H & S Autoshot

302 Rolling Hill Road
Mooresville NC 28117
Phone: 980-500-1015Fax: 980-500-1020
Categories: Body Shop Equipment, Paint & Body Shop Tools, Welding

Recent Products

H&S Autoshot Unveils New Aluminum Hammer Set

by TechShop Staff Writers - 12-16-2015

H&S Autoshot has introduced the new UNI-7803 aluminum hammer set. The set is offered as an accessory to the newly released UNI-9850 aluminum/steel dent repair station for aluminum panel fin...

Recent News


Hand Stuff (The)

557 Nassau St # 1
Orange NJ 07050
Phone: 888-779-8976
Categories: Shop Safety/Personal Protection, Shop Supplies

Recent Products

New Reparative Hand Balm From The Hand Stuff

by TechShop Staff Writers - 12-04-2015

The “Hand Stuff” has launched its all-natural hand balm. The hands are the most useful and beneficial tool for any technician. Your work performance is dependent upon the health and fitness of ...

Recent News


Hannay Reels

553 State Route 143
Westerlo NY 12193-0159
United States
Phone: 877-467-3357Fax: 800-733-5464
Categories: Reels & Accessories, Shop Equipment

Recent Products

Hannay Reels' N800 Series Features Non-Sparking Ratchet Assembly

by TechShop Staff Writers - 01-27-2015

The narrow, compact N800 Series reels are ideal for fuel dispensing, waste/oil evacuation, air and water operations. A declutching arbor and non-sparking ratchet assembly prevents damage when rev...

Hannay Reels N500 Series Provides Efficient Handling

by TechShop Staff Writers - 11-26-2014

Hannay Reels N500 Series high-pressure, low-maintenance spring rewind reel is designed for efficient hose handling in applications such as hydraulics, air/water, and chassis grease for all machine and...

Recent News


Hansen Global, Inc.

251 Taylor St.
Two Rivers WI 54241
United States
Phone: 920-793-5213
Contact: Julie Thiebar http://www.hansenglobalinc.com
Categories: Tools Bins & Organizers

Recent Products

Recent News


Harbor Freight Tools

3491 Mission Oaks Blvd.
Camarillo CA 93012
United States
Phone: 800-423-2567
Contact: John Batten http://www.harborfreight.com
Categories: Basic Mechanic Tools, Cordless Tools, Diagnostic Testing Equipment & Tools / Scan Tools, Electrical System Test Equipment, Hand Tools, Jacks & Hydraulics, Power Tools and Accessories, Shop Equipment, Specialty Tools, Tool & Shop Storage, Vehicle System Tools & Equipment

Recent Products

Zurich Automotive Code Readers Provide Professional Diagnostics for the Master Technician

by TechShop Staff Writers - 02-19-2018

The Zurich OBD2 Code Readers provide precise measurements and readings, making complex vehicle diagnostic systems easy to understand and fix. All Zurich readers diagnose and clear trouble codes an...

Recent News


Hecat, Inc.

5135 Aubrey Drive
Cumming GA 30028
United States
Phone: 800-380-9501Phone: 770-205-5600Fax: 770-205-5633

Heck Industries

P.O. Box 425
Hartland MI 48353
Phone: 800-886-5418Phone: 810-632-5400Fax: 810-632-6640
Categories: Collision Industry Segment, Paint & Body Shop Tools

Recent Products

Heck Industries Offers Turbo Deburring Tool

by TechShop Staff Writers - 02-27-2015

Heck Industries has introduced its newest deburring/chamfering tool, the “Turbo-Burr." The new Turbo-Burr is now 20% lighter and weighs only 3 pounds while offering all the same features and be...

Recent News


Hella Gutmann Solutions

201 Kelly Drive
Peachtree City GA 30269
Phone: 877-224-3552Fax: 800-631-7575
Categories: Diagnostic Testing Equipment & Tools / Scan Tools

Recent Products

Hella Gutmann's mega macs 56 Minimizes Troubleshooting Time on European Cars

by TechShop Staff Writers - 12-06-2016

The new mega macs 56 by Hella Gutmann Solutions offers state-of-the-art technology and allows wireless connection to cloud-based databases with technical information. By setting a hotspot, the ...

Recent News


Hella Inc.

