Communicating with Customers about Brake Pads

Communicating with Customers about Brake Pads

The common brake job is getting more difficult to sell every day. Every shop is confronted with competition offering brake jobs for lower prices. Also, vehicles and brake pads are becoming more advanced.

With these trends influencing the marketplace, how can a shop maximize and grow its revenue from the lowly pad replacement and turning rotors? Outside of increasing the number of brake jobs your shop performs, the best way to increase revenue and profit is to sell the best brake pads and accessories that can give the best profit margin and customer satisfaction.

This involves “up selling” the customer when it comes to brake pads. This is tough in a market that is dominated by the $99 brake job. But, the time invested in selling the customer on premium brake pads will always pay off in the end with a better educated customer and one that will be happier with the final results.

Following are the top 10 consumer questions concerning brake pads and the answers that can help you to up sell. These answers can save you from getting into hot water. The answers to these questions are written in language the customer can understand. A version will be available on www.brakeandfrontend.com

1. Aren’t all brake pads the same? Isn’t that why some shops are able to sell brake jobs for the same price?

No, almost every vehicle model has a different shape of brake pad. The friction materials that are on the pad are different because almost every vehicle has different requirements and performance capabilities.

2. Why do some pads cost more?

Buying a quality brake pad is like buying prescription medicine. When you are buying a prescription drug you are not just paying the cost to manufacture, package and market the pill. The bulk of what you are paying for is research and development. The same is true for brake pads.

Brake pads require a great deal of testing and engineering because they are made for a specific vehicle. A quality brake pad manufacturer will spend a lot of time and money on a developing a brake pad application for your vehicle. This includes simulated and on-the-vehicle testing. This type of testing is people and equipment intensive.

Another cost of brake pad manufacturing is quality control. Reputable manufacturers will pull random samples from the production line and perform destructive testing. This costs money and time and may mean that a batch of pads could be rejected.

3. Aren’t brake pad manufacturers just copying the original brake pad?

Can you make meatloaf or chocolate chip cookies exactly like your mother’s? probably not. Brake pads are one of the few components on a vehicle that can not be duplicated by just physical measurements and simple testing.

Carmakers do not say to replacement brake pad manufacturers, “Here is the recipe for our friction material for the 2006 models.” No, replacement brake pad manufacturers have to figure it out on their own and it is not easy or inexpensive.

But, here is the good news, as a vehicle gets older chances are the replacement brake pads will get better because the manufacturer will have more data in the form of real world miles.

4. A company would not sell an unsafe brake pad?

Not true, some inexpensive brake pad manufacturers are constantly playing the odds game by weighing profit against braking performance. Their pads may perform well during normal operating conditions like city and highway driving, but if the pads encounter a situation like a panic stop or steep hill decent, they could fail or have longer than normal stopping distances. This is because they might not have spent the money for testing or on quality raw materials. They are betting that you might not encounter extreme conditions. Would you really want to “call their bluff” when you have to go “all in” during a panic stop?

In the United States, there are no federally mandated laws that regulate the performance of replacement brake pads. The burden of selecting a safe replacement brake pad is up to the shop and driver.

5. What is in a box of brake pads?

The typical box of disc brake pads has four pads (two pads for each side of the car). Some manufacturers will included other pieces of hardware to make sure the pad performs to its full potential. The items include anti-rattle clips, shims to reduce noise and wear sensors. Also, some brake pad manufacturers include special lubricants to reduce the chance of the customer returning with a noise compliant.

Some low-quality brake pad manufacturers do not include these items in the box so they can maximize their profit and be the lowest-priced product on the store shelves.

6. It is an older car, I don’t need to spend a lot of money on brake pads.

Older cars still have to stop the same way a new car does under certain conditions. Accidents do not discriminate between how much a car is worth and neither do lawyers.

7. I want a pad that will last more miles. Can I get a set put on my car?

Brake pads are designed to wear out. How fast they wear is dependent on the driver and the vehicle more than the pad’s friction material formulation. While there are pads on the market that promise more miles, it is difficult to say if it will last longer than another pad.

What can make a brake pad last longer is replacing the hardware and resurfacing the rotor with the correct finish. These two items can increase the life of the brake pad more than any other factor.

8. Ceramic? Kevlar? Carbon Semi-metallic? Is it a brake pad or a golf club?

Like golf club manufacturers, brake pad manufacturers are always looking for new space age materials to improve their products. These materials names may be throw around like buzzwords in a boardroom, but knowing what these materials can do can help you to make a more informed decision.

