Connect with us

Buyer’s Guide

Need to update your Buyers Guide Listings?

Click Here

Not Listed? Add your company information.

Click Here

Ken-Tool

Phone: 330-535-7177Fax: 330-535-1345 768 E. North Street, Akron OH 44305,

Recent Products

Now In Stock from Ken-Tool: MEGA AirBlast Bead Seaters

by TechShop Staff Writers - 12-03-2019

Ken-Tool is pleased to announce that new MEGA AirBlast Bead Seaters are now in stock.  The Ken-Tool MEGA AirBlast bead seating tool uses compressed air to properly seat the bead on auto, ATV ...

Ken-Tool Announces New Stow & Go 4-way HD Lug Nut Wrench

by TechShop Staff Writers - 08-21-2018

Ken-Tool introduced a very significant improvement to the tried-and-true four-way lug nut wrench with the new 35636 Stow & Go heavy-duty wrench. The Ken-Tool Stow & Go offers user conve...

Ken-Tool HexChex Loose Wheel Nut Indicators Fit Up to 10-sided Lug Nuts

by TechShop Staff Writers - 08-15-2018

Ken-Tool announced the availability of the HexChex Multi-Size loose wheel nut indicators. The Ken-Tool HexChex Multi-Size loose wheel nut indicators offer very wide application coverage in only...

Ken-Tool Rust Hog Hub Abrasive Driver Tool Quickly Removes Surface Rust From Wheels, Hubs, Studs

by TechShop Staff Writers - 04-03-2017

  Ken-Tool announces the new Rust Hog abrasive tool (30167) for the removal of surface rust and debris on studs and flat mating surfaces of wheels, wheel hubs and brake rotor hats. The ...

Ken-Tool Offers New 5-piece MorTorq Socket Tool Set

by TechShop Staff Writers - 12-04-2015

Ken-Tool’s latest fastener socket driver set’s design, often referred to as a “Spiral Drive,” with the driver engaging into the four curved “wings” in the faster head, allows the drive...

Ken-Tool's 8-in-1 Wrench Has Hundreds of Uses

by TechShop Staff Writers - 09-10-2015

Ken-Tool has unveiled the unique, patented 8-in-1 Wrench, in SAE or Metric versions. Designed by a professional auto technician, this wrench delivers strength, versatility and convenience in a 7-1/...

Ken-Tool Introduces ValveCapperPRO

by TechShop Staff Writers - 03-12-2015

Ken-Tool announces the release of its ValveCapperPRO (P/N 29999). The ValveCapperPro is four tools in one; a valve cap remover and installer as well as a valve core remover and installer. The valve co...

Ken-Tool Introduces T38B Metric Valve Breaker

by TechShop Staff Writers - 02-19-2015

Ken-Tool has released its T38B Metric Valve Breaker (P/N 35938), which is designed to remove valve stems quickly from smaller 10mm valve stem holes, which are common on heavy-duty aluminum and alloy w...

Ken-Tool 35359 H.D. Universal Wheel Weight Hammer

by TechShop Staff Writers - 12-16-2014

Ken-Tool has released its Heavy Duty Universal Wheel Weight Hammer (P/N 35359). The new hammer is designed for installing and removing clip-on wheel weights for light- to heavy-duty trucks. The ham...

Ken-Tool Introduces the 35361 Automotive Weight Hammer

by TechShop Staff Writers - 12-01-2014

Ken-Tool announces the release of its Automotive Wheel Weight Hammer (P/N 35361). The new hammer is designed for installing and removing clip-on wheel weights for automotive and light-duty trucks....

Ken-Tool Introduces The ValveCapper PRO

by TechShop Staff Writers - 10-27-2014

Ken-Tool, a leading provider of automotive and tire service tools, has released its ValveCapper PRO (Part No. 29999). The ValveCapper PRO is four tools in one – a valve cap remover and installer as ...

Recent News

Ken-Tool Celebrates Important Milestone

by TechShop Staff Writers - 01-15-2015

Ken-Tool, a leading manufacturer of professional tire service hand tools, will be celebrating an important milestone in 2015 – the 95th anniversary of the founding of the company by John A. (Jack) K...

Ken-Tool Announces ISO 9001:2008 Certification

by TechShop Staff Writers - 01-08-2015

On Dec. 9, 2014, Ken-Tool became certified with the current ISO 9001:2008 standards for quality management systems. ISO is the world’s most widely used quality assurance procedural guidelines, an...

Videos


Mohawk Resources, Ltd.

Phone: 800-833-2006Phone: 518-842-1431Fax: 518-842-1289 P.O. Box 110, Amsterdam NY 12010,

Recent Products

Raise Medium-Duty Vehicles with Mohawk 18,000-lb. Capacity Two-Post Lift

by TechShop Staff Writers - 08-28-2017

Mohawk’s TP-18 two-post lift is a clear-floor, above-ground lift capable of raising medium-duty vehicles up to 18,000 lbs. This is a two-post, medium- to heavy-duty lift that handles the wide...

Mohawk Offers 12,000-Lb. Low-Ceiling Two-Post Lift

by TechShop Staff Writers - 01-25-2017

Mohawk’s LC-12 is a low-ceiling, clear-floor, above-ground lift capable of raising light- and medium-duty vehicles up to 12,000 lbs. Two 4” heavy-duty cylinders make for safer, steadier lifti...

Service Turf Equipment with Mohawk Lifts Dual Trough Accessory

by TechShop Staff Writers - 12-07-2016

Mohawk Lifts has released a new accessory to service cars, trucks, zero turn mowers, turf equipment and four wheelers. The turf kit with dual trough has a 6,000-lb. capacity and can be used on ...

Doing Transmission Work? Mohawk Lifts Helps with 2,000-lb. Capacity Scissor Lifting Table

by TechShop Staff Writers - 07-20-2016

  Mohawk’s SLT-2000 is a 2,000-lb. capacity scissor lifting table made to remove or install large transmissions, rear ends or differentials. The SLT platform is 4′ long by 2′ wide...

Mohawk Helps You Turn A Two-Post Lift Into A Quick Drive-On Lift

by TechShop Staff Writers - 11-13-2015

Mohawk Lifts’ SPEEDLANE is a drive-on adaptor for a two-post lift to quickly convert the frame-engaging swing arm lift into a drive-on pad lift to leave the wheels hanging free for tire, brake and u...

Mohawk Offers Complete Lift Installation in 5 Hours

by TechShop Staff Writers - 09-24-2014

  Mohawk Resources Ltd. offers the 18,000-lb. capacity model TP-18 and the 26,000-lb. capacity model TP-26. These two-post, frame contact lifts are made to suit the needs of heavy-duty ...

Mohawk Lifts’ USL-6000 Is a Space-Saving Scissor Lift

by TechShop Staff Writers - 08-12-2014

Mohawk Lifts’ USL-6000 universal scissors lift is a 6,000-lb. capacity full-rise, no-post, portable lift, giving shops full side and under-vehicle access. The USL-6000 features all the benefits o...

Recent News

Videos


National Electric USA

Recent Products

Recent News

Videos


Nu-Tec Systems

Phone: 704-935-3900Fax: 980-500-1020 302 Rolling Hill Road, Mooresville NC 28117,

Recent Products

Recent News

Videos


Redline Detection

Phone: 714-451-1411Fax: 714-579-6967 828 W. Taft Ave, Orange CA 92865,

Recent Products

Redline Detection Unveils ReadySmoke Diagnostic Leak Detector

by TechShop Staff Writers - 04-16-2018

Redline Detection has unveiled its newest product, ReadySmoke, a compact, cost-competitive smoke machine that is made in America. A smoke machine allows technicians to quickly detect, locate ...

Redline Detection Offers High Pressure Automotive Diagnostic Leak Detection

by TechShop Staff Writers - 01-31-2018

Every technician has replaced a turbo or other costly components only to find that it wasn't the problem. When it comes to turbo, diesel, any type of boosted engine, until now it's been impossible ...

Quickly Find Wind and Water Leaks with Body Pro from Redline Detection

by TechShop Staff Writers - 06-27-2017

The Body Pro from Redline Detection is the solution to quickly solve time-consuming, difficult-to-diagnose, wind and water leaks that are a drain on profitability for body collision repair technicians...

Locate Leaks with Redline Detection’s Dual Purpose Diagnostic Leak Locator

by TechShop Staff Writers - 05-02-2017

With the Dual Purpose Diagnostic Leak Locator from Redline Detection, technicians have the ability to do all types of diagnostic leak detection with a single machine: both low pressure for traditional...

Redline Detection Unveils Air Brake Nanoleak Finder

by TechShop Staff Writers - 03-15-2017

Redline Detection has unveiled the Air Brake NanoLeak Finder, a technological innovation that quickly pinpoints leaks in air brake, air suspension and air powered accessory systems. “The Air ...

Redline Detection Introduces SmartFit Universal Cooling System Test Kit

by TechShop Staff Writers - 03-08-2017

SmartFit promises to be the last radiator adaptor you will ever buy, says Redline Detection. With SmartFit, technicians have a single test kit that expands to fit 100% passenger vehicles and l...