201 Kelly Dr.
Peachtree City GA 30269
United States
Phone: 770-631-7500Fax: 770-631-7575
Contact: Martin Ngwenya http://www.hellausa.com
Categories: Diagnostic Testing Equipment & Tools / Scan Tools, Vehicle System Tools & Equipment

Recent Products

Optilux Remote Controlled Worklight Delivers Powerful LED Lighting at Push of a Button

by TechShop Staff Writers - 06-09-2016

HELLA, Inc. has introduced its newest addition to the Optilux Range, the Optilux RC360 LED Worklight. Using innovative electronics and high performance LEDs, HELLA has created a remote-controlled ...

Hella Gutmann Solutions Offers mega macs 66 Diagnostic Tool

by TechShop Staff Writers - 10-07-2014

The mega macs 66 represents the latest advance in scan tool technology from Hella Gutmann Solutions (HGS), a joint venture between HELLA, a world leader in automotive lighting and electronics technolo...

Recent News


Hennessy Industries Inc.

1601 JP Hennessy Dr.
LaVergne TN 37086
United States
Phone: 615-641-7533Phone: 800-688-6496Fax: 615-641-5104
Contact: Kevin Keefe http://www.ammcoats.com
Categories: TPMS / Tire / Wheel Service Equipment & Tools, Vehicle System Tools & Equipment

Recent Products

New Coats Brand Lift Line Introduced by Hennessy Industries

by TechShop Staff Writers - 04-17-2018

Hennessy Industries’ Coats brand is offering a comprehensive automotive lift line, which ranges from commercial light- and medium-duty lifts, all the way to heavy-duty and mobile columns in more...

Coats GTS Series Tire Changers Feature Tiltback Design

by TechShop Staff Writers - 08-31-2017

Coats reliability and durability meets tilt-back in the Coats GTS Series tire changers. All GTS Series models can service tires from 6” to 24” in diameter. The two-speed electric motor prov...

Coats Offers RC-55 Rim Clamp Tire Changers

by TechShop Staff Writers - 02-10-2017

The Coats RC Series Rim Clamp tire changers are built for today's high-speed, general service repair shops, says the company. Building upon the standards of the legendary Coats Rim Clamp tire chan...

Service Steel & Alloy Wheels with BaseLine Tire Changer

by TechShop Staff Writers - 03-14-2016

The BaseLine tire changer models from Hennessy Industries, designed for general service, are a great place to start a tire-service business. These entry-level machines will service the majority of OE ...

Lift Heavy Tires Easily With Coats System

by TechShop Staff Writers - 06-24-2015

The Coats Point Of Use Lift System helps you elevate heavy tire and wheel assemblies up to tabletop height with minimal effort. The lift system reduces operator fatigue and the potential for expens...

Recent News


Herkules Equipment Corp.

2760 Ridgeway Ct.
Walled Lake MI 48390
United States
Phone: 248-960-7100Fax: 248-960-7109
Contact: Kevin Prost http://www.herkules.us
Categories: Body Shop Equipment, Lifts, Machines -- Other

Recent Products

Two New Lifts Added to Herkules BossLifts Line

by TechShop Staff Writers - 03-23-2016

Herkules Equipment Corporation has two new vehicle lifts joining the company’s BossLifts line this spring. The BossLift VLA06 provides pneumatic lifting power, while the BossLift VLH01 is the low-pr...

Recent News


Hickok/Waekon Industries

10514 Dupont Ave
Cleveland OH 44108
Phone: 216-541-8060Fax: 216-761-9879
Categories: Brake Service Equipment, Electrical System Test Equipment, Engine & Fuel System

Recent Products

Hickok Waekon Makes Waveform Viewing Easy

by TechShop Staff Writers - 05-29-2018

Technicians now have the ability to easily view sensitive computer signals that scan tools can’t with a portable, easy-to-use tool. The 75200 Auto Wave II is an auto-setting waveform viewer with...

Hickok/Waekon I/M Fuel Cap Pressure Tester Kit

by TechShop Staff Writers - 05-01-2018

Under I/M standards, a failed cap can cause the vehicle to fail an emissions test but not cause the Check Engine light to come on. A cap will fail if the leak size exceeds .004” hole = 60cc/mi...

Hickok/Waekon Tool Provides High Performance Pressure Measurements on Your PC

by TechShop Staff Writers - 12-22-2016

Because accurate pressure measurements are more critical now than ever, Hickok/Waekon offers it 48265 Pressure Pro PC and 48365 Pressure Pro PC 5000. Increase your diagnostic accuracy by viewing li...

