BendPak, Inc.

BendPak logo
1645 E. Lemonwood Drive
Santa Paula CA 93060
United States
Phone: 805-933-9970Fax: 805-933-9160
Categories: Alignment Racks, Brake Service Equipment, Compressors, Creepers, Jacks & Hydraulics, Lifts, Parts Cleaners, Shop Equipment, Tool & Shop Storage, TPMS / Tire / Wheel Service Equipment & Tools, Transmission & Powertrain System, Vehicle System Tools & Equipment

Recent Products

BendPak to Showcase New Lift Technology at SEMA

by TechShop Staff Writers - 10-19-2018

BendPak will attend SEMA for four full days of car enthusiast heaven in Las Vegas. BendPak's low-ceiling GrandPrix lift will be on full display, as well as QuickJack and the Autostacker parking lift. ...

Maximum Alignment Convenience with BendPak’s HDS-Series Alignment Lifts

by TechShop Staff Writers - 08-21-2017

BendPak’s HDS-Series alignment lifts are engineered to meet the strenuous demands of even the toughest professional lifting jobs, says the company. The HDS-14LSX alignment system features fro...

BendPak Wins Bid to Supply Automotive Service Equipment to Government

by TechShop Staff Writers - 03-10-2017

BendPak Inc. recently won a contracted bid to provide municipalities and government buyers with lifts, wheel balancers, tire changers and brake lathes. The bid was awarded through the National ...

Ranger Wheel Balancer Features Faster Speeds While Taking Up Less Space

by TechShop Staff Writers - 02-06-2017

The DST30P is a cost-effective hybrid unit that offers the most precise readings you’ll ever generate from a wheel balancer, says the company. The DST30P handles wheels up to a 30” diameter...

BendPak Enhances Two-Post Car Lift Line

by TechShop Staff Writers - 06-06-2016

BendPak recently unveiled an entirely new series of two-post lifts that feature two-stage telescoping screw pads. The recent total model overhaul includes other design enhancements that focus on str...

BendPak-Ranger Introduces 3D Wheel Alignment System

by TechShop Staff Writers - 07-22-2015

Ranger Products recently introduced its new Target 3DPro 3D Imaging Wheel Alignment System for domestic and import cars and trucks. Lightweight impact-resistant wheel targets and high-resolution to...

BendPak's Powerful Ranger Oil Filter Crusher Goes Green To Save Green

by TechShop Staff Writers - 05-19-2015

In just 20 seconds, Ranger Products’ high-powered RP-20FC Oil Filter Crusher applies 10 tons of pure, air-operated pressure to just about any used oil filter, easily reducing it to 25% of its origin...

Ranger Introduces New Automatic Leverless Tire Changer

by TechShop Staff Writers - 07-23-2014

Ranger Products, a division of BendPak Inc., is bringing another new tire changer to market. Its latest R80DTXF tire changer features an automatic bead lifter, variable speed turntable and bilateral b...

Ranger Introduces New Automatic Leverless Tire Changer

by TechShop Staff Writers - 04-15-2014

Ranger Products, a division of BendPak Inc., is bringing another new tire changer to market. Its latest R80DTXF tire changer features an automatic bead lifter, variable-speed turntable and bilateral b...

Ranger Introduces New Multi-Speed Tire Changer

by TechShop Staff Writers - 02-18-2014

Ranger Products, a division of BendPak Inc., is bringing another new tire changer to market. The company’s new R980ATF is a variable-speed model that performs masterfully on a wide variety of wh...

BendPak's New Low-Rise Lift Picks Up Where Others Leave Off

by TechShop Staff Writers - 01-30-2014

BendPak recently unveiled its new LR-5T — a 10,000-lb. capacity low-rise lift that accommodates passenger cars and trucks thanks to a newly designed lift platform, specialty adapters, wider drive-...

The QuickJack By Ranger Is the Ultimate Motorsports Jack System

by TechShop Staff Writers - 10-15-2013

Ranger Products, a division of BendPak, recently unveiled its new QuickJack portable jack system that makes vehicle maintenance — on the track and off — convenient and lightning fast. The 3,500-lb...

Recent News

BendPak Set to Begin Construction on New Facility Early 2018

by TechShop Staff Writers - 10-27-2017

  BendPak Inc. is set to expand for the second year in a row with a 50,000+ sq. ft. facility. The move, coming on the heels of a massive expansion just months prior, marks a new chapter fo...

BendPak Opens New 70,000-sq.-ft. Warehouse

by TechShop Staff Writers - 03-06-2017

   BendPak Inc. has added yet another large-scale expansion to its complex. After nearly seven months of construction, the completed 70,000 sq. ft. shipping and receiving facility, which sits jus...

Blue No More, BendPak Goes Gray

by TechShop Staff Writers - 11-17-2016

BendPak is switching the color of its lifts from its traditional blue to gunmetal gray. According to the company, “People know us well enough that we don’t need to announce our presence eve...

Bendpak Breaks Ground On New Warehouse and Shipping Complex

by TechShop Staff Writers - 10-30-2014

    BendPak, Inc. announced the recent groundbreaking to celebrate beginning construction of a 67,000 square-foot multipurpose warehouse and shipping center located on 3.7 acres of...

Videos


Hunter Engineering Company

Hunter Engineering logo
11250 Hunter Drive
Bridgeton MO 63044
United States
Phone: 314-731-3020Fax: 314-731-1776
Contact: Robert Brucehttp://www.hunter.com
Categories: Alignment Racks, Brake Service Equipment, Lifts, Shop Equipment, TPMS / Tire / Wheel Service Equipment & Tools, Vehicle System Tools & Equipment

Recent Products

Hunter Engineering Introduces Quick Tread Edge at SEMA

by TechShop Staff Writers - 10-30-2018

Hunter Engineering Company will showcase its next-generation drive over tire tread depth measuring tool, Quick Tread Edge, at the 2018 SEMA Show on Oct. 30 – Nov. 2 (South Hall, Booth 41013). ...

Hunter Engineering to Showcase Touchless Inspection Technology at SEMA

by TechShop Staff Writers - 10-30-2018

Hunter Engineering Company will showcase its new unmanned alignment inspection system, Quick Check Drive at the 2018 SEMA Show on Oct. 30 – Nov. 2 (South Hall, Booth 41013). Released in July ...

Hunter Engineering Launches 2 Center-Clamp Tire Changer Models

by TechShop Staff Writers - 08-16-2018

Hunter Engineering Company has launched its latest family of center-clamp tire changer models, the TC37 and TC39. Both models offer immense features and value in the growing segment of mid-rang...

Hunter Engineering Launches Quick Check Drive — a Touchless Alignment Inspection System

by TechShop Staff Writers - 07-18-2018

https://www.youtube.com/watch?v=d4HeoAwSRNM Hunter Engineering Co. launched its latest vehicle service innovation, Quick Check Drive – a touchless alignment inspection system that provides insta...