Smoke Pro Master Tech Pack from Redline Detection Finds Leaks

by TechShop Staff Writers - 07-13-2016

The Smoke Pro Master Tech Pack is a comprehensive diagnostic leak solution for your shop. This pack includes Redline Detection’s best-selling Smoke Pro Total-Tech along with all of the accessorie...

Redline Detection Unveils Dual Purpose Diagnostic Leak Locator

by TechShop Staff Writers - 06-08-2016

Redline Detection recently unveiled the new Dual Purpose Diagnostic Leak Locator, offering a full, variable range of low- to high-pressure testing. Applications include both low-pressure leak test...

Redline Detection Offers High Pressure Automotive Diagnostic Leak Detection

by TechShop Staff Writers - 04-18-2016

Every technician has replaced a turbo or other costly components only to find that it wasn't the problem. When it comes to turbo, diesel, any type of boosted engine, until now it's been impossible ...

Redline Detection Offers New Power Intake Adaptor Set

by TechShop Staff Writers - 11-24-2015

Redline Detection recently announced the Power Intake Adaptor Set for turbo, diesel, supercharged and high performance engines. An entirely new engineering feat, Power Intake is a pair of inflatabl...

Redline Detection Introduces Body Shop Equipment at NACE | CARS Show in Detroit

by TechShop Staff Writers - 07-29-2015

Redline Detection announced its newest equipment, specifically engineered for collision and body professionals, at the NACE | CARS Show in Detroit. The Body Pro is the solution to quickly solve time-c...

Redline Detection Offers Leak Detector for Turbo and Boosted Engines

by TechShop Staff Writers - 06-24-2015

Redline Detection’s PowerSmoke PRO replicates the full load of a turbo, supercharged or boosted engine so the entire system can be safely tested for faults with the engine off. According to the c...

Redline Detection Unveils New HD PowerSmoke

by TechShop Staff Writers - 01-27-2015

Redline Detection, a provider of OEM-approved automotive diagnostic leak detection equipment, recently unveiled the HD PowerSmoke for heavy-duty trucks, buses, commercial, industrial and agricultural ...

Redline Detection Unveils Redline Tech Academy Training Facility; Expands Headquarters and Manufacturing

by Jennifer Clements - 11-05-2014

At AAPEX today, Redline Detection ­announced its new 3,000-square-foot Redline Tech Academy Training Facility in Orange, Calif. The new training facility is part of the company’s ­expanded global ...

Recent News

Redline Detection Granted UL Product Certification

by TechShop Staff Writers - 05-02-2019

Redline Detection announced that they have been granted approval for the first ever UL Certified diagnostic leak detector, meeting UL’s internationally recognized standards for safety and quality. ...

ISN and Redline Detection Announce Exclusive Partnership

by TechShop Staff Writers - 11-06-2017

Redline Detection announced at AAPEX an exclusive partnership with Integrated Supply Network (ISN). The company’s Air Brake NanoLeak Finder will be available Jan. 1, 2018, exclusively through ISN. ...

Nissan Chooses Redline Detection for Essential Tool and Equipment Program


by TechShop Staff Writers - 11-02-2016

Redline Detection announced today at AAPEX that the company has been chosen by Nissan to provide essential equipment that will be used to service Nissan and Infiniti vehicles at 1,500 locations. ...

Internship Program Expanded at Redline Detection

by TechShop Staff Writers - 05-03-2016

“Every year, we get many times more applicants than we have internship positions available,” Zack Parker, president of Redline Detection, said at the Equipment and Tool Institutes annual Tool Tech...

Redline Detection Sponsors NHRA Dragster

by TechShop Staff Writers - 03-09-2016

Redline Detection has announced that they will be the naming sponsor of a top NHRA Dragster. “We are thrilled to sponsor this incredible car and this fantastic team,” said Alex Parker of Re...

Redline Detection Opens Nominations At AAPEX For Third-Annual Redline Rock Star Performance Award

by TechShop Staff Writers - 10-27-2015

Redline Detection, which makes high-pressure diagnostic leak detection equipment for the global market, announced it will begin accepting nominations for the Redline Rock Star Performance Award at the...

Redline Detection Names 2015 Redline Rock Star Performance Award Winner

by TechShop Staff Writers - 03-25-2015

Redline Detection has announced the winner of its 2015 Redline Rock Star Performance Award. Rob McNees of Truck Centers, Inc. (TCI) was selected by the Redline Technical Advisory Board as the winner ...

Redline Detection Seeks Nominations for 2nd Annual Redline Rock Star Performance Award

by TechShop Staff Writers - 11-25-2014

Redline Detection is encouraging anyone who works with, or knows, a talented technician to nominate him or her for the second annual Redline Rock Star Performance Award. The award recognizes a tec...

Videos


Reelcraft Industries, Inc.

Phone: 800-444-3134Fax: 260-248-2605
Contact: Scott Cassidyhttps://www.reelcraft.com
2842 E Business Hwy 30, Columbia City IN 46725,

Recent Products

Reelcraft Offers Spring Retractable High Capacity Hose Reels

by TechShop Staff Writers - 05-01-2017

  Reelcraft’s new Series G9000 hose reels are designed to be compact and allow for longer lengths of larger diameter hose. The redesigned gooseneck can be removed from the reel for ea...

Reelcraft Offers High Operating Temperature Hose Reels

by TechShop Staff Writers - 02-01-2017

Reelcraft’s new high operating temperature hose reels are supplied with low pressure, rubber hoses for more extreme air temperature applications. All of the reels are rated for air temperatur...

Reelcraft’s Spring Retractable Reels Accommodates Up to 100’ of Cord

by TechShop Staff Writers - 08-08-2016

Reelcraft’s new Series L 70000 cord reels are designed to accommodate up to 100’ of 12-gauge cord. The heavy-duty base design, all-steel construction and a baked-on powder coat finish combine t...

Reelcraft Reel Mounting Assembly for Easy Overhead and I-Beam Mounting

by TechShop Staff Writers - 12-29-2014

Reelcraft Industries offers mounting assemblies for mounting Series 7000 reels to an I-beam or for overhead support. The assembly includes a channel for one or two reels and beam clamps for att...

Recent News

Videos


Shark Industries Ltd.

Phone: 800-537-4275Phone: 763-565-1980Fax: 763-565-1901 6700 Bleck Drive, Rockford MN 55373,

Recent Products

Shark Industries Tack Welder Perfect for Repairing Plastic

by TechShop Staff Writers - 05-31-2018

The Shark Industries Pro-Tack Welder is an eco-friendly welder that is great for repairing virtually anything made of plastic, from car bumpers to wheelbarrows. Unlike most other plastic welders, ...

Shark Industries' Nitrile Gloves Fit for Heavy-Duty Tasks

by TechShop Staff Writers - 05-01-2018

Shark Industries’ Blue Mamba Nitrile Gloves are designed to protect hands from heavy-duty chemicals. The gloves are disposable and are ideal for a range of environments where standard gloves fal...

Recent News

Videos


Tregaskiss

Phone: 519-737-3000Fax: 519-737-2111 2570 N. Talbot Road, Windsor ON N0R 1L0,

Recent Products

Recent News

Videos


Tru-Line Laser Alignment, Inc.

Phone: 800-496-3777Phone: 360-371-0552 8231 Blaine Road, Blaine WA 98230,

Recent Products

Recent News

Videos


31 Inc.

31 Inc. logo
Phone: 740-498-8324Fax: 740-498-8325 100 Enterprise Dr., Newcomerstown OH 43832, USA

Recent Products

Recent News

Videos


Alert Stamping & Mfg. Co.

Alert Stamping logo
Phone: 440-232-5020Fax: 440-232-8417
Contact: Ralph Technow http://www.alertstamping.com
24500 Solon Road, Bedford Heights OH 44146, USA

Recent Products

Alert Stamping Offers Weatherproof Reels

by TechShop Staff Writers - 01-08-2020

Alert Stamping releases Weatherproof Reels, suitable for indoor and outdoor use. These NEMA 3R-rated reels bring electricity to vehicles for engine block heaters, on-board rechargeable/power outlets ...

Alert Stamping Offers Rechargeable Battery Pack Auto Hood Light

by TechShop Staff Writers - 09-27-2017

  Alert Stamping offers the ProLite Professional LED Rechargeable Auto Hood Light. The light features 40 cool, energy-efficient LEDs with dual brightness, up to five hours of run time and ...

Alert Stamping Offers Tilt-and-Twist Battery-Operated Task Light

by TechShop Staff Writers - 05-09-2017

  The KTB14S Tilt-and-Twist Battery-Operated Task Light from Alert Stamping features 14 SMD LEDs that produce 150 Lumens. The light’s head tilts 90° and rotates 360°. It features a...

Alert Stamping's 8W COB Light Features a 50’ Cord

by TechShop Staff Writers - 12-13-2016

The 5050CL8 900 Lumen, 8W COB Light Reel from Alert Stamping features a 50’ 18/2 SJT cord, an integrated magnet and folding swivel hook. Soft comfort hand grips and a power “On” indicator...

Alert Stamping Offers Camouflage Pocket Light

by TechShop Staff Writers - 07-06-2015

The 6 LED 60 Lumen Pocket Light (KTB6C) from Alert Stamping features a camouflage appearance, a pocket clip and a magnetic base. It operates on three AAA batteries, which are included. The KTB6c...