Recent News


Hobart Brothers

101 Trade Square East
Troy OH 45373
Phone: 800-424-1543Fax: 937-332-5224
Categories: Shop Equipment, Welding

Recent Products

Recent News


Hobart Welding Products

PO Box 100
Lithonia GA 30058
United States
Phone: 877-462-2781Fax: 920-735-4028
Categories: Welding

Recent Products

Recent News


Homak Manufacturing

1605 Old Route 18, Suite 4-36
Wampum PA 16157
Phone: 800-874-6625Fax: 724-535-1081
Categories: Tool & Shop Storage, Tools Bins & Organizers

Recent Products

Homak Service Cart for Technicians

by TechShop Staff Writers - 03-15-2018

  Homak Pro Series Service Carts keep your tools where you need them, with multiple drawer options available. The carts offer a variety of features including an HMC High Security Tubula...

5 Sizes Available for Homak RS Pro Tool Storage

by TechShop Staff Writers - 08-15-2017

Available in 27”, 36”, 41”, 54” and 72”, the Homak RS Pro is the next generation of quality tool storage offered by Homak. Its features include: PVC drawer liners; ball bearin...

Homak Offers 27" and 41" Pro Series Tool Storage Combo

by TechShop Staff Writers - 03-17-2017

Keep your tools within reach with Homak Manufacturing’s Pro Series 27” and 41” chest and roller cabinet combinations in black, red or blue. These combos feature the HMC High Security Tubula...

15-Piece Stubby Wrench Set from Homak

by TechShop Staff Writers - 06-30-2016

Homak Mfg. offers this 15-piece Stubby Wrench Set (HT06800150), which includes compact, adjustable stubby wrenches with a two-tone handle and 8" head. The wrenches are made from heat-treated ch...

Homak Offers 41” Tool Storage Combo

by TechShop Staff Writers - 04-27-2016

Keep your tools within reach with Homak Manufacturing’s RS Series offers 41” chest and roller cabinet combinations in black, yellow, blue, green and orange. Each drawer holds up to 88 lbs. T...

Homak Offers 34" Pro Series Three-Drawer Service Cart

by TechShop Staff Writers - 03-15-2016

This Homak 3-Drawer Industrial Service Cart provides exceptional durability, mobility and organization. It features the HMC High Security Tubular Locking System, which keeps contents secure, full e...

Homak Has Serious Tool Storage Covered

by TechShop Staff Writers - 07-01-2015

Homak has introduced its new 35" seven-drawer Service Cart. It has plenty of storage for all your tools and is offered in three unique, high-gloss finishes. Featuring full-extension gas struts i...

Homak Offers Its 7-Drawer Side Cabinet

by TechShop Staff Writers - 07-29-2014

Homak Manufacturing offers its 41” Pro Series 7-Drawer Side Cabinet (08041071). Its ­features include a 3.2 mil epoxy-polyester powder-coat paint finish, a HMC high-security tubular locking syst...

Recent News

HOMAK Offers Tough, Reliable, Professional Service Carts

by TechShop Staff Writers - 06-13-2013

HOMAK’s line of high-quality professional service carts feature ball-bearing drawer glides, full-length aluminum pulls and plenty of storage space for all of your tools. Choose between sliding top p...



3647 Standish Ave.
Santa Rosa CA 95407
United States
Phone: 707-585-0100
Categories: Pressure Washers

Recent Products

Recent News



3647 Standish Ave.
Santa Rosa CA 95407
United States
Categories: TPMS / Tire / Wheel Service Equipment & Tools

Recent Products

TPMS Service On Your Smartphone or Tablet Available from Huf

by TechShop Staff Writers - 11-07-2016

The aftermarket division of Huf North America Automotive launched its new solution for servicing TPMS during the SEMA show this year – the Huf Intellisens app. With the use of either a smartp...

Huf Expands Coverage For Intellisens Universal Sensors

by TechShop Staff Writers - 09-09-2016

Huf North America Automotive has launched its Intellisens universal sensors with expanded coverage. With only a few parts, Intellisens sensors now provide expanded coverage while also being fast to pr...

Huf Announces Startup Promotion With VT56 TPMS Tool

by TechShop Staff Writers - 12-14-2015

Huf North America Automotive has announced the release of the company’s new Huf startup promotion kit ISB006, which includes one VT56 tool and 48 Intellisens universal sensors. “Servicing TPMS...