Hunter Engineering Introduces Quickgrip Adaptors for Fast Alignment

by TechShop Staff Writers - 05-14-2018

Hunter introduced the WinAlign HD QuickGrip adaptors that provide faster installation to speed alignment service and prevent rim damage with no metal-to-metal contact. With the WinAlign and QuickG...

Hunter Introduces New Low-profile, High-capacity Lift Rack

by TechShop Staff Writers - 04-20-2018

Hunter's new RX14 Scissor Lift provides massive capacity with a small footprint. The RX14 Fully Integrated Alignment speeds alignment service by 60 percent with synchronized aligner and lift ra...

Hunter's Revolution Tire Changer Offers Autonomous Operation

by TechShop Staff Writers - 04-18-2018

The Revolution tire changer with WalkAway capability from Hunter Engineering features 80 seconds of autonomous bead breaking and demounting that can be performed without an operator present. Th...

Hunter Engineering Presents Tire Changer T.K.O. Video Series

by TechShop Staff Writers - 03-15-2018

See the TCX Table-Top Tire Changer series in action in this informative new video series. Hunter's tire changer scientists conducted a series of comparison tests to demonstrate the mass, power, spee...

Hunter Releases Educational Video to Answer the Question: Why Do Cars Need Wheel Alignment?

by TechShop Staff Writers - 02-07-2018

Hunter has released an educational video to answer the common question: "Why do cars need wheel alignment?" to explain the purpose and function of wheel alignment procedures and the importance of pr...

Hunter Road Force Elite Balancer Update 4.0 Released

by TechShop Staff Writers - 11-29-2017

Miscentering during wheel balancing is a major cause of improper balancing and customer comebacks. Hunter’s Road Force Elite features Automatic CenteringCheck technology with new 4.0 software th...

Hunter's Revolution Tire Changer's WalkAway Capability Reduces Tire Changing and Balancing Times

by TechShop Staff Writers - 11-06-2017

The Revolution tire changer with WalkAway capability features 80 seconds of autonomous bead breaking and demounting that can be performed without an operator present. The Revolution allows the operato...

Hunter Releases Next-Generation WinAlign Consoles

by TechShop Staff Writers - 08-28-2017

Hunter introduces the next generation of WinAlign consoles, WA500 and WA600. The new consoles feature Hunter’s new HW2 PC running Windows 10 and WinAlign 15.1 software. The HawkEye Elite aligner ...

Hunter Releases New Quick Tread Console for Automatic Inspection Technology

by TechShop Staff Writers - 08-16-2017

Hunter’s Quick Tread inspection technology automatically measures tire tread depth and captures vehicle identification in seconds as motorists drive into the service lane. The new, compact console p...

Hunter Quick ID Vehicle Identification Technology Accelerates Inspection Times

by TechShop Staff Writers - 06-13-2017

Technicians can accelerate Hunter vehicle inspections with Quick ID. The new technology automates vehicle identification, saving valuable time and labor. Quick ID instantly identifies the vehic...

Time-Saving and Ease-of-Use Accessories Included with Hunter TCX625 Plus HD Tire Changer

by TechShop Staff Writers - 05-26-2017

Hunter’s TCX625 Plus HD combines compact size with a unique mount/demount roller mechanism to provide high performance servicing of heavy-duty, over-the-road truck assemblies and includes severa...

Hunter Engineering Offers Compact Inspection Lane Footprint Option

by TechShop Staff Writers - 04-26-2017

The Quick Check inspection lane and Quick Tread drive-over tread depth system from Hunter Engineering Company now feature a 25% smaller footprint option. Now customers with tighter space requir...

Hunter Releases New Mount Head for Table-Top Tire Changers

by TechShop Staff Writers - 01-03-2017

Hunter’s new plastic mount head for tabletop tire changers is optimized for today’s wheels. Raised spoke wheels and clad wheels that can challenge other mount heads are simple for Hunter’...

Hunter Engineering’s Updated Tire Changer Features Enhanced Split-Bead Roller System

by TechShop Staff Writers - 12-05-2016

Updates to Hunter Engineering Company's TC3700 tire changer enhance ease-of-use with a new bead roller positioning system, says the company. The new controls allow the operator to easily pre-posit...

Hunter Engineering Releases New AutoComp Elite Brake Lathe

by TechShop Staff Writers - 11-16-2016

Hunter has released the new AutoComp Elite brake lathe featuring automatic compensation technology. The patent-pending AutoComp compensation system directly determines the position of the internal...

Perform Alignment Checks with Proper Tire Pressure on Hunter Engineering's Inflation Station

by TechShop Staff Writers - 10-25-2016

Hunter Engineering Co. has launched a new Inflation Station that is compatible with its Quick Check system. The station may also be installed as an independent system, the company said. The Inf...

Hunter Quick Tread Adds Enhanced Flush Mount Design

by TechShop Staff Writers - 10-10-2016

Hunter Engineering Co.’s Quick Tread system is now available in a new flush mount design. According to Hunter, the new design eliminates obstructions or obstacles in the inspection lane and h...

Hunter HD PowerSlide Turnplates Available In Flush Mount Configuration

by TechShop Staff Writers - 06-22-2016

Hunter Engineering’s WinAlign HD alignment system now offers PowerSlide turnplates in a flush mount configuration as a component of Fully Integrated Alignment (FIA). New flush mount PowerSlide ...

Hunter's Road Force Elite Features Patented Vision System

by TechShop Staff Writers - 04-28-2016

The new Road Force Elite is Hunter’s fastest diagnostic wheel balancer and performs both a traditional balance and Road Force Measurement in less time than it takes to complete a conventional balanc...

Updates to Hunter's TCX625 Heavy-Duty Tire Changer Reduce Service Speeds

by TechShop Staff Writers - 02-23-2016

The updated TCX625HD from Hunter Engineering features a drop down inner roller to reduce service time by 25% and increase ease-of-use. The pedal-controlled inner roller saves the operator time and ...

Hunter's Quick Check Now Includes Heavy-Duty Battery Clamps

by TechShop Staff Writers - 02-03-2016

Hunter’s battery tester now offers optional heavy-duty clamps. These new battery clamps were designed with increased strength and durability, to hold-up in today’s tough shop environment. H...

Hunter Engineering Showcases New Aligner Console Handheld Remote With Enhanced Features

by TechShop Staff Writers - 01-06-2016

At SEMA 2015, Hunter previewed its enhanced aligner console handheld remote, which features an integrated flashlight and numeric keypad to increase functionality. Handheld remote improvements allow...