Alert Stamping Introduces Versatile Rechargeable Hood Light

by TechShop Staff Writers - 07-01-2015

Alert Stamping’s new rechargeable SMD LED Hood Light offers dual brightness levels: 1,200 lumens on high and 700 lumens on low. Its bracket extends up to 88" and can stand on flat surfaces. The b...

20 Watt COB LED Rechargeable Floodlight with Tripod from Alert Stamping

by TechShop Staff Writers - 12-29-2014

Alert Stamping introduces its 20-watt rechargeable COB LED floodlight with tripod (LFR20T), which offers 1250 Lumen 4800K, two brightness levels and a 6600 mAh Li-ion battery. A compact size for ti...

Recent News

Videos


Bartec USA

Phone: 855-877-9732
Contact: Scot Hollowayhttp://bartecusa.com
44231 Phoenix Drive, Sterling Heights MI 48314, USA

Recent Products

Bartec Offers Programmable TPMS Sensor

by TechShop Staff Writers - 01-17-2020

RITE-SENSOR (P/N RS-1000) is Bartec’s newest programmable TPMS replacement sensor. A single part, multi-frequency solution, RITE-SENSOR covers more than 97% of vehicles on the road and comes with t...

RITE-SENSOR Launch in Full Swing

by TechShop Staff Writers - 10-10-2019

RITE-SENSOR is Bartec’s programmable, single part, multi-frequency, replacement TPMS sensor. According to Bartec CEO Scot Holloway, “Not only does RITE-SENSOR have great coverage, it was desi...

Bartec USA Announces New TPMS Sensor

by TechShop Staff Writers - 09-09-2019

Bartec USA announces their latest product innovation, the RITE-SENSOR. RITE-SENSOR is Bartec’s programmable, single part, multi-frequency replacement TPMS Sensor. According to Bartec CEO Sco...

Bartec USA Announces Latest TPMS Software Update

by TechShop Staff Writers - 10-11-2018

Bartec USA announced the release of their latest TPMS tool software update. Software update 58 is now available for download for your respective Bartec TPMS Tool. “Software update 58 will re...

Bartec Tech200Pro – Where Tire Inspection and Point of Sale Meet

by TechShop Staff Writers - 12-18-2017

    The Bartec Tech200Pro is designed to work with your existing point of sale system or Bartec’s Service Center System, making it an easy, fast and accurate way to inform customers ...

Bartec USA's TPMS Desktop 4.0 Features Remote Tool Setup

by TechShop Staff Writers - 09-18-2017

Bartec USA announces its latest update to the TPMS Desktop, version 4.0, which includes the brand-new feature Remote Tool Setup. Using the newly released Tech200Pro Tire inspection tool, the front...

Latest TPMS Software Update from Bartec USA

by TechShop Staff Writers - 05-02-2017

Bartec USA announces the release of its latest TPMS tool software update. Available to current subscribers at tools.bartecusa.com, Release 56 can now be downloaded to your respective Bartec TPMS to...

Revive Your GDI or Turbo Engine with Bartec's Cleaner

by TechShop Staff Writers - 01-09-2017

Bartec USA announces a new solution to carbon and soot buildup in GDI and turbo diesel engines. Revive Turbo and Engine Cleaner is a non-flammable, non-toxic, water-based solution that is applied th...

Bartec Launches New Quick Service Tool

by TechShop Staff Writers - 11-16-2016

According to Scot Holloway, Bartec USA CEO, “The Bartec Group is growing organically as well as through acquisition, and this year we purchased the aftermarket tools specialists, SP Diagnostics.” ...

Bartec Announces its Newest TPMS Innovation

by TechShop Staff Writers - 10-10-2016

Bartec USA announces the expansion of its range of aftermarket service products. At this year’s SEMA and AAPEX shows, Bartec is announcing the Tech200Pro. The tool integrates TPMS sensor test...

Advanced TPMS Scan Tool Technology with Bartec USA Tech400Pro

by TechShop Staff Writers - 07-21-2016

The Tech400Pro from Bartec works on more cars, is even faster, and offers features and benefits to make your shop more efficient. The Tech400Pro offers wireless TPMS, wireless charging, wireless d...

Bartec Offers Pro Series of TPMS Tools

by TechShop Staff Writers - 01-22-2016

The Pro Series lineup from Bartec USA includes three TPMS tools for repair shops: the 300Pro, 300ProC and 400Pro. The 300Pro is a high-powered activation tool and sensor programming unit that does not...

Bartec Announces Latest Software Update

by TechShop Staff Writers - 07-22-2015

Bartec USA announces the release of its last tool software update. Available to current subscribers to tools.bartecusa.com, Release 53 can now be downloaded to users’ respective Bartec TPMS Tool. ...

Bartec Adds QWIK-SENSOR Coverage

by TechShop Staff Writers - 12-22-2014

Bartec USA has announced the release of the next tool software update for its range of TPMS tools. This latest release features the ability to program the newly released multi-coverage programmable...

Bartec Demonstrates Wireless Tool Updating and Printing

by TechShop Staff Writers - 11-05-2014

Bartec announces wireless updating for the Tech500 TPMS Tool. “With the Tech500 TPMS Tool up to date, you always have the very latest in TPMS vehicle and sensor coverage,” said Bartec CEO Scot Ho...

Huf TPMS 'IntelliSens' Now Supported By Bartec And ATEQ Tools

by TechShop Staff Writers - 03-24-2014

The new “IntelliSens” universal sensor by Huf is now supported by Bartec and ATEQ diagnosis tools. The latest updates run by the tool manufacturers come just in time for tire changing this sprin...

Recent News

Bartec to Demonstrate RITE-SENSOR at SEMA

by TechShop Staff Writers - 10-31-2019

Bartec USA announces their participation in their 14th industry week. Bartec USA will have booths at both shows, AAPEX . Both displays will feature RITE-SENSOR, Bartec’s programmable, single...

Bartec USA Announces Partnership with TCS

by TechShop Staff Writers - 10-29-2018

Bartec USA announced their partnership with TCS, an ARI company. This is the first time Bartec is facilitating an integration from the Tech200Pro with a software provider. TCS (booth 42175) and B...

Bartec USA Announces Industry Week Training and Tool Giveaway

by TechShop Staff Writers - 10-23-2017

Bartec USA is again exhibiting at AAPEX (the company’s 10th year) and is playing a large role in teaching, training and discussing new technology at the show. As a presenter in this year’s new Mob...

Bartec USA Expands Its Loaner Tool Program to Victims of Hurricane Irma

by TechShop Staff Writers - 09-27-2017

  From Bartec USA: The Bartec USA family continues to keep those affected by Hurricane Harvey in our thoughts and prayers. We also extend our thoughts and prayers to all those now affe...

Bartec USA Announces Loaner Tool Program for Customers Affected by Hurricane Harvey

by TechShop Staff Writers - 09-01-2017

From Bartec USA: The Bartec USA family wishes to extend our thoughts and prayers to all those affected by Hurricane Harvey and the subsequent devastation it caused. Bartec USA would like to hel...

Bartec TPMS Software Update Contains 7 OBD Relearns

by TechShop Staff Writers - 07-10-2017

Bartec USA announces the release of their latest TPMS tool software update. Release 56.2 contains seven OBD relearns and is now available for download for each respective Bartec TPMS tool. This...

Bartec Announces Its Latest Software Update for TPMS Tools

by TechShop Staff Writers - 02-03-2017

Bartec USA announces the release of its most recent tool software update. Available to current subscribers at tools.bartecusa.com, Release 55 can now be downloaded to a technician’s respective B...

Bartec Announces Increased Placard Coverage for Tech400Pro

by TechShop Staff Writers - 09-28-2016

Bartec USA announces the addition of 23 vehicles whereby the Tech400Pro and Tech500 can adjust the recommended inflation pressure . Seven of these additions are brand new, never offered before coverag...

Bartec Announces Latest TPMS Software Update

by TechShop Staff Writers - 07-05-2016

  Bartec USA announces the release of its latest tool software update. Available to current subscribers to tools.bartecusa.com, Release 54 can now be downloaded to the respective Bartec TP...

TPMS Trade Up Offered By Bartec

by TechShop Staff Writers - 02-26-2016

Bartec USA announces its TPMS Tool “Trade up” Promotion. Now through June 30, customers can receive more than $800 in add-ons when purchasing a Tech400Pro TPMS Diagnostic Tool. “As we app...

Bartec To Conduct Live Vehicle Demos At SEMA Booth

by TechShop Staff Writers - 10-21-2015

As anyone who attends SEMA knows, when you change the wheel and tire fitment on a car or truck with TPMS, careful consideration must be given to recommended inflation pressure and load capacity. Accor...

New Bartec Tech400Pro TPMS Tool To Be Demonstrated At NACE | CARS

by TechShop Staff Writers - 07-20-2015

Bartec USA, a North American leader in TPMS Diagnostic tools, will hold live demonstrations of its newly released Tech400Pro TPMS Scan Tool at this year’s NACE | CARS show in Detroit. Michael Rose, ...

