameter of the rotor allowing dust and debris to be thrown clear off the braking system.

Premium quality solid European casing are TUV approved, X-Ray inspected, turned and balance tested on state-of-the-art computerized equipment for the highest level of performance.

Wide Apertures Slots: Expel dirt, dust and guarantee parallel pad wear.

Blind Drilled Holes: Offer Improved degassing without risk of cracks.

Precision Castings: CNC machined and balanced.

Black or Silver Zinc Coating: For great looks and reduced corrosion. Color remains in slots and dimples even after break-in.

For more information about these and other great Brake Performance products, call (866) 756-5536 or visit www.brakeperformance.com.

You May Also Like

Pulling Codes: Multiple Misfire Personalities

A vehicle fails an emission test due to a series of codes, with misfire activity found on cylinders 2, 4, 6, 8 and 3 – and a strange metallic sound can be heard when the rpms are raised. See how Carlton Banks solves this latest Pulling Codes case.

A Story of Codes P0302, 04, 06, 08 & 03
 

This month’s diagnostic journey begins with a 2008 Land Rover Discovery that is taken in to a local testing facility for an emission test and fails due to a series of misfire codes.

Misfire activity is found on cylinders 2, 4, 6, 8 and 3; at first glance this series of codes implies that there may be bank 2 issues, but the cylinder 3 code throws a wrench into that mode of thought.

Using Volumetric Efficiency to Determine the Health of an Engine

Using an OBD II scan tool/dynamometer simulation/calculation program that can graph volumetric efficiency (VE) over rpms, contributor Glen Beanard devised a test sequence using real-world vehicles. This article takes you step by step through his diagnostic process.

Intermittent Engine Misfire Analysis

Even for an experienced diagnostic technician, attempting to diagnose an intermittent misfire condition that occurs only under specific driving conditions can be a frustrating exercise. Contributor Gary Goms breaks it down, and includes tips for using a scan tool and a lab scope.

5 Mistakes Newbie Tire Techs Make

Nothing can turn a new tech into a veteran but time and experience, and often that experience is going to come from making mistakes – sometimes real bad ones – and learning from them (you hope). By addressing these most common mistakes right away with new tire techs, the worst of them can be avoided.

Rivet Bonding Comes Full Blast

Now that rivet bonding is in the mainstream with the Ford F-150, it’s time for shops to look into training and equipment for this repair process.

Other Posts

‘Test Before Touch’ – It’s No Waste of Time

To help reduce the headaches involved in servicing TPMS, it’s important to use the “Test Before Touch” procedures in your shop. Used properly, TBT can form a strong foundation for everything else you do regarding TPMS, reduce complexity and help you educate and keep your customers.

The Right Diagnostic Tools Save You From Extensive Disassembly Time

It can sometimes be difficult to make the correct diagnosis for a hard-to-start complaint. And diagnostic time may be extensive — and expensive. This article shows how certain tools have the ability to automatically analyze waveforms for you.

Know the Specs for Your Social Media Accounts

If you’re doing social media, are you doing it effectively? Are your accounts set up correctly? Are you posting often enough? Mark Claypool answers some questions.

Top 5 Tools: Kenny Younkins, Ken’s Auto Service Center

Kenny Younkins, owner Related Articles – New Colors for Mac Tools 2-pc. Silicone Tray Sets – Philips Xperion 6000 UV Pillar Earns Best New Tool Award – Continental Bundles Autodiagnos TPMS Tools, Sensors Ken’s Auto Service Center Akron, OH While Ken first said his favorite tool is his fishing rod, he said in the shop he