Hunter WinAlign Consoles Now Controlled From Any Mobile Device

by TechShop Staff Writers - 12-08-2015

  Hunter’s WinAlign consoles can now be viewed and operated remotely from any mobile device, making the aligner console more convenient and flexible than ever. Using the Splashtop rem...

Hunter’s New Auto34S Features Slim Design, Enhanced Controls

by TechShop Staff Writers - 11-16-2015

Hunter’s new Auto34S features a space saving, functional design that makes this powerful tire changer even easier to use. The ergonomic Auto34S features an air powered, push-button control that o...

Hunter’s Updated Revolution Tire Changer Features Smaller Footprint, Expanded Capabilities

by TechShop Staff Writers - 11-03-2015

  New updates to the Revolution, Hunter’s fully automatic tire changer, have reduced the unit’s footprint by 25% and enhanced ease-of-use. The Revolution’s updated console is now inte...

Extra-Wide Runways Featured On Hunter’s Four-Post Lift

by TechShop Staff Writers - 10-13-2015

Hunter’s L451 four-post lift now features extra-wide 26” runways. The new generation four-post lift family is available in long or standard runway length and open- or closed-front configurations. ...

Hunter’s QuickComp Lathe's Computerized Compensation Adjusts For Lateral Runout

by TechShop Staff Writers - 09-17-2015

Hunter Engineering Company’s QuickComp lathe features a two-way adjustable compensation adaptor that works with Hunter’s patented ProComp computerized compensation to adjust for lateral runout of ...

Hunter’s Quick Tread Now Available In Flush Mount Configuration

by TechShop Staff Writers - 09-08-2015

First previewed for customers at NADA 2015, Hunter Engineering Company announce the Quick Tread drive-over tread depth unit is now available in a flush mount configuration. The flush mount system feat...

Hunter Offers Leverless, Center-Clamp Tire Changer

by TechShop Staff Writers - 06-22-2015

Hunter Engineering Company has introduced the TC3900 tire changer, a high-performance center-clamp tire changer with a bead press arm to assist in mounting difficult assemblies. The TC3900 also fea...

New Enhancements Made to Hunter's Tire Changer

by TechShop Staff Writers - 05-21-2015

Hunter Engineering’s popular TC3700 model center-clamp tire changer has been upgraded to handle today’s tires and wheels even better. A new split roller, bottom bead demount system assists demo...

Hunter Offers New Generation Advanced Tabletop Tire Changers

by TechShop Staff Writers - 05-05-2015

New generation TCX57 tabletop tire changers from Hunter Engineering include several enhanced features for tremendous power and control, according to the company. Building on the TCX575 family, the ...

Faster and Easier Caster Measurements with Hunter’s new WinAlign 14.3 Software

by TechShop Staff Writers - 02-13-2015

Hunter’s new WinAlign 14.3 software reduces the number of steers required to obtain caster measurements, increasing the efficiency and speed of the alignment procedure. Rather than installing the...

Hunter’s Quick Tread Produces Fast, Accurate Tread Depth Readings

by TechShop Staff Writers - 11-25-2014

Hunter Engineering Company announces its new Quick Tread drive-over tread depth system, which uses point cloud technology to automatically measure the tread depth of each tire without a time loss....

New Foot-Pedal-Operated Wheel Lift for Fast and Accurate Wheel Placement

by TechShop Staff Writers - 11-05-2014

Hunter’s new style wheel lift, which is an optional feature on all Hunter wheel balancers, is now operated by a foot pedal, allowing the operator to lift and lower the tire hands free. New wheel ...

Hunter Debuts New HawkEye Elite Alignment

by TechShop Staff Writers - 03-08-2011

Hunter’s HawkEye Elite systems bring Hunter customers unprecedented productivity and other profitable advantages. New and patented QuickGrip adaptors and three-dimensional targets accelerate serv...

Recent News

Hunter Engineering Enhances Connected Equipment Capabilities

by TechShop Staff Writers - 10-09-2018

Hunter Engineering Co. has announced advancements to its online business intelligence tool, HunterNet. First introduced in 2002, HunterNet provides real-time data to shops through equipment re...

Hunter Engineering, AutoVitals Announce New Inspection Integration

by TechShop Staff Writers - 10-02-2018

Hunter Engineering Company and AutoVitals announced a new integration with their vehicle inspection technology. The joint integration empowers service providers to quickly present inspection findi...

Hunter Announces Integration of FrogData Action Analytics to Quick Check Inspection System

by TechShop Staff Writers - 03-21-2018

Hunter Engineering Co. has announced the integration of FrogData Action Analytics into the Quick Check inspection system. According to the company, the new system will help shops to maximize serv...

Hunter Engineering Featured on Performance TV and Velocity

by TechShop Staff Writers - 01-24-2018

  Hunter Engineering is being featured by Masters Entertainment: Perfomance TV and Brenton Productions: Velocity through February 2018. Hunter Engineering showcased 20 new and enhanced product...

Hunter Releases Revolution with WalkAway Operation Video

by TechShop Staff Writers - 12-28-2017

See the Revolution tire changer with WalkAway operation in action with a new video that features autonomous bead breaking and demounting that can be performed without an operator present. Click...

Hunter Engineering Offers Online Self-Study Program

by TechShop Staff Writers - 08-02-2017

Hunter Engineering is now offering Hunter University, a free, comprehensive online self-study program for technicians and industry professionals. “This educational tool is an easy and effecti...

Hunter Engineering Launches Completely Redesigned Hunter.com

by TechShop Staff Writers - 07-10-2017

Hunter Engineering has launched a completely redesigned Hunter.com. The new site places even better emphasis on Hunter’s local teams and industry leading products, says the company. One click...

Hunter Quick Tread Console Measures Tire Tread Depth in Seconds

by TechShop Staff Writers - 06-27-2017

Hunter Engineering Co. has released a new console for its Quick Tread inspection technology that automatically measures tire tread depth and captures vehicle identification in seconds. The new, com...

Hunter’s Quick Check and Quick Tread Integrate with BOLT ON TECHNOLOGY

by TechShop Staff Writers - 03-08-2017

Hunter Quick Check and Quick Tread inspection systems now feature integration with Mobile Manager Pro by BOLT ON TECHNOLOGY, a digital multi-point inspection tool featuring color-coded results and...

Hunter Engineering Showcases WinAlign 15.0 Software

by TechShop Staff Writers - 01-30-2017

Hunter Engineering has introduced WinAlign version 15.0, which has many enhancements including support for Safety System Alignment and Quick ID. In addition to a mechanical alignment, manufactu...

Provide Customers with a Diagnostic Health Report from Hunter and Identifix

by TechShop Staff Writers - 12-20-2016

    Hunter Engineering’s Quick Check inspection system is now enhanced with a state-of-the-art Diagnostic Health Report powered by Identifix. Quick Check, along with the Ident...