Bartec Updates Tool Software

by TechShop Staff Writers - 03-03-2015

Bartec USA released its next tool software update for its range of TPMS tools. This latest tool software release integrates TIA’s TPMS Relearn Chart into Bartec’s TMPS software. “The TIA C...

Videos


BendPak, Inc.

BendPak logo
Phone: 805-933-9970Fax: 805-933-9160 1645 E. Lemonwood Drive, Santa Paula CA 93060, USA

Recent Products

Bend-Paks $199 Two-Post Lift

by TechShop Staff Writers - 10-10-2019

Small In Scale, But Not In Awesomeness Your dream of bringing a full-sized BendPak car lift to your desktop, shop or shelf has finally arrived. Introducing the world’s first fully-functio...

BendPak R-134A Recovery, Recycling and Recharging Machine

by TechShop Staff Writers - 07-09-2019

There's nothing easier than programming your A/C settings and walking away to let the machine do its job. The same intuitive thinking that Ranger has brought to more shops worldwide than arguably...

BendPak 12,000-lb. Capacity 2-Post Lift

by TechShop Staff Writers - 06-17-2019

BendPak's XPR-12CL-LTA two-post lift gives you the ability to reach lift points on long wheelbase commercial trucks with its super-long 72-in. maximum arm reach. The three-stage telescoping lift...

BendPak to Showcase New Lift Technology at SEMA

by TechShop Staff Writers - 10-19-2018

BendPak will attend SEMA for four full days of car enthusiast heaven in Las Vegas. BendPak's low-ceiling GrandPrix lift will be on full display, as well as QuickJack and the Autostacker parking lift. ...

Maximum Alignment Convenience with BendPak’s HDS-Series Alignment Lifts

by TechShop Staff Writers - 08-21-2017

BendPak’s HDS-Series alignment lifts are engineered to meet the strenuous demands of even the toughest professional lifting jobs, says the company. The HDS-14LSX alignment system features fro...

BendPak Wins Bid to Supply Automotive Service Equipment to Government

by TechShop Staff Writers - 03-10-2017

BendPak Inc. recently won a contracted bid to provide municipalities and government buyers with lifts, wheel balancers, tire changers and brake lathes. The bid was awarded through the National ...

Ranger Wheel Balancer Features Faster Speeds While Taking Up Less Space

by TechShop Staff Writers - 02-06-2017

The DST30P is a cost-effective hybrid unit that offers the most precise readings you’ll ever generate from a wheel balancer, says the company. The DST30P handles wheels up to a 30” diameter...

BendPak Enhances Two-Post Car Lift Line

by TechShop Staff Writers - 06-06-2016

BendPak recently unveiled an entirely new series of two-post lifts that feature two-stage telescoping screw pads. The recent total model overhaul includes other design enhancements that focus on str...

BendPak-Ranger Introduces 3D Wheel Alignment System

by TechShop Staff Writers - 07-22-2015

Ranger Products recently introduced its new Target 3DPro 3D Imaging Wheel Alignment System for domestic and import cars and trucks. Lightweight impact-resistant wheel targets and high-resolution to...

BendPak's Powerful Ranger Oil Filter Crusher Goes Green To Save Green

by TechShop Staff Writers - 05-19-2015

In just 20 seconds, Ranger Products’ high-powered RP-20FC Oil Filter Crusher applies 10 tons of pure, air-operated pressure to just about any used oil filter, easily reducing it to 25% of its origin...

Ranger Introduces New Automatic Leverless Tire Changer

by TechShop Staff Writers - 07-23-2014

Ranger Products, a division of BendPak Inc., is bringing another new tire changer to market. Its latest R80DTXF tire changer features an automatic bead lifter, variable speed turntable and bilateral b...

Ranger Introduces New Automatic Leverless Tire Changer

by TechShop Staff Writers - 04-15-2014

Ranger Products, a division of BendPak Inc., is bringing another new tire changer to market. Its latest R80DTXF tire changer features an automatic bead lifter, variable-speed turntable and bilateral b...

Ranger Introduces New Multi-Speed Tire Changer

by TechShop Staff Writers - 02-18-2014

Ranger Products, a division of BendPak Inc., is bringing another new tire changer to market. The company’s new R980ATF is a variable-speed model that performs masterfully on a wide variety of wh...

BendPak's New Low-Rise Lift Picks Up Where Others Leave Off

by TechShop Staff Writers - 01-30-2014

BendPak recently unveiled its new LR-5T — a 10,000-lb. capacity low-rise lift that accommodates passenger cars and trucks thanks to a newly designed lift platform, specialty adapters, wider drive-...

The QuickJack By Ranger Is the Ultimate Motorsports Jack System

by TechShop Staff Writers - 10-15-2013

Ranger Products, a division of BendPak, recently unveiled its new QuickJack portable jack system that makes vehicle maintenance — on the track and off — convenient and lightning fast. The 3,500-lb...

Recent News

BendPak Set to Begin Construction on New Facility Early 2018

by TechShop Staff Writers - 10-27-2017

  BendPak Inc. is set to expand for the second year in a row with a 50,000+ sq. ft. facility. The move, coming on the heels of a massive expansion just months prior, marks a new chapter fo...

BendPak Opens New 70,000-sq.-ft. Warehouse

by TechShop Staff Writers - 03-06-2017

   BendPak Inc. has added yet another large-scale expansion to its complex. After nearly seven months of construction, the completed 70,000 sq. ft. shipping and receiving facility, which sits jus...

Blue No More, BendPak Goes Gray

by TechShop Staff Writers - 11-17-2016

BendPak is switching the color of its lifts from its traditional blue to gunmetal gray. According to the company, “People know us well enough that we don’t need to announce our presence eve...

Bendpak Breaks Ground On New Warehouse and Shipping Complex

by TechShop Staff Writers - 10-30-2014

    BendPak, Inc. announced the recent groundbreaking to celebrate beginning construction of a 67,000 square-foot multipurpose warehouse and shipping center located on 3.7 acres of...

Videos


Cutting Edge Automotive Solutions

Phone: 855-839-2626 22703 Racine Street , Robertsdale AL 36567, USA

Recent Products

Recent News

Cutting Edge Automotive Solutions Launches New Online Store

by TechShop Staff Writers - 06-18-2019

In keeping with the tradition of providing world-class customer experience, Cutting Edge Automotive Solutions launched a brand-new online store CEASUSA.COM. The main emphasis of the new website i...

Videos


Hunter Engineering Company

Hunter Engineering logo
Phone: 314-731-3020Fax: 314-731-0000
Contact: Maddie Laviolettehttp://www.hunter.com
11250 Hunter Drive, Bridgeton MO 63044, United States

Recent Products

Hunter Engineering unveils new BL Series bench lathe at the 2019 SEMA Show

by TechShop Staff Writers - 11-13-2019

Hunter Engineering unveiled their new BL Series bench lathe at the 2019 SEMA Show in Las Vegas. The BL Series bench lathe adds new capabilities to their previous generation models. The BL Seri...

Hunter Engineering Releases Harsh-Duty Option for Standard RX Lift Racks

by TechShop Staff Writers - 06-17-2019

Hunter Engineering has released an optional harsh-duty variation for its standard RX scissor lift racks. First in the industry to introduce powder-coating on runway-style lift racks, Hunter no...

Hunter Engineering Announces Inspection Integration with Dealer-FX

by TechShop Staff Writers - 05-29-2019

Hunter Engineering has announced a new integration partnership with Dealer-FX and its ONE Platform service experience. A service dashboard that provides control over dealership workflow and creat...

Hunter Engineering's Tool Brings In More Revenue by Reporting Alignment Machine Utilization

by TechShop Staff Writers - 03-12-2019

Hunter’s Push Reports are available for shops with Hunter’s HawkEye Elite alignment machine. Push Reports have proven to increase shop productivity and performance by providing managers with ...

Hunter Engineering to Showcase Quick Tread Edge at NADA Show

by TechShop Staff Writers - 01-23-2019

Hunter Engineering will showcase its next-generation drive over tire tread depth measuring tool, Quick Tread Edge, at the 2019 NADA Show, Jan. 25 – 27 (Booth No. 4605N) in San Francisco, CA. ...

Hunter Engineering Releases Performance-Driven Tool for Inspection Equipment

by TechShop Staff Writers - 01-09-2019

Hunter Engineering’s new performance-driven tool, Push Reports, is now available for shops with Hunter inspection equipment. Push Reports boost shop performance by automatically providing manage...

Hunter Engineering Launches Public Merchandise Shop

by TechShop Staff Writers - 12-18-2018

Hunter Engineering has launched a new merchandise website through hunter.com for anyone who would like to purchase Hunter promotional and merchandise products, such as hats, apparel, die cast mode...

Hunter Engineering SmartWeight Pro Offers Premium Features

by TechShop Staff Writers - 12-11-2018

Hunter Engineering Company's SmartWeight Pro is latest intuitive, mid-range wheel balancer that offers upscale, premium features. The wheel balancer is equipped with a no-touch wheel measureme...

Hunter Engineering Introduces Quick Tread Edge at SEMA

by TechShop Staff Writers - 10-30-2018

Hunter Engineering Company will showcase its next-generation drive over tire tread depth measuring tool, Quick Tread Edge, at the 2018 SEMA Show on Oct. 30 – Nov. 2 (South Hall, Booth 41013). ...