Ceramic
When most consumers hear the word “ceramic” they conjure up images of dinner plates being ground up into brake pads. But, even though the materials share the same chemical structure and certain attributes, ceramic fibers in brake pads are some of the most advanced microstructures on the planet. Ceramic material’s structural properties are very stable under high temperatures, like Corning cookware. But this is where the comparison ends. Ceramic materials that go into a brake pad are very small strands that are engineered to be a certain length and width.

There are three advantages of ceramic pads in certain applications. First, since the ceramic materials offer stable performance under a wide range of temperatures, they can offer quiet performance. Second, ceramic brake pads manage heat in the rotor and caliper better on some vehicles than some non-ceramic applications. Third, ceramic brake dust does not show up on or stick to wheels like some other brake pad formulations. This could be am important factor if you have an expensive set of custom wheels.

Kevlar
If you were to hold Kevlar fibers in your hand, it would look like cotton candy. But this innocent looking material is stronger than steel and can stop a bullet, or keep your brake pads together under high temperature and pressure.

Like ceramic materials, it is used as a fiber in brake pads to give them structure. It is a very expensive material, but it can help extend the life of the brake pad.

Semi-Metallic
Semi-Metallic pads use metal fibers to give structure and provide friction. The metals used are typically high quality steel, copper and other exotic metals.

So what is the other part of the semi-metallic mix? It is be a variety of materials like glues, lubricants and structural fibers. The manufacturer will blend the components together to give the best performance for that application.

Confused? Don’t be. A shop can recommend a pad that fits your driving profile and vehicle with a few easy questions.

9. What is the best resource of information when selecting the right brake pad for my vehicle?

The best source of information on selecting a brake pad is not on the internet or in Consumer Reports magazine. The best source of information is a shop. A repair shop will buy more brake pads in two days than most people will buy in a lifetime.

With this experience, the person at the front counter can help you select the right brake pad for you and your vehicle. Brake pads are one item that most shops will not take a chance on because they have a vested interest in making your vehicle as safe as possible.

10. How do they keep the friction material on the metal backing plate?

The friction material is usually molded onto the backing plate using heat and pressure. In some cases, the friction material is forced through holes in the backing plate as it is molded. Also, the backing plate is coated with an adhesive that can withstand high temperatures. These two methods help to keep the friction material from shearing off the metal backing plate.

On some premium brake pads, the backing plate will have a mechanical method to secure the friction material to the backing plate. The systems can use small hooks or other attachment devices that become embedded into the molded friction material. This can give an extra sense of security to the driver.

You May Also Like

Impact Wrench Technology

Interchangeable anvils are a feature on some new impacts.

Technology is defined as the application of scientific knowledge for practical purposes, especially in industry. We often picture technology as something that has computers and electronics attached, and often it does. But, in the world of impacts, both in the realm of pneumatic and cordless, technology bears much deeper roots.

Brake Lathe Basics

Resurfacing drums and rotors is a machining process with its own specific guidelines.

Refrigerant Oil Has to Be Right

Oil type is just as important as oil capacity.

Three bottles of refrigerant oil
Top 5 Tools: Steve Coffell, Auto World, Hazelwood, MO

Steve Coffell, a technician at Auto World in Hazelwood, MO, says his Top 5 Favorite Tools are: Related Articles – Mayhew Introduces New 14-Piece Micro Hand Tool Set – New Small Stud Extractor Now Available from Mayhew Tools – Matco Debuts 5-Piece Purple Screwdriver Set   OTC Genisys Touch – Quick scan, bidirectional control Snap-on

Wheel Bearing Adjustment Tools & Equipment

A wheel bearing that’s out of adjustment can reduce bearing life and can affect more than just the bearing. It’s important to adjust the wheel bearing endplay to the proper specifications. If the bearing set is adjusted too loose or too tight, it can cause the bearing to fail prematurely. There are a few types of assemblies, so using correct procedures and tools will ensure a comeback-free wheel bearing installation.

Other Posts

Tools in the Eye of the Beholder

We’re here to help you see all the tools, so you can invest wisely.

Multimeter Accuracy: How Important Is It?

Multimeter accuracy is critical for EV diagnostics.

multimeter
More Than A Scan Tool

Scan tools serve as indispensable diagnostic hubs, offering access to a wealth of resources, from OEM technical bulletins to community-documented repairs.

scan tool
Battling Stress and Burnout

Here are some quick tips for managing stress and avoiding burnout in the fast-paced automotive repair industry.

Nadine Battah