Dent Fix Equipment

The site provides an online resource where customers can not only learn how to use Dent Fix repair tools properly for a better repair but also an easy way to register for upcoming educational seminars, events and trade shows.

The sander is designed to lay flat on a panel while sanding and to reach areas with limited access or maneuverability.

The new Body Buggy makes the difficult task of moving a disabled vehicle simple and safe.

The DF-15DX Spot Weld Drill employs a fast and clean process to remove spot welds without damaging the underlying panel.

Every tool you need is all in one station that can be rolled to different bays in the shop.

Recreate the perfect body line tracing around extended wheel arches and other body lines.

The 10-ton pressure and included punching die allow for punching through boron steel in order to install flow-form rivets.

Cut and trim plastics, leather, cloth and wires along with numerous other automotive materials using these powerful cutting tools.

Capable of repairing most basic tears, gouges, cracks and some tabs, airless plastic welding will accomplish virtually all repairs that can be performed using adhesives.

A specially designed arm allows for more clearance and the finger sander to lay flatter against the surface.

The DF-900B Mini Aluspot Repair System from Dent Fix Equipment is designed to operate as the main welding unit or as satellite unit for repairing minor to moderately damaged aluminum panels.

Dent Fix introduced a video to show the Blind Rivet Adapter in use.

It’s essential to eliminate static from the environment—at every stage of painting—in order to avoid costly reworking.

The adapter allows the setting of blind rivets with diameters from 4.0 to 7.8 mm for aluminum and 4.0 to 6.4 mm for steel.

The AluArc’s gun is equipped with a linear motor that provides two independently adjustable grounds and control of the welding cycle.

The DF-EZ10 system is designed to punch a hole in the bumper or fender without damaging the paint.

Now, any shop can invest in the future and start repairing minor to moderately damaged aluminum panels.

The DF-900DX/E Aluspot Extended is the most complete aluminum repair station that is simple to use.

The specially designed curved head allows the user to apply leverage to remove clips with ease.

The EZ Nitro kit includes a nitrogen welder, storage cart, tank regulator, aluminum tape, heat gun holster, hand seamer and an assortment of plastic rods.

The kit now includes a knock down tool with two heads, 15 improved varieties of pulling nibs and hand T-puller for hand pulls.

A forked end makes removing clip hangers effortless and the reinforced neck gives the tool added strength for prying.

With nine interchangeable heads and the simple quick engage/disengage button feature, this hammer set is a versatile tool for shaping metal.

The pliers' groove nose offers superior spatter removal from the welding tip. Other features include gripping teeth for drawing out welding wire and a precision-machined cutting edge.

The E-Coat on the mating surfaces can be saved when using STRSW with the use of the Dent Fix Shunting Pliers. Simply remove the coating from only the outside surfaces, position the shunting clamp at the spot weld site, and the spot weld is made at the adjacent site.

Non-conductive coatings on steel, such as E-Coat, inhibit the completion of the spot weld. The E-Coat on the mating surfaces can be saved when using squeeze-type resistance spot welding (STRSW) with the use of the Dent Fix Shunting Pliers.

The rotational head allows for flexibility when reaching around to tough-to-reach areas. A slim profile also allows for rivet installation with minimal clearance.

The pressure and speed control increases accuracy and enables the rivets to be inserted without panel distortion. Ergonomic design allows for easy and comfortable use.

Because the lightweight aluminum hammers offer a more forgiving strike compared to heavier steel hammers, users are less likely to damage aluminum body panels. Genuine hickory oval handles provide a solid base with less chance of breakage.