Hunter’s Quick Check and Quick Tread Fully Integrate with AutoServe1

by TechShop Staff Writers - 12-09-2016

Hunter Engineering’s Quick Check and Quick Tread systems now fully integrate with the AutoServe1 complete vehicle inspection and customer communication system. This allows shops to immediatel...

Hunter Kicks Off Social Media Contest

by TechShop Staff Writers - 08-11-2016

Hunter Engineering is giving away trips to the 2016 SEMA Show as well as the chance to win a SmartWeight Touch wheel balancer as part of a social media contest. Shop owners can enter the contest by...

Hunter Quick Check and Quick Tread Are Integration-Ready

by TechShop Staff Writers - 05-18-2016

  Hunter Engineering announces the Quick Check inspection system and Quick Tread tread depth measurement system are integration-ready. Quick Check instantly sends vehicle inspection data t...

Hunter Quick Check and Quick Tread Now Seamlessly Integrate with AutoPoint

by TechShop Staff Writers - 04-14-2016

Hunter Engineering’s Quick Check and Quick Tread now seamlessly integrate with Solera's AutoPoint. The Hunter inspection results are automatically paired with the complete electronic MultiPoint i...

Choose the Right Tire Changer for Your Shop with Hunter's Decision Guide

by TechShop Staff Writers - 03-11-2016

Hunter has released a new Tire Changer Decision Guide to highlight the benefits and features of different tire changer models. It is important for shops to find a tire changer that is a good match for...

Hunter's Social Media Contest Includes Trips to SEMA 2015

by TechShop Staff Writers - 08-04-2015

Hunter Engineering has launched a new, two-part social media contest that offers trips to SEMA 2015 and the chance to win a free SmartWeight Touch wheel balancer at the show. Before SEMA, two shops...

Hunter’s HawkEye Elite Alignment System Approved by Mercedes-Benz

by TechShop Staff Writers - 03-18-2015

Mercedes-Benz has approved Hunter’s HawkEye Elite alignment system for use in their workshops worldwide. HawkEye Elite uses four precision cameras to measure the position and orientation of targe...

Hunter Releases New Technical and Training-Specific Channel on YouTube

by TechShop Staff Writers - 01-27-2015

Hunter Engineering Company has launched a new technical and training channel on YouTube, called the Hunter Learning Channel. The Hunter Learning Channel features extensive training video playlists ...

Videos


Cornwell Quality Tools

667 Seville Road
Wadsworth OH 44281
US
Phone: 330-321-8356Fax: 330-336-3337
Categories: A/C, A/C & Cooling System Tools & Equipment, Accessories, Air Tanks, Air Tools, Alignment Racks, Basic Mechanic Tools, Battery Chargers, Body Shop Equipment, Brake Service Equipment, Chemicals, Collision Industry Segment, Compressors, Cordless Tools, Creepers, Diagnostic Testing Equipment & Tools / Scan Tools, Electric Tools, Electrical System Test Equipment, Engine & Fuel System, Hand Tools, Induction Heaters, Jacks & Hydraulics, Leak Detection, Lifts, Lube & Fluid Equipment, Machines -- Other, Paint & Body Shop Tools, Parts Cleaners, Power Tools and Accessories, Pressure Washers, Reels & Accessories, Repair Information & Training, Shop Climate (Heaters, Fans, Etc.), Shop Equipment, Shop Safety/Personal Protection, Shop Supplies, Shop Supplies & Other Products, Specialty Tools, Surface Prep, Tool & Shop Storage, TPMS / Tire / Wheel Service Equipment & Tools, Transmission & Powertrain System, Vehicle Appearance, Vehicle System Tools & Equipment, Welding, Work Lights / Flashlights

Recent Products

Complete Starting and Charging System Analysis from Cornwell Quality Tools

by TechShop Staff Writers - 05-02-2017

Cornwell Tools introduces the ESC725 Digital Battery and Electrical System Analyzer, which performs a complete starting and charging system analysis along with a diagnosis of battery condition. ...

Cornwell Tools Digital Battery & Electrical System Analyzer with Printer

by TechShop Staff Writers - 02-08-2017

Cornwell Tools introduces the ESC726 Digital Battery & Electrical System Analyzer with printer. ESC726 performs a complete starting and charging system analysis along with a diagnosis of ba...

Cornwell Tools' Tool Cart Keeps Tools Where You Need Them

by TechShop Staff Writers - 10-03-2016

Cornwell QualityTools’ CTBMM100BL - Pro Series Cart features four bumpers that help prevent dents and dings; an exclusive push handle; four 5” x 2” casters, two locking and two non-locking; and ...

Cornwell Tools Offers Metric Stubby Flex Ratcheting Box Wrench Set

by TechShop Staff Writers - 06-15-2015

Cornwell Tools offers its 5-Piece Metric Stubby Flex Ratcheting Box Wrench Set (CRWSF5MSA). The multi-drive 12-point design can be used on 6-point, 12-point, square, Torx, spline and even rounded f...

Recent News

Videos


Greg Smith Equipment Sales Inc.

5800 Massachusetts Ave.
Indianapolis IN 46218
United States
Phone: 317-542-0662Phone: 800-262-1950Fax: 317-542-1448
Contact: John Temple http://www.gregsmithequipment.com
Categories: Alignment Racks, Lifts, TPMS / Tire / Wheel Service Equipment & Tools

Recent Products

Recent News

Videos


Hydra-Lift Industries, Ltd.

#132-15028-32nd Ave
Surrey BC V4P 1A3
Canada
Phone: 800-387-5718Fax: 604-560-2235

Mac Tools

505 N. Cleveland Ave.
Westerville OH 43082
United States
Phone: 800-MAC-TOOLS
Categories: A/C, A/C & Cooling System Tools & Equipment, Accessories, Air Tanks, Air Tools, Alignment Racks, Basic Mechanic Tools, Battery Chargers, Body Shop Equipment, Brake Service Equipment, Chemicals, Collision Industry Segment, Compressors, Cordless Tools, Creepers, Diagnostic Testing Equipment & Tools / Scan Tools, Electric Tools, Electrical System Test Equipment, Engine & Fuel System, Hand Tools, Induction Heaters, Jacks & Hydraulics, Leak Detection, Lifts, Lube & Fluid Equipment, Machines -- Other, Paint & Body Shop Tools, Parts Cleaners, Power Tools and Accessories, Pressure Washers, Reels & Accessories, Repair Information & Training, Shop Climate (Heaters, Fans, Etc.), Shop Equipment, Shop Safety/Personal Protection, Shop Supplies, Shop Supplies & Other Products, Specialty Tools, Surface Prep, Tool & Shop Storage, TPMS / Tire / Wheel Service Equipment & Tools, Transmission & Powertrain System, Vehicle Appearance, Vehicle System Tools & Equipment, Welding, Work Lights / Flashlights

Recent Products

Mac Tools Offers 6 New Impact Wrenches

by TechShop Staff Writers - 05-01-2018

Mac Tools added six new tools to its air impact family. Four high-performance impact wrenches were added with two standard air impact wrenches, both consisting of 1/2” and 3/8” drive sizes. The ...