Advanced TPMS Diagnostic Tool Launched by Huf

by TechShop Staff Writers - 10-14-2014

Huf Group has launched a Huf-branded VT56 tool, powered by ATEQ. Huf and ATEQ collaborated to design this fully updatable tool, the first to launch with a reinvented workflow, offering technicians...

Recent News


Hunter Engineering Company

Hunter Engineering logo
11250 Hunter Drive
Bridgeton MO 63044
United States
Phone: 314-731-3020Fax: 314-731-1776
Contact: Robert Brucehttp://www.hunter.com
Categories: Alignment Racks, Brake Service Equipment, Lifts, Shop Equipment, TPMS / Tire / Wheel Service Equipment & Tools, Vehicle System Tools & Equipment

Recent Products

Hunter Engineering Releases Harsh-Duty Option for Standard RX Lift Racks

by TechShop Staff Writers - 06-17-2019

Hunter Engineering has released an optional harsh-duty variation for its standard RX scissor lift racks. First in the industry to introduce powder-coating on runway-style lift racks, Hunter no...

Hunter Engineering Announces Inspection Integration with Dealer-FX

by TechShop Staff Writers - 05-29-2019

Hunter Engineering has announced a new integration partnership with Dealer-FX and its ONE Platform service experience. A service dashboard that provides control over dealership workflow and creat...

Hunter Engineering's Tool Brings In More Revenue by Reporting Alignment Machine Utilization

by TechShop Staff Writers - 03-12-2019

Hunter’s Push Reports are available for shops with Hunter’s HawkEye Elite alignment machine. Push Reports have proven to increase shop productivity and performance by providing managers with ...

Hunter Engineering to Showcase Quick Tread Edge at NADA Show

by TechShop Staff Writers - 01-23-2019

Hunter Engineering will showcase its next-generation drive over tire tread depth measuring tool, Quick Tread Edge, at the 2019 NADA Show, Jan. 25 – 27 (Booth No. 4605N) in San Francisco, CA. ...

Hunter Engineering Releases Performance-Driven Tool for Inspection Equipment

by TechShop Staff Writers - 01-09-2019

Hunter Engineering’s new performance-driven tool, Push Reports, is now available for shops with Hunter inspection equipment. Push Reports boost shop performance by automatically providing manage...

Hunter Engineering Launches Public Merchandise Shop

by TechShop Staff Writers - 12-18-2018

Hunter Engineering has launched a new merchandise website through hunter.com for anyone who would like to purchase Hunter promotional and merchandise products, such as hats, apparel, die cast mode...

Hunter Engineering SmartWeight Pro Offers Premium Features

by TechShop Staff Writers - 12-11-2018

Hunter Engineering Company's SmartWeight Pro is latest intuitive, mid-range wheel balancer that offers upscale, premium features. The wheel balancer is equipped with a no-touch wheel measureme...

Hunter Engineering Introduces Quick Tread Edge at SEMA

by TechShop Staff Writers - 10-30-2018

Hunter Engineering Company will showcase its next-generation drive over tire tread depth measuring tool, Quick Tread Edge, at the 2018 SEMA Show on Oct. 30 – Nov. 2 (South Hall, Booth 41013). ...

Hunter Engineering to Showcase Touchless Inspection Technology at SEMA

by TechShop Staff Writers - 10-30-2018

Hunter Engineering Company will showcase its new unmanned alignment inspection system, Quick Check Drive at the 2018 SEMA Show on Oct. 30 – Nov. 2 (South Hall, Booth 41013). Released in July ...

Hunter Engineering Launches 2 Center-Clamp Tire Changer Models

by TechShop Staff Writers - 08-16-2018

Hunter Engineering Company has launched its latest family of center-clamp tire changer models, the TC37 and TC39. Both models offer immense features and value in the growing segment of mid-rang...

Hunter Engineering Launches Quick Check Drive — a Touchless Alignment Inspection System

by TechShop Staff Writers - 07-18-2018

https://www.youtube.com/watch?v=d4HeoAwSRNM Hunter Engineering Co. launched its latest vehicle service innovation, Quick Check Drive – a touchless alignment inspection system that provides insta...

