Mueller-Kueps USA

Made of high quality materials, this belt wrench allows you to tighten the strap to the size you need without denting the filter in the process

THREADING on thin ice? See how the Mueller-Kueps NOX Sensor Thread Restorer Kit can help.

This special tool is made to straighten the 1/4-in. brake line when it is bent.

The new hose clamp compressor aims to reduce the difficulty of removing or installing hose and spring clamps.

These magnets come in three weight categories and can lift between 1 and 6 lbs.

The neon green and black body allows you to spot the screwdriver from across the shop.

The top tray has protective bumpers to protect the car you’re working on.

Three different blade types provide you with the tools for cutting coolant hoses, zip ties, carpet, wire harnesses, plastic, door panels and more.

The drop-forged steel allows you to put enough pressure on the bolt or other connection to loosen it easily.

Use this file to clear the caliper prior to installing new brake pads to reduce premature wear on the brake pads.

Save time and prevent problems when replacing brake lines.

Burned in corrosion residues are completely removed from wheel and hub contact surfaces with a quick and easy process.

These durable bowls feature a very strong rubber-coated magnet, making it easy to use horizontally or vertically. Hang one from the car, hoist or place it on your cart without scratching the surface — giving you easy access to small parts while making sure you don’t lose them.

The kit provides 30 different bit sizes and shapes. Both sides of the bit are the same size, which means you really get 60 bits in total.

Not only is it small enough to reach into narrow spaces such as glow plug holes, it can also lift up to half a pound.

A twist on this popular tool gives access to difficult areas.

The Mueller-Kueps Multi-Function Micro Tool Kit, No. 604 230, can be used for removing O-rings, seals, connectors and spring rings.

This tool can access and adjust the rear axle toe without you having to remove the underbody.

Mueller-Kueps Quick-Lock Razor Scraper is unique because it reduces the time you spend on trying to remove and replace the blade.

The kit includes a brass brush for use on aluminum brake calipers, with soft brass bristles to ensure proper cleaning.

The bowl features an extra strong magnet and is available in neon, orange, dark blue and gray colors.

The plastic blades can be used on paint, while the steel blades can be used to remove adhesives and more from a variety of surfaces such as steel, glass, etc.

The thin edges of the pliers grip the wheel weight without damaging the aluminum, leaving no scratches or notches in the metal.

By using the puller system, you can extend the life of bearings through a simple and less frustrating removal.

Mueller-Kueps designed a kit, which has reduced the discs needed for resetting to just two.

The Mueller-Kueps Hydraulic Twin/Triple Leg Puller System is ideal for removing all kinds of shaft-fitted parts including bushings, wheels, bearings, gears and pulleys.

The Vibro-Impact separator reduces the amount of force needed to remove the joint and does not damage the ball joint boot in the process.

This set includes all the tools needed to safely remove the terminal part of the glow plug electrode without damaging the cylinder head.

The bendable head of this wrench gives you more turning space, so you can use it in any hard-to-reach area or a narrow space, not exclusively for the brake caliper.

The kit includes an XL slide hammer, a drop forged flange and a drop forged hook, which in combination with the XL slide hammer, makes sure that a lower ball joint can be removed with one blow.

This wrench has the grip you need to hold onto any round or hex surface from the tie rod. Included are two handles, the longer handle gives you the maximum leverage while the shorter handle allows you to use the tool in tight spaces.

With a length of 340 mm, you can reach in with a wrench size of up to 24 mm.

This set incorporates durable spring steel, a rubberized grip and a polished mirror finish, giving the clip lifters a robust strength and an exceptional grip.

Designed to clean the inner wheel contact surface, it should be used on the inside of an aluminum rim, prior to wheel balancing.

The Wheel Hub Grinder Type I from Mueller-Kueps delivers a special grinder for cleaning the wheel centering device as well as the attachment area between the wheel and hub.