Advanced Digital Multimeter from Mac Tools

by TechShop Staff Writers - 03-12-2018

Mac Tools offers its Advanced Digital Multimeter (EM823), which offers Bluetooth and USB communication, battery and charging system analysis and advanced measure for sensor and actuators. The h...

Mac Tools Jacket: Stay Warm with the Push of a Button

by TechShop Staff Writers - 02-07-2018

  The 20V MAX* Soft-Shell Heated Jacket from Mac Tools features a durable wind- and water-resistant shell; four heat zones: neck, chest, waist and middle-back; and an LED controller offers thr...

Variety of Pliers Sets Available from Mac Tools

by TechShop Staff Writers - 01-08-2018

Mac Tools offers a variety of pliers sets including: 5-PC. Next Generation Pliers Set (FPS5) Patented rack and pinion design encourages slot engagement and reduces blocking points Large...

Break Loose Frozen Bolts with Mac Tools .401" Shank Long and Short Barrel Air Hammers

by TechShop Staff Writers - 12-05-2017

Mac Tools’ .401” Shank Long and Short Barrel Air Hammers are for use in separating ball joints and tie-rod ends, breaking loose frozen bolts, removing bushings in control arms, cutting applica...

Store Tools Right Where You Need Them with Mac Tools Utility Carts

by TechShop Staff Writers - 11-29-2017

The MB198UC / MB198UCCOMBO Utility Carts from Mac Tools feature a sliding top lid with stainless steel top surfaces and a rear grommet for power access. The carts are available in three-drawer (MB1...

Mac Tools New Macsimizer Workstation for Efficient Tool Storage

by TechShop Staff Writers - 07-17-2017

The new Mac Tools mid-size MB5930 Macsimizer Workstation features the benefits of the company’s 30” depth unit, while its 59” width is more conducive to some work spaces. Two extra-wide t...

Mac Tools Introduces New Cordless Brushless Impact Wrench and Impact Driver

by TechShop Staff Writers - 06-05-2017

As part of the 2017 Mac Tools Tool Fair, Mac Tools announces the launch of its new 20V MAX* ¼” Brushless Impact Driver (MCF886) and 20V MAX* ⅜” Brushless Impact Wrench (MCF891). These new tools...

Mac Tools Offers R134a Semi-Auto A/C Service

by TechShop Staff Writers - 05-02-2017

Recover, vacuum and charge A/C systems with the Mac Tools ACR220M R134A Semi-Auto A/C Service Machine. Its longer 12’ hoses allow more versatility when raising vehicles and working on large truck...

Mac Tools Introduces Pro Eye Light

by TechShop Staff Writers - 05-01-2017

The Pro Eye Light (SPL1500M) from Mac Tools is an exclusive design rechargeable area light. It features three power settings: low/medium/high, offering 500/1000/1500 lumens. It features a ru...

Mac Tools New Tool Storage Selections

by TechShop Staff Writers - 04-13-2017

At the recent 2017 Mac Tools Tool Fair, the company introduced new tool storage options. The MB1004-STEALTH 10-Drawer Workstation features 5” and 3” Xtra-Wide top drawers for convenient acc...

Mac Tools Announces New Reversible Ratcheting Wrench Sets

by TechShop Staff Writers - 04-03-2017

  Mac Tools offers two 12-piece Ratcheting Wrench Sets – one SAE (SRWO212PTB) and one metric (SRWMO212PTB), as well as a six-piece Metric Large Reverse Ratchet Wrench Set (SRWMO26PT). ...

Mac Tools’ MDT 10 Diagnostic Tools Delivers Enhanced Performance Boost for Techs

by TechShop Staff Writers - 01-03-2017

The Mac Tools MDT 10 is an ergonomically designed vehicle diagnostic tool built specifically for technicians. The MDT 10 features best-in-class coverage for more than 25,000 vehicle systems, and ca...

Mac Tools Offers Hi Vis Combination Screwdriver Set

by TechShop Staff Writers - 06-01-2016

The six-piece Mac-Grip Combination Screwdriver Set from Mac Tools features a 360° ergonomic textured grip for maximum comfort. The tools feature “tip ID” for easy recognition of tip type when ...

Mac Tools Cordless Tools Let You Break Free

by TechShop Staff Writers - 01-22-2016

Built from glass-filled nylon and other quality materials, Mac Tools’ cordless tools, including impact wrenches, ratchets and drills, are built to withstand harsh automotive fluids in a shop en...

Mac Tools Delivers Next Generation Of Die Grinders

by TechShop Staff Writers - 12-16-2015

Mac Tools introduces the next generation of pneumatic die grinders. The Die Grinder line was designed for the professional automotive technician with a powerful design that provides optimal comfor...

Make A Big Impact With Mac Tools New 1" Impact Tools

by TechShop Staff Writers - 10-28-2015

Mac Tools presents new 1" impact tools that are available in inline and pistol configurations. The new impact tools provide excellent power, while also being lightweight for less fatigue when working ...

Raise Awareness With Mac Tools New Breast Cancer Awareness Tool Box

by TechShop Staff Writers - 10-06-2015

Mac Tools presents the MB1000A-BCA 2015 Breast Cancer Awareness Tool Box. Mac Tools is a proud supporter of The Stefanie Spielman Fund for Breast Cancer Research and the Breast Cancer Society of Canad...

Mac Tools Offers 3 New Cordless Impacts

by TechShop Staff Writers - 09-04-2015

Mac Tools presents three new and innovative cordless impacts that are available in several variations to meet a technician’s impact tool needs. The new impacts offer reliable power, comfort for more...

Get Full Access with Mac Tools’ Line of Axis Ratchets

by TechShop Staff Writers - 07-29-2015

Mac Tools presents a line of Axis ratchets designed to allow full access for every user. The new line features a compact pear head design and a 4° arc swing that provides users ultimate access in eve...

Mac Tools Torque Sockets Remove Fasteners Rounded Up to 85%

by TechShop Staff Writers - 06-18-2015

Precision Torque performance from Mac Tools has been expanded to include a line of hand and impact sockets that won’t slip on fasteners rounded up to 85%. The unique inner geometry of the 6-p...

Mac Tools' Mentor Touch Scout Provides Diagnostics at Your Fingertips

by TechShop Staff Writers - 03-09-2015

Mac Tools’ Mentor Touch Scout is a professional scan tool built into a durable Android tablet with a 7” capacitive, high-resolution touch-screen display. It offers full access to Google Play an...