Hunter Engineering Introduces Quickgrip Adaptors for Fast Alignment

by TechShop Staff Writers - 05-14-2018

Hunter introduced the WinAlign HD QuickGrip adaptors that provide faster installation to speed alignment service and prevent rim damage with no metal-to-metal contact. With the WinAlign and QuickG...

Hunter Introduces New Low-profile, High-capacity Lift Rack

by TechShop Staff Writers - 04-20-2018

Hunter's new RX14 Scissor Lift provides massive capacity with a small footprint. The RX14 Fully Integrated Alignment speeds alignment service by 60 percent with synchronized aligner and lift ra...

Hunter's Revolution Tire Changer Offers Autonomous Operation

by TechShop Staff Writers - 04-18-2018

The Revolution tire changer with WalkAway capability from Hunter Engineering features 80 seconds of autonomous bead breaking and demounting that can be performed without an operator present. Th...

Hunter Engineering Presents Tire Changer T.K.O. Video Series

by TechShop Staff Writers - 03-15-2018

See the TCX Table-Top Tire Changer series in action in this informative new video series. Hunter's tire changer scientists conducted a series of comparison tests to demonstrate the mass, power, spee...

Hunter Releases Educational Video to Answer the Question: Why Do Cars Need Wheel Alignment?

by TechShop Staff Writers - 02-07-2018

Hunter has released an educational video to answer the common question: "Why do cars need wheel alignment?" to explain the purpose and function of wheel alignment procedures and the importance of pr...

Hunter Road Force Elite Balancer Update 4.0 Released

by TechShop Staff Writers - 11-29-2017

Miscentering during wheel balancing is a major cause of improper balancing and customer comebacks. Hunter’s Road Force Elite features Automatic CenteringCheck technology with new 4.0 software th...

Hunter's Revolution Tire Changer's WalkAway Capability Reduces Tire Changing and Balancing Times

by TechShop Staff Writers - 11-06-2017

The Revolution tire changer with WalkAway capability features 80 seconds of autonomous bead breaking and demounting that can be performed without an operator present. The Revolution allows the operato...

Hunter Releases Next-Generation WinAlign Consoles

by TechShop Staff Writers - 08-28-2017

Hunter introduces the next generation of WinAlign consoles, WA500 and WA600. The new consoles feature Hunter’s new HW2 PC running Windows 10 and WinAlign 15.1 software. The HawkEye Elite aligner ...

Hunter Releases New Quick Tread Console for Automatic Inspection Technology

by TechShop Staff Writers - 08-16-2017

Hunter’s Quick Tread inspection technology automatically measures tire tread depth and captures vehicle identification in seconds as motorists drive into the service lane. The new, compact console p...

Hunter Quick ID Vehicle Identification Technology Accelerates Inspection Times

by TechShop Staff Writers - 06-13-2017

Technicians can accelerate Hunter vehicle inspections with Quick ID. The new technology automates vehicle identification, saving valuable time and labor. Quick ID instantly identifies the vehic...

Time-Saving and Ease-of-Use Accessories Included with Hunter TCX625 Plus HD Tire Changer

by TechShop Staff Writers - 05-26-2017

Hunter’s TCX625 Plus HD combines compact size with a unique mount/demount roller mechanism to provide high performance servicing of heavy-duty, over-the-road truck assemblies and includes severa...

Hunter Engineering Offers Compact Inspection Lane Footprint Option

by TechShop Staff Writers - 04-26-2017

The Quick Check inspection lane and Quick Tread drive-over tread depth system from Hunter Engineering Company now feature a 25% smaller footprint option. Now customers with tighter space requir...

Hunter Releases New Mount Head for Table-Top Tire Changers

by TechShop Staff Writers - 01-03-2017

Hunter’s new plastic mount head for tabletop tire changers is optimized for today’s wheels. Raised spoke wheels and clad wheels that can challenge other mount heads are simple for Hunter’...

Hunter Engineering’s Updated Tire Changer Features Enhanced Split-Bead Roller System

by TechShop Staff Writers - 12-05-2016

Updates to Hunter Engineering Company's TC3700 tire changer enhance ease-of-use with a new bead roller positioning system, says the company. The new controls allow the operator to easily pre-posit...

Hunter Engineering Releases New AutoComp Elite Brake Lathe

by TechShop Staff Writers - 11-16-2016

Hunter has released the new AutoComp Elite brake lathe featuring automatic compensation technology. The patent-pending AutoComp compensation system directly determines the position of the internal...

