Clore Jump-N-Carry 12V Lithium Jump Starter/Power Supply

Clore Jump-N-Carry 12V Lithium Jump Starter/Power Supply

The JNC345 can also be used as a memory saver when changing out a vehicle's battery.

Clore Automotive introduces the new Model No. JNC345, 12 Volt Jump Starter and Power Supply, from Jump-N-Carry. The JNC345 combines robust jump-starting power with numerous features that deliver utility and convenience, including high performance starting capability, USB outlets to power small electronics, 12-volt power supply capability, an LED work light and UL2743 compliance for operator and equipment safety.

With 550 start assist amps of starting power, the JNC345 can tackle a wide variety of starting tasks in numerous application environments, including automotive, marine, light truck, agricultural and fleet starting. It can start up to 10L gasoline engines and up to 10L diesel engines. It incorporates numerous features to make jump starting safer for the operator and vehicle being serviced, including reverse polarity protection, backfeed protection, over-voltage protection, short circuit protection and overheat protection.

The JNC345 adds several convenience features to extend its capabilities. It features two USB outlets to power cell phones, tablets and other small electronics. Also included is a 12-volt female adapter, allowing the JNC345 to power accessories from its 10A DC output port or be used as a memory saver when changing out a vehicle battery. It features a high intensity LED work light for use in nighttime starting or other emergency situations. Charging is easy with the included AC charger and a fast, automatic charging routine. The unit comes packaged in a convenient storage case for easy transport and storage.

More information can be found at https://cloreautomotive.com.

Clore Automotive
Phone: 800-328-2921Fax: 913-310-1075Contact: Jim O\'Hara

You May Also Like

Philips Xperion Work Lights Designed to Save Service Pros Time

The two-part magnetic handles make it easy to aim the light exactly where it’s needed.

Lumileds offers Philips Xperion 6000 LED Flood Lights, designed to help service technicians light up their work area faster and more precisely.

The Xperion 6000 LED Flood and Flood Mini feature pivoting handles with powerful magnets embedded in them, allowing users to mount the Xperion 6000 LED flood lights on most any metallic surface. In addition, the handles are formed from two halves that can be rotated apart to create hooks that can be used to hang the lights. These options make it easy for technicians to quickly aim the light where they need it to get their job done. Both the Flood Audio and Flood mini feature ABS rubber grip surfaces that maintain excellent grip even when covered with oil or grease.

Hunter Engineering Expands Wheelbase for Scissor Lifts

Extra length responds to growing industry needs.

Cementex Debuts New Arc Rated Face Shields

Updated face shield provide classic, reliable arc flash protection.

Hunter Engineering Introduces Hawkeye XL Alignment System

New aligner offers speed, versatility and ease of use, the company says.

Cool Boss Air Coolers Fill Shops with Chilled Air, Tunes

CB-28 and CB-36 evaporative coolers feature air ionizers, Bluetooth players, LED floodlights.

Other Posts

Tool Time Podcast: Clore Automotive

Jim O’Hara from Clore Automotive joins Nadine Battah and Eric Garbe.

TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool
Upgrade Your Air System: It’s Easier Than You Think

Improving your shop airflow is only a benefit, unless you like to spend more time, work harder and make less money.

air flow tubes