Mac Tools Is Wrenching for a Cure

by TechShop Staff Writers - 10-22-2014

In support of Breast Cancer Awareness month, Mac Tools is featuring a variety of Wrenching For A Cure products available for purchase in the Flyer 11 through Nov. 2. Featured pink products include clo...

Break Free With the Mac Tools Line of Cordless Tools

by TechShop Staff Writers - 08-13-2014

Mac Tools’ cordless tools includes impact wrenches, ratchets and drills that are designed and built tough for automotive technicians. Built from glass-filled nylon (GFN) and other quality materials,...

Illuminate Your Work Space with Lights from Mac Tools

by TechShop Staff Writers - 07-23-2014

Mac Tools presents a new line of corded shop lights for professional technicians that feature a higher wattage of light output to illuminate the work area brighter than normal work lights. Availabl...

Recent News

Mac Tools Ranks in the Top 10 Fastest Growing Franchises

by TechShop Staff Writers - 03-09-2018

Entrepreneur magazine has ranked Mac Tools the No. 8 Fastest-Growing Franchise, nationwide, for 2018. Over 1,000 companies applied for the 39th annual Franchise 500 ranking, making this year th...

Mac Tools Welcomes New President Ken Hartman

by TechShop Staff Writers - 12-19-2017

Mac Tools has announced Ken Hartman as president, Mac Tools, North America. Hartman and his leadership team will advance Mac Tools’ focus on innovation and Made in the USA with Global Materia...

Mac Tools Named Top New Franchise In 2015 By Entreprenuer.com

by TechShop Staff Writers - 12-09-2015

Mac Tools, an international company with distributors and franchisees in the United States, Europe, Canada and Japan, has been named the No. 1 Top New Franchise for the second straight year by Entrepr...

Race For The Cure - Mac Tools New Breast Cancer Awareness Dragster

by TechShop Staff Writers - 10-05-2015

Mac Tools unveils the newly wrapped Mac Tools Top Fuel Dragster to bring awareness to Breast Cancer. Top Fuel driver, Doug Kalitta and crew will be wearing matching Breast Cancer Awareness crew shirts...

Mac Tools Donates to Breast Cancer Research Fund through Sales of ‘Wrenching for a Cure’ Products

by TechShop Staff Writers - 04-28-2015

Mac Tools has made donations of more than $30,000 to The Stefanie Spielman Fund for Breast Cancer Research and over $4,000 to The Breast Cancer Society of Canada. Mac Tools would like to thank ...

Videos


Matco Tools

4403 Allen Road
Stow OH 44224
US
Phone: 800-331-2427Fax: 330-926-5332
Categories: A/C, A/C & Cooling System Tools & Equipment, Accessories, Air Tanks, Air Tools, Alignment Racks, Basic Mechanic Tools, Battery Chargers, Body Shop Equipment, Brake Service Equipment, Chemicals, Collision Industry Segment, Compressors, Cordless Tools, Creepers, Diagnostic Testing Equipment & Tools / Scan Tools, Electric Tools, Electrical System Test Equipment, Engine & Fuel System, Hand Tools, Induction Heaters, Jacks & Hydraulics, Leak Detection, Lifts, Lube & Fluid Equipment, Machines -- Other, Paint & Body Shop Tools, Parts Cleaners, Power Tools and Accessories, Pressure Washers, Reels & Accessories, Repair Information & Training, Shop Climate (Heaters, Fans, Etc.), Shop Equipment, Shop Safety/Personal Protection, Shop Supplies, Shop Supplies & Other Products, Specialty Tools, Surface Prep, Tool & Shop Storage, TPMS / Tire / Wheel Service Equipment & Tools, Transmission & Powertrain System, Vehicle Appearance, Vehicle System Tools & Equipment, Welding, Work Lights / Flashlights

Recent Products

Matco Tools Maximizes Diagnostics with MDMAX3 Scan Tool

by TechShop Staff Writers - 09-25-2018

Matco Tools Maximus 3.0 Diagnostic Scan Tool, No. MDMAX3, is the fastest and strongest member of the Maximus family. Once you scan a vehicle, you can equip yourself with the information needed ...

Matco Hose Clamp Pliers Adjust to 15 Positions

by TechShop Staff Writers - 05-07-2018

A best seller for Matco Tools is the 7” Hose Clamp Pliers (PHC7). The hose clamp pliers feature a push-button adjustment with 15 adjustment positions. The reliable grip of the pliers in all posi...

Matco's Rechargeable Dual Switch Flashlight Provides Maximum Illumination

by TechShop Staff Writers - 05-01-2018

The Matco Tools Strion Flashlight Dual Switch High Lumen with Piggyback Charger, no. M95278, provides maximum illumination and a wide beam for maximum visibility. It features a push-button tail sw...

Matco Tools 81 Piece Auto Master Tap & Die Set

by TechShop Staff Writers - 05-01-2018

The Matco Tools 81-Piece Auto Master Tap & Die Set (81MATDS) is a comprehensive, lifetime warranty set designed uniquely for technicians and includes automotive-specific sizes not found in tradi...

Solve OBD II Powertrain Issues with Matco Tools' Fix Advisor Pro

by TechShop Staff Writers - 03-28-2018

  The Matco Tools Fix Advisor Pro, No. MD100, is the company’s latest generation of OBD II powertrain issue solvers for all levels of technicians. The device features a 3.5” color d...

Matco Tools Offers Powerful Code Reader

by TechShop Staff Writers - 03-14-2018

  The Matco Tools MD60A CodeAdvisor has all the basic features a technician needs to diagnose check engine lights on 1996 and newer OBD II vehicles. Features like DTC severity, on-scree...

Bolt On Technology Now Integrates with Matco Tools' Maximus Scan Tool

by TechShop Staff Writers - 02-26-2018

Bolt On announced its integration with the Matco Maximus Tablet at the 2018 Matco Tools National Business Conference. The integration includes the new Matco Maximus 2.0A, MAXGO-A and MAXME-A Tabl...

3/8" Drive Flex Head Electronic Torque Wrench from Matco Tools

by TechShop Staff Writers - 02-05-2018

  The Matco Tools 3/8" Drive Flex Head Electronic Torque Wrench (ETWB100FKA) offers a sealed ratchet head for better performance and its flex head design provides added access and control ...

Matco Tools Offers New Color Options in Popular 1/2” Impact Wrench

by TechShop Staff Writers - 11-27-2017

The Matco Tools 1/2” Composite Pneumatic Impact Wrench MT2769 is now available in green (MT2769G) and orange (MT2769O), featuring the same 1,300 ft.-lbs. of breakaway torque and backed up with a...