Hunter Engineering to Showcase Touchless Inspection Technology at SEMA

by TechShop Staff Writers - 10-30-2018

Hunter Engineering Company will showcase its new unmanned alignment inspection system, Quick Check Drive at the 2018 SEMA Show on Oct. 30 – Nov. 2 (South Hall, Booth 41013). Released in July ...

Hunter Engineering Launches 2 Center-Clamp Tire Changer Models

by TechShop Staff Writers - 08-16-2018

Hunter Engineering Company has launched its latest family of center-clamp tire changer models, the TC37 and TC39. Both models offer immense features and value in the growing segment of mid-rang...

Hunter Engineering Launches Quick Check Drive — a Touchless Alignment Inspection System

by TechShop Staff Writers - 07-18-2018

https://www.youtube.com/watch?v=d4HeoAwSRNM Hunter Engineering Co. launched its latest vehicle service innovation, Quick Check Drive – a touchless alignment inspection system that provides insta...

Hunter Engineering Introduces Quickgrip Adaptors for Fast Alignment

by TechShop Staff Writers - 05-14-2018

Hunter introduced the WinAlign HD QuickGrip adaptors that provide faster installation to speed alignment service and prevent rim damage with no metal-to-metal contact. With the WinAlign and QuickG...

Hunter Introduces New Low-profile, High-capacity Lift Rack

by TechShop Staff Writers - 04-20-2018

Hunter's new RX14 Scissor Lift provides massive capacity with a small footprint. The RX14 Fully Integrated Alignment speeds alignment service by 60 percent with synchronized aligner and lift ra...

Hunter's Revolution Tire Changer Offers Autonomous Operation

by TechShop Staff Writers - 04-18-2018

The Revolution tire changer with WalkAway capability from Hunter Engineering features 80 seconds of autonomous bead breaking and demounting that can be performed without an operator present. Th...

Hunter Engineering Presents Tire Changer T.K.O. Video Series

by TechShop Staff Writers - 03-15-2018

See the TCX Table-Top Tire Changer series in action in this informative new video series. Hunter's tire changer scientists conducted a series of comparison tests to demonstrate the mass, power, spee...

Hunter Releases Educational Video to Answer the Question: Why Do Cars Need Wheel Alignment?

by TechShop Staff Writers - 02-07-2018

Hunter has released an educational video to answer the common question: "Why do cars need wheel alignment?" to explain the purpose and function of wheel alignment procedures and the importance of pr...

Hunter Road Force Elite Balancer Update 4.0 Released

by TechShop Staff Writers - 11-29-2017

Miscentering during wheel balancing is a major cause of improper balancing and customer comebacks. Hunter’s Road Force Elite features Automatic CenteringCheck technology with new 4.0 software th...

Hunter's Revolution Tire Changer's WalkAway Capability Reduces Tire Changing and Balancing Times

by TechShop Staff Writers - 11-06-2017

The Revolution tire changer with WalkAway capability features 80 seconds of autonomous bead breaking and demounting that can be performed without an operator present. The Revolution allows the operato...

Hunter Releases Next-Generation WinAlign Consoles

by TechShop Staff Writers - 08-28-2017

Hunter introduces the next generation of WinAlign consoles, WA500 and WA600. The new consoles feature Hunter’s new HW2 PC running Windows 10 and WinAlign 15.1 software. The HawkEye Elite aligner ...

Hunter Releases New Quick Tread Console for Automatic Inspection Technology

by TechShop Staff Writers - 08-16-2017

Hunter’s Quick Tread inspection technology automatically measures tire tread depth and captures vehicle identification in seconds as motorists drive into the service lane. The new, compact console p...

Hunter Quick ID Vehicle Identification Technology Accelerates Inspection Times

by TechShop Staff Writers - 06-13-2017

Technicians can accelerate Hunter vehicle inspections with Quick ID. The new technology automates vehicle identification, saving valuable time and labor. Quick ID instantly identifies the vehic...

Time-Saving and Ease-of-Use Accessories Included with Hunter TCX625 Plus HD Tire Changer

by TechShop Staff Writers - 05-26-2017

Hunter’s TCX625 Plus HD combines compact size with a unique mount/demount roller mechanism to provide high performance servicing of heavy-duty, over-the-road truck assemblies and includes severa...

Hunter Engineering Offers Compact Inspection Lane Footprint Option

by TechShop Staff Writers - 04-26-2017

The Quick Check inspection lane and Quick Tread drive-over tread depth system from Hunter Engineering Company now feature a 25% smaller footprint option. Now customers with tighter space requir...

Hunter Releases New Mount Head for Table-Top Tire Changers

by TechShop Staff Writers - 01-03-2017

Hunter’s new plastic mount head for tabletop tire changers is optimized for today’s wheels. Raised spoke wheels and clad wheels that can challenge other mount heads are simple for Hunter’...

Hunter Engineering’s Updated Tire Changer Features Enhanced Split-Bead Roller System

by TechShop Staff Writers - 12-05-2016

Updates to Hunter Engineering Company's TC3700 tire changer enhance ease-of-use with a new bead roller positioning system, says the company. The new controls allow the operator to easily pre-posit...

Hunter Engineering Releases New AutoComp Elite Brake Lathe

by TechShop Staff Writers - 11-16-2016

Hunter has released the new AutoComp Elite brake lathe featuring automatic compensation technology. The patent-pending AutoComp compensation system directly determines the position of the internal...

Perform Alignment Checks with Proper Tire Pressure on Hunter Engineering's Inflation Station

by TechShop Staff Writers - 10-25-2016

Hunter Engineering Co. has launched a new Inflation Station that is compatible with its Quick Check system. The station may also be installed as an independent system, the company said. The Inf...

Hunter Quick Tread Adds Enhanced Flush Mount Design

by TechShop Staff Writers - 10-10-2016

Hunter Engineering Co.’s Quick Tread system is now available in a new flush mount design. According to Hunter, the new design eliminates obstructions or obstacles in the inspection lane and h...

Hunter HD PowerSlide Turnplates Available In Flush Mount Configuration

by TechShop Staff Writers - 06-22-2016

Hunter Engineering’s WinAlign HD alignment system now offers PowerSlide turnplates in a flush mount configuration as a component of Fully Integrated Alignment (FIA). New flush mount PowerSlide ...

Hunter's Road Force Elite Features Patented Vision System

by TechShop Staff Writers - 04-28-2016

The new Road Force Elite is Hunter’s fastest diagnostic wheel balancer and performs both a traditional balance and Road Force Measurement in less time than it takes to complete a conventional balanc...

Updates to Hunter's TCX625 Heavy-Duty Tire Changer Reduce Service Speeds

by TechShop Staff Writers - 02-23-2016

The updated TCX625HD from Hunter Engineering features a drop down inner roller to reduce service time by 25% and increase ease-of-use. The pedal-controlled inner roller saves the operator time and ...

Hunter's Quick Check Now Includes Heavy-Duty Battery Clamps

by TechShop Staff Writers - 02-03-2016

Hunter’s battery tester now offers optional heavy-duty clamps. These new battery clamps were designed with increased strength and durability, to hold-up in today’s tough shop environment. H...

Hunter Engineering Showcases New Aligner Console Handheld Remote With Enhanced Features

by TechShop Staff Writers - 01-06-2016

At SEMA 2015, Hunter previewed its enhanced aligner console handheld remote, which features an integrated flashlight and numeric keypad to increase functionality. Handheld remote improvements allow...

Hunter WinAlign Consoles Now Controlled From Any Mobile Device

by TechShop Staff Writers - 12-08-2015

  Hunter’s WinAlign consoles can now be viewed and operated remotely from any mobile device, making the aligner console more convenient and flexible than ever. Using the Splashtop rem...

Hunter’s New Auto34S Features Slim Design, Enhanced Controls

by TechShop Staff Writers - 11-16-2015

Hunter’s new Auto34S features a space saving, functional design that makes this powerful tire changer even easier to use. The ergonomic Auto34S features an air powered, push-button control that o...

Hunter’s Updated Revolution Tire Changer Features Smaller Footprint, Expanded Capabilities

by TechShop Staff Writers - 11-03-2015

  New updates to the Revolution, Hunter’s fully automatic tire changer, have reduced the unit’s footprint by 25% and enhanced ease-of-use. The Revolution’s updated console is now inte...

Extra-Wide Runways Featured On Hunter’s Four-Post Lift

by TechShop Staff Writers - 10-13-2015

Hunter’s L451 four-post lift now features extra-wide 26” runways. The new generation four-post lift family is available in long or standard runway length and open- or closed-front configurations. ...

Hunter’s QuickComp Lathe's Computerized Compensation Adjusts For Lateral Runout

by TechShop Staff Writers - 09-17-2015

Hunter Engineering Company’s QuickComp lathe features a two-way adjustable compensation adaptor that works with Hunter’s patented ProComp computerized compensation to adjust for lateral runout of ...

Hunter’s Quick Tread Now Available In Flush Mount Configuration

by TechShop Staff Writers - 09-08-2015

First previewed for customers at NADA 2015, Hunter Engineering Company announce the Quick Tread drive-over tread depth unit is now available in a flush mount configuration. The flush mount system feat...