Perform Alignment Checks with Proper Tire Pressure on Hunter Engineering's Inflation Station

by TechShop Staff Writers - 10-25-2016

Hunter Engineering Co. has launched a new Inflation Station that is compatible with its Quick Check system. The station may also be installed as an independent system, the company said. The Inf...

Hunter Quick Tread Adds Enhanced Flush Mount Design

by TechShop Staff Writers - 10-10-2016

Hunter Engineering Co.’s Quick Tread system is now available in a new flush mount design. According to Hunter, the new design eliminates obstructions or obstacles in the inspection lane and h...

Hunter HD PowerSlide Turnplates Available In Flush Mount Configuration

by TechShop Staff Writers - 06-22-2016

Hunter Engineering’s WinAlign HD alignment system now offers PowerSlide turnplates in a flush mount configuration as a component of Fully Integrated Alignment (FIA). New flush mount PowerSlide ...

Hunter's Road Force Elite Features Patented Vision System

by TechShop Staff Writers - 04-28-2016

The new Road Force Elite is Hunter’s fastest diagnostic wheel balancer and performs both a traditional balance and Road Force Measurement in less time than it takes to complete a conventional balanc...

Updates to Hunter's TCX625 Heavy-Duty Tire Changer Reduce Service Speeds

by TechShop Staff Writers - 02-23-2016

The updated TCX625HD from Hunter Engineering features a drop down inner roller to reduce service time by 25% and increase ease-of-use. The pedal-controlled inner roller saves the operator time and ...

Hunter's Quick Check Now Includes Heavy-Duty Battery Clamps

by TechShop Staff Writers - 02-03-2016

Hunter’s battery tester now offers optional heavy-duty clamps. These new battery clamps were designed with increased strength and durability, to hold-up in today’s tough shop environment. H...

Hunter Engineering Showcases New Aligner Console Handheld Remote With Enhanced Features

by TechShop Staff Writers - 01-06-2016

At SEMA 2015, Hunter previewed its enhanced aligner console handheld remote, which features an integrated flashlight and numeric keypad to increase functionality. Handheld remote improvements allow...

Hunter WinAlign Consoles Now Controlled From Any Mobile Device

by TechShop Staff Writers - 12-08-2015

  Hunter’s WinAlign consoles can now be viewed and operated remotely from any mobile device, making the aligner console more convenient and flexible than ever. Using the Splashtop rem...

Hunter’s New Auto34S Features Slim Design, Enhanced Controls

by TechShop Staff Writers - 11-16-2015

Hunter’s new Auto34S features a space saving, functional design that makes this powerful tire changer even easier to use. The ergonomic Auto34S features an air powered, push-button control that o...

Hunter’s Updated Revolution Tire Changer Features Smaller Footprint, Expanded Capabilities

by TechShop Staff Writers - 11-03-2015

  New updates to the Revolution, Hunter’s fully automatic tire changer, have reduced the unit’s footprint by 25% and enhanced ease-of-use. The Revolution’s updated console is now inte...

Extra-Wide Runways Featured On Hunter’s Four-Post Lift

by TechShop Staff Writers - 10-13-2015

Hunter’s L451 four-post lift now features extra-wide 26” runways. The new generation four-post lift family is available in long or standard runway length and open- or closed-front configurations. ...

Hunter’s QuickComp Lathe's Computerized Compensation Adjusts For Lateral Runout

by TechShop Staff Writers - 09-17-2015

Hunter Engineering Company’s QuickComp lathe features a two-way adjustable compensation adaptor that works with Hunter’s patented ProComp computerized compensation to adjust for lateral runout of ...

Hunter’s Quick Tread Now Available In Flush Mount Configuration

by TechShop Staff Writers - 09-08-2015

First previewed for customers at NADA 2015, Hunter Engineering Company announce the Quick Tread drive-over tread depth unit is now available in a flush mount configuration. The flush mount system feat...

Hunter Offers Leverless, Center-Clamp Tire Changer

by TechShop Staff Writers - 06-22-2015

Hunter Engineering Company has introduced the TC3900 tire changer, a high-performance center-clamp tire changer with a bead press arm to assist in mounting difficult assemblies. The TC3900 also fea...

New Enhancements Made to Hunter's Tire Changer

by TechShop Staff Writers - 05-21-2015

Hunter Engineering’s popular TC3700 model center-clamp tire changer has been upgraded to handle today’s tires and wheels even better. A new split roller, bottom bead demount system assists demo...