Matco Tools 12-Piece Hand Impact Driver Set

by TechShop Staff Writers - 11-13-2017

The Matco Tools 12-Piece Hand Impact Set (SID12PB) features a reversible 3/8" square drive impact driver with a heavy-duty hexagon grip, which prevents the impact driver from slipping out of your hand...

Matco 3/8" Drive Metric Extended Anvil Universal Chrome Socket Set Available

by TechShop Staff Writers - 10-11-2017

The Matco Tools 3/8" Drive 12-Piece Metric Extended Anvil Universal Chrome Socket Set (SBLSP122M) features anvil sockets that fit multiple configurations, including 6- and 12-point, torx, torx plu...

Matco Offers 3/8" Locking Flex Ratchet Featuring 88 Ratchet Gear Teeth

by TechShop Staff Writers - 09-12-2017

The Matco Tools 3/8" Drive 15" eighty8 Tooth Locking Flex Ratchet — available in green and orange, No. BFR158LFGA and No. BFR158LFMA — features 88 ratchet gear teeth that produces a swing arc just...

Matco 12V Cordless Infinium Impact Driver Kit Gets You into Tight Spots

by TechShop Staff Writers - 08-08-2017

  The compact 12V Cordless Infinium Impact Driver Kit (MCL1214IDK) from Matco Tools is great for interior work, where size of the tool is important. The unit provides up to 60 ft.-lbs. ...

Matco Power Steering Pulley Set for Domestic Vehicles

by TechShop Staff Writers - 07-19-2017

The Matco Tools Master Power Steering Pulley Set (PSPS477) was designed to remove and install press-on type, belt-driven accessory pulleys found on most major domestic vehicle platforms. For us...

Reset a TPMS in Less than Two Minutes with Matco Tools MAXTPMS and OBD II Module

by TechShop Staff Writers - 06-27-2017

The Matco Tools OBD II Module for MAXTPMS (MDMAXTPMSOBD), pairs with the MDMAXTPMS to enable re-learn procedures through the OBD II port. This unit was designed to bypass many of the manual res...

Protect Your Tools with Matco's Customizable Toolbox Drawer Organization Kits

by TechShop Staff Writers - 05-31-2017

Matco Tools’ exclusive toolbox drawer organization kits are a completely customizable solution that are engineered to maximize efficiencies and profitability for today’s technician. With thousa...

Matco Tools Provides Modular Lighting Solution

by TechShop Staff Writers - 10-25-2016

The MATCO Fast Connecting Light Kit (P/N MFCLK) is a revolutionary modular lighting solution that provides all the lighting a technician needs in one kit, says the company. A patent-pending qui...

Matco Tools to Offer Adenna Disposable Gloves

by TechShop Staff Writers - 08-23-2016

Adenna Inc. announces the recent signing of an agreement with Matco Tools. This agreement covers the distribution of Adenna’s synthetic and latex disposable gloves to automotive professionals an...

Matco's maxME Scan Tool Provides Complete Coverage, One-Click Updates

by TechShop Staff Writers - 06-15-2015

The maxME bi-directional scan tool from Matco Tools features a patented, pay-as-you-go software subscription service, allowing users to pay for only the car makes they work on. Using the MAX app, u...

Matco Tools Lights Feature New Energy-Saving Technology

by TechShop Staff Writers - 03-09-2015

Matco Tools’ Lighting Program includes SMD (Surface Mounted Diodes) and COB (Chip on Board) technology lighting, greatly enhancing the quality of light. These light configurations greatly reduce ...

Jump Start Your Power with Matco's MTJS12PRO

by TechShop Staff Writers - 02-25-2015

The Matco Tools MTJS12PRO 12V-22AH Jump Starter Pro is a heavy-duty professional jump starter with a fully automatic 4 Ah charger for a fast charge. It features a modern LCD voltmeter display and 2...

Matco Tools Versapower: Power Source and Jump Starter

by TechShop Staff Writers - 12-16-2014

Featuring 300 cranking amps with 400 peak amps of power, the Matco Tools Versapower (MINIJUMP) can be used to jumpstart most domestic and import vehicle make and models, including cars, light truc...

Matco Tools Announces New Cordless Half-inch Impact Wrench

by TechShop Staff Writers - 11-26-2014

Matco Tools recently announced the release of a new 18V cordless Infinium half-inch impact wrench and kit to its growing product line. The MCL1812IWK is one of the latest offerings from Matco, featuri...

Matco Tools Adds JSC450 and JSC480 to Line of Service Carts

by TechShop Staff Writers - 11-17-2014

Matco Tools has added two new model options. The recently developed JSC450 and JSC480 toolboxes offer autoworkers quality, value-priced mobile tool storage that is built at Matco’s plant in Jame...

Matco Offers Techs Safety and Style in Carhartt Glasses

by TechShop Staff Writers - 07-21-2014

Stay safe with Matco Tools’ wide variety of safety glasses, including Carhartt branded glasses ranging in style and functionality. The basic Carhartt Billings Safety Glasses (CH110ST) are a great...

Matco Tools Expands Diagnostic Family With Two New Products

by TechShop Staff Writers - 02-11-2014

As part of Matco Tools’ mission to continue providing the most innovative tools on the market, the company announced at its distributor expo that it will be expanding its growing line of diagnosti...

Matco Tools Introduces Maximus, The Future Of Diagnostic Tablets

by TechShop Staff Writers - 02-28-2013

Matco Tools’ new Maximus provides the automotive industry with a unique solutions-based diagnostics and information tablet. Matco recently added the Maximus diagnostic tablet to its product lineu...

Matco Tools Introduces the MPS700 OBD II & ABD Scan Tool

by TechShop Staff Writers - 06-10-2010

Matco Tools introduces a new OBD II & ABD Scan Tool, the MPS700. This tool features: • New advanced scan tool with Code Connect data — Code Connect provides the top reported fixes for the ...

Recent News

BOLT ON TECHNOLOGY Launches Photo Contest to Celebrate Milestone

by TechShop Staff Writers - 10-11-2018

BOLT ON TECHNOLOGY, in partnership with Matco Tools, announced the launch of the “What’s a Photo Worth” contest, commemorating the 20 millionth repair photo to be uploaded via BOLT ON’s so...

Matco Tools Celebrates Tools for the Cause

by TechShop Staff Writers - 05-02-2018

Matco Tools proudly supports military and veterans’ families with its Tools for the Cause program where 15 percent of the proceeds from the sale of Tools for the Cause products and merchandise w...

Matco Tools Ranked a Top Franchise in Entrepreneur's 39th Annual Franchise 500

by TechShop Staff Writers - 01-18-2018

Matco Tools recently ranked in Entrepreneur magazine's Franchise 500. Placement in the Franchise 500 is a highly sought-after honor in the franchise industry, as evidenced by the fact that Entrepreneu...