Hunter Offers Leverless, Center-Clamp Tire Changer

by TechShop Staff Writers - 06-22-2015

Hunter Engineering Company has introduced the TC3900 tire changer, a high-performance center-clamp tire changer with a bead press arm to assist in mounting difficult assemblies. The TC3900 also fea...

New Enhancements Made to Hunter's Tire Changer

by TechShop Staff Writers - 05-21-2015

Hunter Engineering’s popular TC3700 model center-clamp tire changer has been upgraded to handle today’s tires and wheels even better. A new split roller, bottom bead demount system assists demo...

Hunter Offers New Generation Advanced Tabletop Tire Changers

by TechShop Staff Writers - 05-05-2015

New generation TCX57 tabletop tire changers from Hunter Engineering include several enhanced features for tremendous power and control, according to the company. Building on the TCX575 family, the ...

Faster and Easier Caster Measurements with Hunter’s new WinAlign 14.3 Software

by TechShop Staff Writers - 02-13-2015

Hunter’s new WinAlign 14.3 software reduces the number of steers required to obtain caster measurements, increasing the efficiency and speed of the alignment procedure. Rather than installing the...

Hunter’s Quick Tread Produces Fast, Accurate Tread Depth Readings

by TechShop Staff Writers - 11-25-2014

Hunter Engineering Company announces its new Quick Tread drive-over tread depth system, which uses point cloud technology to automatically measure the tread depth of each tire without a time loss....

New Foot-Pedal-Operated Wheel Lift for Fast and Accurate Wheel Placement

by TechShop Staff Writers - 11-05-2014

Hunter’s new style wheel lift, which is an optional feature on all Hunter wheel balancers, is now operated by a foot pedal, allowing the operator to lift and lower the tire hands free. New wheel ...

Hunter Debuts New HawkEye Elite Alignment

by TechShop Staff Writers - 03-08-2011

Hunter’s HawkEye Elite systems bring Hunter customers unprecedented productivity and other profitable advantages. New and patented QuickGrip adaptors and three-dimensional targets accelerate serv...

Recent News

Hunter Engineering Earns 300th Patent

by TechShop Staff Writers - 12-06-2019

Hunter Engineering is extremely proud to have been granted its 300th US patent this October and to reach this milestone in the undercar equipment industry. Hunter has a team of 75+ mechanical, el...

Hunter Engineering to Participate in SCRS Repairer Driven Education Series at 2019 SEMA Show

by TechShop Staff Writers - 11-01-2019

Hunter Engineering is participating in SCRS Repairer Driven Education: Using Wheel Alignment to Diagnose Suspension (RD22) at the 2019 SEMA Show on Wednesday, Nov. 6, from 3 p.m. to 5 p.m. in Upp...

Hunter Engineering and Bush Specialty Vehicles Partner in Mobile Service at SEMA 2019

by TechShop Staff Writers - 10-31-2019

Hunter Engineering will be hosting Bush Specialty Vehicles in-booth at the 2019 SEMA show to highlight mobile tire service solutions. Anyone interested in learning more about the benefits of mobi...

Hunter Engineering is Now Shipping Quick Tread Edge with Release of WinAlign 16.1

by TechShop Staff Writers - 08-27-2019

Hunter Engineering’s next-generation drive-over tread depth measuring tool, Quick Tread Edge, is now available for order. This announcement comes with Hunter’s latest release of WinAlign 16.1...

Hunter Engineering Releases Difficult Tire and Wheel Fitment Data Trends

by TechShop Staff Writers - 02-28-2019

Hunter Engineering has released data illustrating difficult tire and wheel fitment trends. This data shows a significant shift in growth of difficult tire and wheel assembly fitments throughout th...

Hunter Engineering Now Provides Online Safety System Alignment Information

by TechShop Staff Writers - 02-22-2019

Hunter Engineering Company now provides online safety system alignment information in Hunter’s online business intelligence tool, HunterNet. Safety system reset (or safety system alignment) ...

Hunter Engineering Enhances Connected Equipment Capabilities

by TechShop Staff Writers - 10-09-2018

Hunter Engineering Co. has announced advancements to its online business intelligence tool, HunterNet. First introduced in 2002, HunterNet provides real-time data to shops through equipment re...

Hunter Engineering, AutoVitals Announce New Inspection Integration

by TechShop Staff Writers - 10-02-2018

Hunter Engineering Company and AutoVitals announced a new integration with their vehicle inspection technology. The joint integration empowers service providers to quickly present inspection findi...

Hunter Announces Integration of FrogData Action Analytics to Quick Check Inspection System

by TechShop Staff Writers - 03-21-2018

Hunter Engineering Co. has announced the integration of FrogData Action Analytics into the Quick Check inspection system. According to the company, the new system will help shops to maximize serv...

Hunter Engineering Featured on Performance TV and Velocity

by TechShop Staff Writers - 01-24-2018

  Hunter Engineering is being featured by Masters Entertainment: Perfomance TV and Brenton Productions: Velocity through February 2018. Hunter Engineering showcased 20 new and enhanced product...

Hunter Releases Revolution with WalkAway Operation Video

by TechShop Staff Writers - 12-28-2017

See the Revolution tire changer with WalkAway operation in action with a new video that features autonomous bead breaking and demounting that can be performed without an operator present. Click...

Hunter Engineering Offers Online Self-Study Program

by TechShop Staff Writers - 08-02-2017

Hunter Engineering is now offering Hunter University, a free, comprehensive online self-study program for technicians and industry professionals. “This educational tool is an easy and effecti...

Hunter Engineering Launches Completely Redesigned Hunter.com

by TechShop Staff Writers - 07-10-2017

Hunter Engineering has launched a completely redesigned Hunter.com. The new site places even better emphasis on Hunter’s local teams and industry leading products, says the company. One click...

Hunter Quick Tread Console Measures Tire Tread Depth in Seconds

by TechShop Staff Writers - 06-27-2017

Hunter Engineering Co. has released a new console for its Quick Tread inspection technology that automatically measures tire tread depth and captures vehicle identification in seconds. The new, com...

Hunter’s Quick Check and Quick Tread Integrate with BOLT ON TECHNOLOGY

by TechShop Staff Writers - 03-08-2017

Hunter Quick Check and Quick Tread inspection systems now feature integration with Mobile Manager Pro by BOLT ON TECHNOLOGY, a digital multi-point inspection tool featuring color-coded results and...

Hunter Engineering Showcases WinAlign 15.0 Software

by TechShop Staff Writers - 01-30-2017

Hunter Engineering has introduced WinAlign version 15.0, which has many enhancements including support for Safety System Alignment and Quick ID. In addition to a mechanical alignment, manufactu...

Provide Customers with a Diagnostic Health Report from Hunter and Identifix

by TechShop Staff Writers - 12-20-2016

    Hunter Engineering’s Quick Check inspection system is now enhanced with a state-of-the-art Diagnostic Health Report powered by Identifix. Quick Check, along with the Ident...

Hunter’s Quick Check and Quick Tread Fully Integrate with AutoServe1

by TechShop Staff Writers - 12-09-2016

Hunter Engineering’s Quick Check and Quick Tread systems now fully integrate with the AutoServe1 complete vehicle inspection and customer communication system. This allows shops to immediatel...

Hunter Kicks Off Social Media Contest

by TechShop Staff Writers - 08-11-2016

Hunter Engineering is giving away trips to the 2016 SEMA Show as well as the chance to win a SmartWeight Touch wheel balancer as part of a social media contest. Shop owners can enter the contest by...

Hunter Quick Check and Quick Tread Are Integration-Ready

by TechShop Staff Writers - 05-18-2016

  Hunter Engineering announces the Quick Check inspection system and Quick Tread tread depth measurement system are integration-ready. Quick Check instantly sends vehicle inspection data t...

Hunter Quick Check and Quick Tread Now Seamlessly Integrate with AutoPoint

by TechShop Staff Writers - 04-14-2016

Hunter Engineering’s Quick Check and Quick Tread now seamlessly integrate with Solera's AutoPoint. The Hunter inspection results are automatically paired with the complete electronic MultiPoint i...

Choose the Right Tire Changer for Your Shop with Hunter's Decision Guide

by TechShop Staff Writers - 03-11-2016

Hunter has released a new Tire Changer Decision Guide to highlight the benefits and features of different tire changer models. It is important for shops to find a tire changer that is a good match for...

Hunter's Social Media Contest Includes Trips to SEMA 2015

by TechShop Staff Writers - 08-04-2015

Hunter Engineering has launched a new, two-part social media contest that offers trips to SEMA 2015 and the chance to win a free SmartWeight Touch wheel balancer at the show. Before SEMA, two shops...

Hunter’s HawkEye Elite Alignment System Approved by Mercedes-Benz

by TechShop Staff Writers - 03-18-2015

Mercedes-Benz has approved Hunter’s HawkEye Elite alignment system for use in their workshops worldwide. HawkEye Elite uses four precision cameras to measure the position and orientation of targe...

Hunter Releases New Technical and Training-Specific Channel on YouTube

by TechShop Staff Writers - 01-27-2015

Hunter Engineering Company has launched a new technical and training channel on YouTube, called the Hunter Learning Channel. The Hunter Learning Channel features extensive training video playlists ...