Hunter Offers New Generation Advanced Tabletop Tire Changers

by TechShop Staff Writers - 05-05-2015

New generation TCX57 tabletop tire changers from Hunter Engineering include several enhanced features for tremendous power and control, according to the company. Building on the TCX575 family, the ...

Faster and Easier Caster Measurements with Hunter’s new WinAlign 14.3 Software

by TechShop Staff Writers - 02-13-2015

Hunter’s new WinAlign 14.3 software reduces the number of steers required to obtain caster measurements, increasing the efficiency and speed of the alignment procedure. Rather than installing the...

Hunter’s Quick Tread Produces Fast, Accurate Tread Depth Readings

by TechShop Staff Writers - 11-25-2014

Hunter Engineering Company announces its new Quick Tread drive-over tread depth system, which uses point cloud technology to automatically measure the tread depth of each tire without a time loss....

New Foot-Pedal-Operated Wheel Lift for Fast and Accurate Wheel Placement

by TechShop Staff Writers - 11-05-2014

Hunter’s new style wheel lift, which is an optional feature on all Hunter wheel balancers, is now operated by a foot pedal, allowing the operator to lift and lower the tire hands free. New wheel ...

Hunter Debuts New HawkEye Elite Alignment

by TechShop Staff Writers - 03-08-2011

Hunter’s HawkEye Elite systems bring Hunter customers unprecedented productivity and other profitable advantages. New and patented QuickGrip adaptors and three-dimensional targets accelerate serv...

Recent News

Hunter Engineering is Now Shipping Quick Tread Edge with Release of WinAlign 16.1

by TechShop Staff Writers - 08-27-2019

Hunter Engineering’s next-generation drive-over tread depth measuring tool, Quick Tread Edge, is now available for order. This announcement comes with Hunter’s latest release of WinAlign 16.1...

Hunter Engineering Releases Difficult Tire and Wheel Fitment Data Trends

by TechShop Staff Writers - 02-28-2019

Hunter Engineering has released data illustrating difficult tire and wheel fitment trends. This data shows a significant shift in growth of difficult tire and wheel assembly fitments throughout th...

Hunter Engineering Now Provides Online Safety System Alignment Information

by TechShop Staff Writers - 02-22-2019

Hunter Engineering Company now provides online safety system alignment information in Hunter’s online business intelligence tool, HunterNet. Safety system reset (or safety system alignment) ...

Hunter Engineering Enhances Connected Equipment Capabilities

by TechShop Staff Writers - 10-09-2018

Hunter Engineering Co. has announced advancements to its online business intelligence tool, HunterNet. First introduced in 2002, HunterNet provides real-time data to shops through equipment re...

Hunter Engineering, AutoVitals Announce New Inspection Integration

by TechShop Staff Writers - 10-02-2018

Hunter Engineering Company and AutoVitals announced a new integration with their vehicle inspection technology. The joint integration empowers service providers to quickly present inspection findi...

Hunter Announces Integration of FrogData Action Analytics to Quick Check Inspection System

by TechShop Staff Writers - 03-21-2018

Hunter Engineering Co. has announced the integration of FrogData Action Analytics into the Quick Check inspection system. According to the company, the new system will help shops to maximize serv...

Hunter Engineering Featured on Performance TV and Velocity

by TechShop Staff Writers - 01-24-2018

  Hunter Engineering is being featured by Masters Entertainment: Perfomance TV and Brenton Productions: Velocity through February 2018. Hunter Engineering showcased 20 new and enhanced product...

Hunter Releases Revolution with WalkAway Operation Video

by TechShop Staff Writers - 12-28-2017

See the Revolution tire changer with WalkAway operation in action with a new video that features autonomous bead breaking and demounting that can be performed without an operator present. Click...

Hunter Engineering Offers Online Self-Study Program

by TechShop Staff Writers - 08-02-2017

Hunter Engineering is now offering Hunter University, a free, comprehensive online self-study program for technicians and industry professionals. “This educational tool is an easy and effecti...

Hunter Engineering Launches Completely Redesigned Hunter.com

by TechShop Staff Writers - 07-10-2017

Hunter Engineering has launched a completely redesigned Hunter.com. The new site places even better emphasis on Hunter’s local teams and industry leading products, says the company. One click...