Matco Tools Celebrates Tools for the Cause with Exclusive Products

by TechShop Staff Writers - 10-18-2017

Matco Tools proudly supports breast cancer research with its Tools for the Cause program. Go pink this October in support of breast cancer research. Fifteen percent of the proceeds from the sal...

Time to Go Pink! Matco Tools Celebrates Tools for the Cause

by TechShop Staff Writers - 10-02-2017

Matco Tools proudly supports breast cancer research with its Tools for the Cause program. Go pink this October in support of breast cancer research. Fifteen percent of the proceeds from the sale of 3...

Texas Tornado Is No Match for Matco Tools Toolbox

by TechShop Staff Writers - 06-20-2017

A tornado struck Van Zandt County, TX, April 29, and tragically, four people died from injuries sustained during the storm. Severely hit was the I20 Chrysler Dodge Jeep Ram dealership on Interstate...

Matco Tools Continues 'Tools For The Cause' Campaign With Launch Of 'I Drive For' Breast Cancer Awareness Program

by TechShop Staff Writers - 08-26-2014

Don Schumacher Racing’s Matco Tools Top Fuel Dragster team and Antron Brown will once again race to raise awareness and funds for a cause that affects everyone — breast cancer. To-date, Matco T...

Videos


Rotary Lift

2700 Lanier Drive
Madison IN 47250
US
Phone: 800-640-5438Fax: 800-578-5438
Categories: Alignment Racks, Jacks & Hydraulics, Lifts, Shop Equipment

Recent Products

Rotary Lift Features Leverless Tire Changer in New Video

by TechShop Staff Writers - 08-23-2018

The Rotary Lift R1150 is a no-lever action, hub mounting tire changer that offers a safe and efficient way to change a large variety of difficult tires and wheels. This tire machine can handle the...

Rotary Introduces Tower-Free Wheel Aligners

by TechShop Staff Writers - 01-03-2018

Rotary introduced a full line of wheel alignment equipment at the SEMA Show that's fast, accurate and easy to operate, plus has no minimum bay size requirements and can be used anywhere in the shop....

Rotary Wheel Balancers for Shops of All Sizes

by TechShop Staff Writers - 12-21-2017

Rotary introduces a full line of professional wheel balancers from a value-priced manual model to a sophisticated 3D electronic wheel balancer with microprocessor. The R180 Pro 3D Auto is equip...

Easily Align Most Cars and Trucks on New Rotary XA14 Alignment Scissor Lift

by TechShop Staff Writers - 11-06-2017

    The new Rotary XA14 alignment scissor lift can handle four-wheel alignments on the broadest range of vehicles in its class, from subcompacts to work trucks. “If it wil...

Rotary Lift’s Remote-Controlled Mobile Column Lift Lineup Expanded

by TechShop Staff Writers - 05-16-2017

  Rotary Lift has expanded its Mach Flex powered by RedFire remote-controlled mobile column lift line-up to include the MCHF13 FLEX. This smaller Mach Flex lift provides 13,000 lbs. capaci...

Lift Trucks and Vans Fast with Rotary Lift's Medium-Duty Lift

by TechShop Staff Writers - 12-20-2016

  Rotary Lift’s patented Shockwave technology is now available on the 12,000-lb. capacity SmartLift inground lift, making it possible to service pick-ups, work trucks and vans twice as f...

Rotary Lift Launches New Low-Profile Double-Section Scissor Lift

by TechShop Staff Writers - 05-18-2016

    The new space-saving Rotary Lift RLP77 Double-Section Scissor Lift offers several innovative productivity features that make it a reliable and economical choice for quick-servi...

Improve Ergonomics and Boost Productivity With Rotary Lift's Tire Hanger

by TechShop Staff Writers - 11-19-2015

Rotary Lift’s productivity-enhancing car lift accessory makes it easier for technicians to remove wheels for tire rotations and brake and suspension work. The Wheel Wing tire hanger attaches to a...

Stabilize Vehicles When Removing Heavy Components With New Light-Duty Jack Stands From Rotary Lift

by TechShop Staff Writers - 02-24-2015

Rotary Lift introduces a lightweight, easy-to-use jack stand designed to stabilize vehicles loaded on two-post surface and inground lifts. The new RS4 supplementary tripod jack stand features 4,00...

Improve Ergonomics And Boost Shop Productivity With Rotary Lift Wheel Wing Tire Hanger

by TechShop Staff Writers - 11-11-2014

Rotary Lift’s latest productivity-enhancing car lift accessory makes it easier for technicians to remove wheels for tire rotations and brake and suspension work. Introduced at last week’s SEMA...

Boost Productivity In Small Spaces With New Rotary Lift ATO7 Two-Post Lift

by TechShop Staff Writers - 10-09-2014

Rotary Lift’s new space-saving ATO7 7,000-lb. capacity two-post lift helps shop owners get more productivity out of tight spaces. The lift features an overall width of just 10 feet, 3 inches – 14....

Rotary Lift Updates Light-Duty Four-Post Lifts For Better Productivity And Durability

by TechShop Staff Writers - 09-30-2014

Rotary Lift has updated its SM series of 14,000-lb. capacity four-post lifts to provide greater productivity and durability through a higher rise height, improved drive-on ramps and a new powder-coate...

Recent News

New Rotary Video Teaches Inground Lift Inspection and Maintenance Procedures

by TechShop Staff Writers - 02-21-2018

Spending a few minutes every day inspecting your inground lifts can lead to greater shop efficiency, increased revenue and less downtime. The latest Rotary Lift "90 Second Know How" video, "Inground...

Rotary Lift Earns U.S. Patent for Y-Lift Vertical Rise Platform Lift

by TechShop Staff Writers - 06-06-2016

Rotary Lift has received United States patent number 9254990 B2 covering two major aspects of the design of its award-winning Y-Lift vertical rise platform lift. These design features maximize ris...

Rotary Lift Provides Tips For Choosing The Best Vehicle Lift Battery

by TechShop Staff Writers - 10-28-2015

Battery-operated vehicle lifts are fast and convenient. Their DC power units drive quick rise times, and battery-powered mobile column lifts provide heavy-duty technicians with complete portability. A...

Top 10 Vehicle Lift Safety Tips From Rotary Lift

by TechShop Staff Writers - 10-12-2015

Since no piece of vehicle service equipment is used on a daily basis more frequently than a vehicle lift, proper lift safety practices are crucial. That’s why Rotary Lift has put together a list...

Rotary Lift Named 2014 Equipment Vendor Of The Year By KOI Auto Parts

by TechShop Staff Writers - 02-17-2015

KOI Auto Parts, a leading automotive parts provider in Kentucky, Ohio, Indiana and West Virginia, has named Rotary Lift its 2014 Equipment Vendor of the Year. The annual award recognizes a manufac...

Videos