Videos


Induction Innovations Inc.

Phone: 877-688-9633Fax: 847-551-3369 120 Center Drive, Gilberts IL 60136, United States

Recent Products

Induction Innovations Introduces New Mini-Ductor Bearing Buddy Coil Pack

by TechShop Staff Writers - 10-10-2019

Induction Innovations, Inc. introduces the new Bearing Buddy Coil Pack, for use with the Mini-Ductor series. The Mini-Ductor product line allows users to release hardware from corrosion or thread...

Induction Innovations Introduces New Mini-Ductor Thin Wall Coil Pack

by TechShop Staff Writers - 10-09-2019

Induction Innovations, Inc. introduces the new Thin Wall Coil Pack, for use with the Mini-Ductor series. The Mini-Ductor product line allows users to release hardware from corrosion or thread loc...

Induction Innovations Launches Their Highest Powered Mini-Ductor

by TechShop Staff Writers - 10-08-2019

Induction Innovations, Inc. announces the launch of Venom HP: the fourth generation and the highest powered Mini-Ductor handheld induction heater. The Venom HP will start shipping in the U.S. and...

Induction Innovations Introduces Mini Induction Heater

by TechShop Staff Writers - 09-18-2018

The newly designed Mini-Ductor induction heater, the Mini-Ductor Venom, generates Invisible Heat to release ferrous and some non-ferrous metals from corrosion and thread lock compounds without th...

Induction Innovations 5-Step Windshield Removal

by TechShop Staff Writers - 05-26-2018

Induction Innovations’ Inductor Glass Blaster can make the tough job of removing an automotive windshield easier and more profitable without the need for wires, knives or other traditional tools...

Induction Innovations Customizable Inductor Kit

by TechShop Staff Writers - 05-01-2018

Induction Innovations customers can now customize their kits by choosing which attachments they want when purchasing an Inductor Series Pro-Max, Max and/or Lite. After choosing a base induction heat...

Induction Innovations Offers Five-Step Windshield Removal with Induction Heat

by TechShop Staff Writers - 04-18-2018

Induction Innovations’ Inductor Glass Blaster can make the tough job of removing an automotive windshield a lot easier — and more profitable. The Glass Blaster is a unique time-saving appr...

Precise and Manageable Invisible Heat from Induction Innovations

by TechShop Staff Writers - 01-10-2018

  Mini-Ductor Venom (MDV-777) from Induction Innovations generates "invisible heat" to release ferrous and some non-ferrous metals from corrosion and thread lock compounds without the dangers ...

High Performance Induction Heating System from Induction Innovations

by TechShop Staff Writers - 06-16-2017

  Using high frequency magnetic fields, the Inductor Pro-Max Fully Loaded from Induction Innovations utilizes Invisible Heat to easily remove parts bonded to metal. In seconds, you will be...

Go Flameless with Induction Heat from Induction Innovations

by TechShop Staff Writers - 04-05-2017

  The Mini-Ductor Venom from Induction Innovations generates Invisible Heat to release ferrous and some non-ferrous metals from corrosion and thread lock compounds without the dangers of o...

Induction Innovations' Inductor Lite Gives More Control Over Induction Heat Levels

by TechShop Staff Writers - 03-06-2017

  Induction Innovations has introduced its Inductor Lite, a compact, 2,400W addition to the Inductor Series with a digital interface for manual heat control. Using high frequency magnet...

Easily Loosen Corroded Fittings with Venom from Induction Innovations

by TechShop Staff Writers - 07-12-2016

Induction Innovations, Inc. announces the launch of Venom, the third generation of the Mini-Ductor handheld induction heater. “Venom is a new evolution of the Mini-Ductor Series, which has been t...

Portable Invisible Heat From Induction Innovations

by TechShop Staff Writers - 09-17-2015

Induction Innovations has re-engineered its flameless torch into the new 12V Mini-Ductor. The Mini-Ductor is completely portable and works with a standard 12V battery pack or off of a car battery. ...

Induction Innovations Brings Invisible Heat To Paintless Dent Repair

by TechShop Staff Writers - 12-05-2014

Induction Innovations has developed a PDR attachment (P/N U-111) to complement its line of high performance induction heating tools. Unlike traditional PDR, the Invisible Heat method is the cleanest a...

Recent News

Customize Your Inductor Kit – Series Now Available with Your Choice of Attachment

by TechShop Staff Writers - 02-05-2018

Induction Innovations has announced that customers and authorized resellers can now "customize your kit" by choosing which attachments they want when purchasing an Inductor Series Pro-Max, Max and...

Induction Innovations Advises When to Replace Mini-Ductor Induction Heating Coils

by TechShop Staff Writers - 06-27-2017

The effectiveness and safety of Mini-Ductor Venom and Mini-Ductor II portable induction heaters are contingent on the state of the coils used with them. According to the manufacturer, Induction...

Videos


Kaeser Compressors, Inc.

Phone: 800-981-6888Fax: 540-898-5520 511 Sigma Drive, Fredericksburg VA 22408,

Recent Products

Kaeser Announces New VFD Models With Improved Efficiency

by TechShop Staff Writers - 05-29-2019

Kaeser Compressors has redesigned its Sigma Frequency Control (SFC) 45, 55, 75S, 90S and 110S compressors with advanced SynRM motor-drive combinations. These 60-125 hp units offer ...

Kaeser Compressors Celebrates 100 Years of Innovation

by TechShop Staff Writers - 04-30-2019

Kaeser Kompressoren is celebrating its centennial year. Established in 1919 as a machine workshop in Coburg, Germany, by Carl Kaeser, Sr., the company has grown into a leading compressor manufact...

Kaeser Compressors Introduces Redesigned SM Series Rotary Screw Compressors

by TechShop Staff Writers - 01-24-2019

The new SM 7.5, SM 10, SM 15, and SFC 8 models are the latest examples of Kaeser Compressors' ongoing commitment to product developments designed to reduce customers' energy costs, improve overall...

Kaeser SmartPipe+ Compressed Air Piping System Simplifies Connections

by TechShop Staff Writers - 12-14-2018

Kaeser's new SmartPipe+ is a versatile, modular aluminum piping system featuring lightweight materials and simple, compression-style connections. Available in multiple sizes from 3/4 in. to 2-1...

Kaeser Modular Aluminum Compressor Piping System Available in 5 Sizes

by TechShop Staff Writers - 09-05-2018

Kaeser Compressors’ SmartPipeXL is available in five sizes between ¾ in. and 2-1/2 in., with 3 in., 4 in., 6 in., and 8 in. pipe options. Ideal for headers and branch lines, the SmartPipeXL can...

Kaeser Lightweight Modular Aluminum Piping System

by TechShop Staff Writers - 05-23-2018

Kaeser Compressors’ SmartPipe+ Compressed Air Piping System is a versatile, modular aluminum piping system featuring lightweight materials and simple, compression style connections. The SmartPip...

Kaeser's SmartPipe+ Offers Versatile Aluminum Piping System for Shops

by TechShop Staff Writers - 08-29-2017

Kaeser Compressors announces its SmartPipe+ is now available. SmartPipe+ is a versatile, modular aluminum piping system featuring lightweight materials and simple, compression-style connections. Av...

Kaeser Presents Line of Compressed Air Filters

by TechShop Staff Writers - 10-24-2016

Kaeser Compressors, Inc.'s expanded air treatment product line features new compressed air filters available in flows from 20 to 500 scfm. These rugged filters deliver reliable compressed air quality ...

Kaeser's Smartpipe Now Available In 2" Diameter

by TechShop Staff Writers - 12-22-2015

Kaeser's versatile aluminum SmartPipe is now available in a 2" diameter. SmartPipe is a modular, aluminum compressed air distribution system featuring lightweight materials and simple connectors t...

Kaeser Launches New Variable Speed Drive Compressor

by TechShop Staff Writers - 11-19-2015

Kaeser Compressors offers the SFC 22, a variable speed drive rotary screw compressor with a flow range of 36-152 cfm at 125 psig. Kaeser has improved the SFC's specific power through a combination ...

Kaeser Compressors Offers Compact Refrigerated Dryers

by TechShop Staff Writers - 08-25-2015

Kaeser Compressors has released a new line of refrigerated dryers for use with rotary compressors up to 40 hp. Kaeser’s Kryosec TAH-TCH series of refrigerated dryers feature the best in German engin...

Kaeser's Redesigned AS Series Compressors Up To 30% More Efficient

by TechShop Staff Writers - 12-01-2014

Kaeser Compressors, Inc. offers its AS series of rotary screw compressors. These units deliver "built-for-a-lifetime" reliability, simple maintenance and sustainable energy savings, and are available ...

Recent News

Kaeser Compressors Launches New Website

by TechShop Staff Writers - 10-15-2018

To better serve their customers and distribution network, Kaeser Compressors, Inc. has launched a new U.S. site featuring a secure protocol with built in redundancy, simplified navigation, mobile ...

Kaeser Compiles A Maintenance Plan For Your Compressed Air System

by TechShop Staff Writers - 09-01-2015

Kaeser Compressors, Inc. has published a new entry to the company blog Kaeser Talks Shop. This blog entry gives five tips for putting together a maintenance plan for a compressed air system. “...

