
Categories:
News

Customize Your Inductor Kit – Series Now Available with Your Choice of Attachment
Customers can now "customize your kit" by choosing which Induction Innovations attachments they want when purchasing an Inductor Series Pro-Max, Max and Lite.

Induction Innovations Advises When to Replace Mini-Ductor Induction Heating Coils
While each coil will last for several hundred uses or more, subject to use, one sign that coils need to be replaced is if the fabric becomes noticeably brown.
Product News

Heat Metal Components Faster with Venom HP
The Venom HP Mini-Ductor allows users to release hardware from corrosion or thread lock compounds in a matter of seconds.

Heat Metal Faster with Induction Innovations' Venom HP
Remove nuts, bolts, bearings, graphics and more in seconds.

Heat Larger Metal Fasteners and Components Faster with Venom HP from Induction Innovations
The Venom HP Mini-Ductor series allows users to release hardware from corrosion or thread lock compounds in a matter of seconds, without the dangers of an open flame.

Induction Innovations Launches Highest Powered Mini-Ductor
Safely and rapidly heat hardware without a flame.

Induction Innovations Introduces New Mini-Ductor Bearing Buddy Coil Pack
The Bearing Buddy Coil Pack offers two different sized flexible coils and a heat-resistant mat, which helps extend the Bearing Buddy coil life by preventing abrasion and overheating of the coil.

Induction Innovations Introduces New Mini-Ductor Thin Wall Coil Pack
Induction Innovations, Inc. introduces the new Thin Wall Coil Pack, for use with the Mini-Ductor series. The Mini-Ductor product line allows users to release hardware from corrosion or thread lock compounds, without the dangers of an open flame.

Induction Innovations Introduces Mini Induction Heater
The Mini-Ductor Venom generates Invisible Heat to release ferrous and some non-ferrous metals from corrosion and thread lock compounds without the dangers of open flame.

Induction Innovations 5-Step Windshield Removal
A non-metallic tape wrapping protects the glass as the Glass Blaster quickly and cleanly heats and unseals the bond, allowing the glass to be removed from the outside, without touching the interior trim, and without the muscle power usually required.

Induction Innovations Customizable Inductor Kit
Induction Innovations customers can now customize their kits by choosing which attachments they want when purchasing an Inductor Series Pro-Max, Max and/or Lite.

Induction Innovations Offers Five-Step Windshield Removal with Induction Heat
The Glass Blaster releases urethane in hard-to-reach areas such as curves and deep pockets, where other glass tools can’t go. Back glass and windshields can be removed in as little as 10 to 15 minutes, and quarter glass in as little as three minutes.

Precise and Manageable Invisible Heat from Induction Innovations
Venom’s feature set allows users to repair vehicles and equipment faster, safer and more profitably, and to salvage parts normally discarded.

High Performance Induction Heating System from Induction Innovations
Release seized hardware from corrosion or thread lock compounds and other adhesives without the collateral damage and safety risks of an open flame.

Go Flameless with Induction Heat from Induction Innovations
Venom's lightweight, ergonomic, angled design allows for induction heat to access hard-to-reach places more easily.

Induction Innovations' Inductor Lite Gives More Control Over Induction Heat Levels
Using high frequency magnetic fields, the Inductor Lite utilizes Invisible Heat to easily remove parts bonded to metal, including adhesives, sealers, mechanical parts, dents and more.

Easily Loosen Corroded Fittings with Venom from Induction Innovations
Venom generates invisible heat to release ferrous and some non-ferrous metals from corrosion and thread lock compounds without the dangers of open flame and up to 90% faster – 3/4” nuts are turned red hot in less than 15 seconds.

Portable Invisible Heat From Induction Innovations
The Mini-Ductor is completely portable and works with a standard 12V battery pack or off of a car battery. This tool uses “invisible heat” to heat ferrous and some non-ferrous metals without the danger of an open flame.

Induction Innovations Brings Invisible Heat To Paintless Dent Repair
Induction Innovations has developed a PDR attachment (P/N U-111) to complement its line of high performance induction heating tools.
Video Posts

Inductor Max: Experience the Power of Induction Heating
Rapidly heat components while eliminating the dangers of an open flame.

Induction Innovations Video Features Mini-Ductor Venom Enhancements
The Venom generates invisible heat to release ferrous and some non-ferrous metals from corrosion and thread lock compounds without the dangers of open flame.
Is this your listing?
Need to update your listing? Click the link below to visit the update listing form. Please make sure to have your "PIN" number on hand. If you don't remember your "PIN" please contact us.