Connect with us

Buyer’s Guide

Need to update your Buyers Guide Listings?

Click Here

Not Listed? Add your company information.

Click Here

Steck Manufacturing

Steck Manufacturing logo
Phone: 937-222-0062Fax: 937-222-6666
Contact: John Brillhttp://www.steckmfg.com
1115 S. Broadway
Dayton OH 45417

Recent Products

Remove Fender Flares with Steck's Retainer Clip Release Tool

by TechShop Staff Writers - 03-23-2020

The Steck Manufacturing Retainer Clip Release Tool (21715) makes the removal of fender flares and rocker moldings a breeze by releasing the clips that attach the moldings from outside. No more breakin...

Steck Tools’ Parts Cart Allows Dual-Sided Access

by TechShop Staff Writers - 01-17-2020

Steck Tools’ Pro Folding Parts Cart (P/N 35950) is a versatile parts cart featuring a unique folding mast to allow dual-side parts access. Locking pin fasteners allow shops and technicians to c...

Steck Manufacturing Introduces Extended Clip Release Tool

by TechShop Staff Writers - 08-13-2019

Accessing door panel clips when removing the door panel can be a challenge, especially because of how deep they are located.  Made in the USA, the Extended Clip Release Tool, part number 217...

Steck Antenna Wrench II Replaces Nut Socket Wrench Set with 1 Tool

by TechShop Staff Writers - 01-07-2019

The Steck Antenna Wrench II (21650) works independently or in conjunction with Steck's original Antenna Wrench (21600). The Antenna Wrench II is laser cut from rugged steel then grit blasted and...

Steck Shaper Kit Brings Deformed Parts Back to Original Shape

by TechShop Staff Writers - 06-01-2018

The Steck Panel Shaper Kit (20046) is an air-hammer-driven set that consists of three self-lubricating nylon-reinforced heads that allow technicians to reach deep areas and bring deformed parts b...

Steck Offers Tool Kit for Aluminum Body Work

by TechShop Staff Writers - 01-15-2018

Perform body work on aluminum vehicles with the Aluminum Door Skinning with AL Skin Zipper and SPR Bundle Tool Kit (21899) from Steck Manufacturing. Skinning aluminum doors and working on non-struc...

Steck Introduces Right Angle Sure Grip Trim Clip Plier

by TechShop Staff Writers - 06-22-2017

Removing trim clips without breaking them is a challenge with ordinary pliers, especially in tight areas. Steck Manufacturing Company has released another specialty tool to solve this problem. ...

11 Tools for Aluminum Body Work from Steck Manufacturing

by TechShop Staff Writers - 01-13-2017

Steck Manufacturing Co. offers its Aluminum Door Skinning with AL Skin Zipper and SPR Bundle Tool Kit (21899). Skinning aluminum doors and working on non-structure quarter panels requires techn...

New Wrench for Hard-to-Remove Antennas from Steck

by TechShop Staff Writers - 04-27-2016

Removal of antennas on vehicles can become difficult, especially with the raised hood design (Dodge pickup) that prevents many tools from allowing access to the bezel nut. Antenna Wrench II (P/N 21...

Steck’s Soft Strike Dolly Cover Protects Aluminum Components

by TechShop Staff Writers - 08-05-2015

Installing aluminum door skins requires a hammer and dolly for corners and body lines, but using everyday steel tools can cause galvanic corrosion on aluminum components. Steck Manufacturing Co...

Work Safely on Steel or Aluminum with Steck’s Soft Strike Dolly Cover

by TechShop Staff Writers - 06-23-2015

Installing aluminum door skins requires hammer and dolly for corners and body lines but using everyday steel tools can cause galvanic corrosion on aluminum components. Steck Manufacturing Company o...

Reduce Fatigue with Steck’s Skin Zipper2 Door-Skinning Tool

by TechShop Staff Writers - 05-20-2015

Hem steel door window flange openings with minimal arm fatigue with Steck Manufacturing’s Skin Zipper2 (P/N 21894). With this new air hammer-driven door-skinning tool, technicians can now skin th...

Solving the Self-Piercing Rivet Problem with Steck's New Tools

by TechShop Staff Writers - 01-07-2015

When skinning aluminum doors and working on non-structure quarter panels, technicians will be required to remove and install SPRs (Self-Piercing Rivets) as part of the repair process. Steck has two...

Steck’s Axle Popper Helps Break Loose Stubborn Half Shafts

by TechShop Staff Writers - 09-29-2014

Steck Manufacturing Company has released the Axle Popper (P/N 71415). Break loose half shafts from transaxles on FWD cars using your air hammer. Axle Popper II is Steck’s air tool version of its ...

Recent News

Videos


Connect with us
Connect