Hunter Quick Tread Console Measures Tire Tread Depth in Seconds

by TechShop Staff Writers - 06-27-2017

Hunter Engineering Co. has released a new console for its Quick Tread inspection technology that automatically measures tire tread depth and captures vehicle identification in seconds. The new, com...

Hunter’s Quick Check and Quick Tread Integrate with BOLT ON TECHNOLOGY

by TechShop Staff Writers - 03-08-2017

Hunter Quick Check and Quick Tread inspection systems now feature integration with Mobile Manager Pro by BOLT ON TECHNOLOGY, a digital multi-point inspection tool featuring color-coded results and...

Hunter Engineering Showcases WinAlign 15.0 Software

by TechShop Staff Writers - 01-30-2017

Hunter Engineering has introduced WinAlign version 15.0, which has many enhancements including support for Safety System Alignment and Quick ID. In addition to a mechanical alignment, manufactu...

Provide Customers with a Diagnostic Health Report from Hunter and Identifix

by TechShop Staff Writers - 12-20-2016

    Hunter Engineering’s Quick Check inspection system is now enhanced with a state-of-the-art Diagnostic Health Report powered by Identifix. Quick Check, along with the Ident...

Hunter’s Quick Check and Quick Tread Fully Integrate with AutoServe1

by TechShop Staff Writers - 12-09-2016

Hunter Engineering’s Quick Check and Quick Tread systems now fully integrate with the AutoServe1 complete vehicle inspection and customer communication system. This allows shops to immediatel...

Hunter Kicks Off Social Media Contest

by TechShop Staff Writers - 08-11-2016

Hunter Engineering is giving away trips to the 2016 SEMA Show as well as the chance to win a SmartWeight Touch wheel balancer as part of a social media contest. Shop owners can enter the contest by...

Hunter Quick Check and Quick Tread Are Integration-Ready

by TechShop Staff Writers - 05-18-2016

  Hunter Engineering announces the Quick Check inspection system and Quick Tread tread depth measurement system are integration-ready. Quick Check instantly sends vehicle inspection data t...

Hunter Quick Check and Quick Tread Now Seamlessly Integrate with AutoPoint

by TechShop Staff Writers - 04-14-2016

Hunter Engineering’s Quick Check and Quick Tread now seamlessly integrate with Solera's AutoPoint. The Hunter inspection results are automatically paired with the complete electronic MultiPoint i...

Choose the Right Tire Changer for Your Shop with Hunter's Decision Guide

by TechShop Staff Writers - 03-11-2016

Hunter has released a new Tire Changer Decision Guide to highlight the benefits and features of different tire changer models. It is important for shops to find a tire changer that is a good match for...

Hunter's Social Media Contest Includes Trips to SEMA 2015

by TechShop Staff Writers - 08-04-2015

Hunter Engineering has launched a new, two-part social media contest that offers trips to SEMA 2015 and the chance to win a free SmartWeight Touch wheel balancer at the show. Before SEMA, two shops...

Hunter’s HawkEye Elite Alignment System Approved by Mercedes-Benz

by TechShop Staff Writers - 03-18-2015

Mercedes-Benz has approved Hunter’s HawkEye Elite alignment system for use in their workshops worldwide. HawkEye Elite uses four precision cameras to measure the position and orientation of targe...

Hunter Releases New Technical and Training-Specific Channel on YouTube

by TechShop Staff Writers - 01-27-2015

Hunter Engineering Company has launched a new technical and training channel on YouTube, called the Hunter Learning Channel. The Hunter Learning Channel features extensive training video playlists ...


Hutchins Manufacturing Company

49 N. Lotus Ave.
Pasadena CA 91107
Phone: 800-247-3199Fax: 626-993-3998
Categories: Collision Industry Segment, Paint & Body Shop Tools

Recent Products

Hutchins Sander Removes 25% Faster

by TechShop Staff Writers - 05-02-2019

The Hutchins ProFinisher 700 sander is the most aggressive sander yet from Hutchins. Its 5/16 in. (8 mm) offset offers 25% faster material removal than the Model 600. It is the ultimate tool for...

Recent News


Huth / Ben Pearson

260 Grant Street? P.O. Box 270467
Hartford WI 53027
United States
Phone: 800-558-7808Fax: 262-673-9443
Categories: Machines -- Other, Shop Equipment

Recent Products

Recent News