Casite Offers Lubri-Gas Upper Cylinder Lubricant and Fuel Injector Cleaner

Casite Offers Lubri-Gas Upper Cylinder Lubricant and Fuel Injector Cleaner

The special formula improves fuel economy up to 15%, restores lost power, and improves acceleration and combustion.

Lubri-Gas is formulated for use in all gasoline engines. By providing full-time lubrication to fuel system components, top cylinders, rings and valves, the formula reduces friction heat and wear that robs vehicles of power and performance.


Using Lubri-Gas will regularly clean and prevent deposits on fuel injectors, prevent varnish buildup in the entire fuel system, which also helps improve your fuel efficiency, and reduce a vehicle’s oil consumption. 


Available in 6-oz. and 32-oz. bottles.

For more information, visit www.casite.com.

You May Also Like

CTA Tools Debuts Chrysler Cam Phaser Master Set – VVT & VVL

Applications included are for 2011-2022 Chrysler, Dodge & Jeep models.

The Master set includes: #5000 - Cam Phaser & Timing Chain Locking/Holding Set – VVT. #3925 - Cam Phaser Holding Set - Left/Front & Right/Rear – VVL. Cam Phaser & Timing Chain Locking / Holding kit for 3.0L, 3.2L, 3.6L VVT & VVL Pentastar engines. Includes 2 camshaft phaser holders, 5 timing chain holders & L-pin.

Mayhew Introduces New 14-Piece Micro Hand Tool Set

This new set is a compilation of all the current micro line products from Mayhew; including pry bars, picks, hooks and screwdrivers.

Victor Reinz Reinzosil Sealant Added to Spicer CV Service Kits

Victor Reinz Reinzosil vulcanizing silicone boosts resistance to various fluids, making it sensor-safe for a wide range of applications.

Gray Tools Introduces Insulated Hex Bit Socket Set

The insulated tool sets are backed by a limited lifetime warranty.

Snap-on Debuts New General Service Set 

The company says technicians now have maximized tool concentration in the smallest footprint.

Other Posts

Chevron Introduces New Rykon Formula to Grease Product Line

The new calcium sulfonate complex-based grease is designed for heavy-duty and extreme pressure applications.

New Small Stud Extractor Now Available from Mayhew Tools

This new stud extractor, 1/4″ drive, allows for stud and bolt removal from tighter spaces with a wide option of driver abilities for job versatility.

6250 1⁄4” Mini Rt. Angle Die Grinder

The low weight ultra-compact design provides added control and maneuverability.

BendPak to Debut Eight-Armed Car Lift Concept at NADA

Octa-Flex improves technician productivity, convenience and ergonomics, according to BendPak.