Kaeser Publishes New Compressed Air System Installation Guide E-Book

by TechShop Staff Writers - 05-07-2015

Kaeser Compressors, Inc. has published a new e-book titled Compressed Air System Installation Guide: Layout Considerations for a Reliable, Energy Efficient, and Safe Compressed Air System. This...

Kaeser Presents 7 Deadly Sins of Compressed Air

by TechShop Staff Writers - 02-20-2015

When putting together a compressed air system, temptation is all around you. You want the best system, but having the best doesn’t mean grabbing whatever looks good. Build a system that meets your n...

Videos


Lumax, LLC.

Phone: 704-940-6988Fax: 704-940-6993 3705 Centre Circle, Fort Mill SC 29715, US

Recent Products

Lumax Lubrication Kit Conveniently Organizes Accessories

by TechShop Staff Writers - 02-11-2019

Lumax released a new Lubrication Accessory Kit that holds Lumax's 11 most popular lubrication accessories. The kit allows you to organize and store your lubrication accessories in a conven...

New Heavy-Duty Swivel Handle Oil Filter Wrenches from Lumax

by TechShop Staff Writers - 03-28-2018

Lumax’s new swivel handle oil filter wrenches are constructed from high-quality components, making them built for lasting use and durability. The filter wrenches are ergonomically designed for the...

New Extra-Long Quick-Release Grease Coupler from Lumax

by TechShop Staff Writers - 03-07-2018

Lumax’s exclusive patented design heavy-duty extra-long quick-release coupler has an innovative design that allows it to firmly latch onto the grease fitting, enabling hands-free greasing. The h...

Lumax Offers Dual-Leverage Premium Heavy-Duty Grease Gun

by TechShop Staff Writers - 01-18-2018

  The LX-1153 is Lumax’s heavy-duty, dual-leverage premium pistol grease gun. It has a balanced and ergonomic design that provides easy one-hand operation. The cast-alloy head develop...

Lumax Offers 4-in-1 Oil Filter Wrench Set

by TechShop Staff Writers - 12-28-2017

The Lumax LX-1805 is a heavy-duty, swivel handle oil filter wrench with four interchangeable, 1” (25mm) wide steel bands. The bands are easily interchanged with the use of two detent pins. Th...

Lumax Announces Fuel Transfer Pump Kit

by TechShop Staff Writers - 12-18-2017

The Lumax LX-1377 is a heavy-duty, industrial-grade fuel transfer pump for pumping oil or petroleum-based products such as gasoline, diesel, kerosene and mineral spirits. It has a highly effici...

Lumax's Eight-in-One SAE & Metric Oil Drain Plug Swivel Wrench Features Patented Design

by TechShop Staff Writers - 11-20-2017

The eight-in-one SAE and Metric oil drain plug swivel wrench set is a Lumax proprietary and patented design. It features eight socket sizes all in one tool. The LX-1865 and LX-1866 fit most oil...

Lumax Offers New Heavy Duty Quick-Release Grease Coupler

by TechShop Staff Writers - 10-09-2017

The exclusive patented design of Lumax’s heavy-duty quick release coupler allows it to firmly latch onto the grease fitting, enabling hands-free greasing. The heavy-duty quick release grease cou...

Lumax Offers Multi-Purpose 2-Piece Strap Wrench Set

by TechShop Staff Writers - 09-15-2017

The Lumax LX-1819 is a two-piece multi-purpose strap wrench set that includes one large (24”/60cm) and one small (20”/50cm) handed strap wrench. It has a non-slip, industrial strength, rubber ...

Lumax Offers New LX-1389 Fluid Dispenser with Syringe-Action

by TechShop Staff Writers - 09-06-2017

Lumax’s new simple syringe-action Fluid Dispenser can quickly and cleanly extract or dispense fluids into and out of small reservoirs. It is perfect for a variety of fluid exchange applications ...

Recent News

Videos


Motor Guard Corporation

Motor Guard logo
Phone: 209-239-9191Fax: 209-239-5114 580 Carnegie Street, Manteca CA 95337, US

Recent Products

Motor Guard Introduces Line of Miniature Sanding Blocks

by TechShop Staff Writers - 06-12-2018

Motor Guard introduced a first of its kind line of miniature sanding blocks. These new blocks are constructed of a specially formulated compound and their ergonomic shapes allow for fine, fingerti...

Motor Guard Activated Carbon Filter Removes Oil Vapor in Automotive Finishing

by TechShop Staff Writers - 05-31-2018

Motor Guard’s Activated Carbon Filter removes oil vapor from compressed air for premium and waterborne finishes that demand cleaner air. The Carbon-Max Cartridge contains activated carbon media t...

Motor Guard Stud Welder Kit Designed for 'No Holes' Dent Repair

by TechShop Staff Writers - 05-23-2018

Motor Guard’s latest addition to their Magna-Spot line of stud welders, the JO-1050 Entry-Plus Kit has improved Striker-Tip Draw Pins for strong welds on all steels. The kit is designed for “n...

Motor Guard’s Plastic Repair System Kit Now Includes Exclusive Ironing Tip

by TechShop Staff Writers - 01-10-2018

Motor Guard has re-introduced the Magna-Stitcher Plastic Repair System (MS-2500). The MS-2500 is a complete unit with all the power and accessories needed for structural repair of plastic parts. ...

Motor Guard Introduces Latest Stud Welder Kit

by TechShop Staff Writers - 11-17-2017

Motor Guard introduced a new enhancement to its Magna-Spot line of Stud Welders, the JO-1050 Entry-Plus Kit with Striker-Tip Draw Pins for strong welds on all steels. Specially designed for “No-Ho...

Motor Guard Introduces Plastic Repair System with Exclusive Ironing Tip

by TechShop Staff Writers - 08-08-2017

Motor Guard is re-introducing the Magna-Stitcher Plastic Repair System (MS-2500). The MS-2500 is a complete unit with all the power and accessories needed for structural repair of plastic parts. ...

Motor Guard Introduces Unique Line of Flexible Sanding Blocks

by TechShop Staff Writers - 06-08-2017

Motor Guard has introduced a new line of flexible sanding bars for detail sanding applications. These new blocks are constructed of a dense yet flexible compound that allows bending to suit body p...

Motor Guard Introduces Abrasive Cut-Off Wheel Designed for Aluminum

by TechShop Staff Writers - 11-07-2016

Motor Guard has developed a resin-bonded abrasive cut-off wheel specifically designed for cutting automotive aluminum body panels and structural components. Available in 3” (JMC300AL) and 4” (...

Motor Guard Introduces Aluminum Spot Repair Tool

by TechShop Staff Writers - 04-18-2016

  The new Motor Guard Magna-Stripper AL System (Model E-6100S) is a soft, abrasive wheel that has been specially formulated to strip aluminum without heat, distortion or damage. The E-6...

Motor Guard's System Erases Surface Rust In Seconds

by TechShop Staff Writers - 12-09-2015

Motor Guard says its Magna-Stripper System (E-6080S) is the “ultimate spot repair tool” for steel and aluminum body panels. The Magna-Stripper quickly strips clear coat, base coat, primer c...

Motor Guard Offers New Rigid Sanding Blocks For High-Performance Blocking

by TechShop Staff Writers - 12-22-2014

Motor Guard has developed seven new Super-Rigid Big Block models for fast and aggressive blocking on aluminum or steel. Engineered from super-dense yet light-weight materials, these new sanding blo...

Motor Guard Expands Line of Rigid Sanding Blocks

by TechShop Staff Writers - 09-30-2014

Motor Guard has expanded its line of Super-Rigid Big Block models for fast and aggressive blocking of aluminum or steel. Engineered from super-dense yet light-weight materials, these new sanding b...

Motor Guard Offers Magna-Spot Entry-Plus Stud Welder Kit

by TechShop Staff Writers - 05-27-2014

Motor Guard offers an American-made solution to no-holes dent repair. Backed by a five-year warranty, the JO1050 kit features and provides all the basics needed for professional dent repair. Des...

Motor Guard Introduces Line Of Rigid Sanding Blocks

by TechShop Staff Writers - 12-18-2013

Adding to the popular Big-Block line, Motor Guard has developed three new Ultra-Rigid Big Block models for fast and aggressive blocking. Engineered from super-dense yet lightweight materials, these ...

Plastic Repair System Introduced by Motor Guard

by TechShop Staff Writers - 01-24-2013

Motor Guard introduces the Magna-Stitcher Plastic Repair System (Model MS-2500), a complete unit with all the power and accessories needed for structural repair of plastic parts. The MS-2500 featur...

Recent News

Videos


Pinnacle Automotive Systems

Phone: 855-839-2626 22703 Racine Street, Robertsdale AL 36567, USA

Recent Products

Pinnacle Automotive Systems Presents Next Generation Heavy Truck Aligner

by TechShop Staff Writers - 12-17-2019

Pinnacle Automotive Systems is proud to present the next generation Jumbo 3D Heavy Truck Aligner (J3DHDA) with the ability to align six axles simultaneously in under three minutes, which can also...

Recent News

Videos


1 2 3 10
Connect with us
Connect