Consider TPMS When Changing To Winter Tires

Consider TPMS When Changing To Winter Tires

The time to change to and from snow tires is both a regional and personal decision. Whenever it takes place, a changeover brings with it a need for consumers to make some decisions. To purchase or not purchase a second set of wheels needs to be followed with questions about TPMS sensors.

The time to change to and from snow tires is both a regional and personal decision. Whenever it takes place, a changeover brings with it a need for consumers to make some decisions. To purchase or not purchase a second set of wheels needs to be followed with questions about TPMS sensors.
 
Selling a second set of TPMS sensors can be very profitable. Also, there are several more options for sensors that were not available just a few years ago.  Also, performing changeovers can decrease the time for your return on investment for the equipment you have purchased to service TPMS equipment.  
 
Sean MacKinnon, TIA’s director of automotive training development, strongly recommends installing new sensors for the winter tire set.  However, if a decision is made to switch OE sensors to the aftermarket winter tire wheels, MacKinnon suggests installing a new TPMS service pack to ensure proper sensor operation and a tight air seal. “Exposure to road salt and other ice-melting chemicals takes its toll on TPMS components,” he says.
 
Of course, there are customers tempted to completely omit TPMS sensors, effectively disabling a safety feature of the vehicle. “Schrader would never recommend any consumer eliminating sensors,” Paul Wise, Schrader International’s director of product line management and marketing, emphatically states. “TPMS is a legislative-mandated, safety-enhancing, OE-based system that can save lives. It has multiple benefits, including safety, fuel savings and reduced environmental impact.”
 
He says TPMS should always be on a customer’s vehicle, regardless of if and when he or she changes over to winter tires for the winter driving season. “The accident and fatality statistics due to low tire pressure are significant and well-documented, and they need to be shared with drivers.”
 
MacKinnon says the practice of excluding TPMS sensors from a wheel assembly during a tire changeover could be construed as a direct violation of U.S. motor vehicle safety codes.
Changeover Challenges
There can be some difficulty with some vehicles when using the same sensors on summer and winter wheel assemblies. Wise cautions that a TPMS relearn procedure may be necessary if the same sensors are used for both tire sets, but their positions on the axles change.
 
As always, training for tire technicians is important. MacKinnon says TIA’s Certified Automotive Tire Service training program provides in-depth TPMS information, including sensor and service pack installation, relearn procedures, tools and troubleshooting.
 
“Using a handheld TPMS scan and programming tool, test each tire for sensor activity,” he explains. “Test results will indicate if any changes are needed to the customer’s setup of the winter tires. The technician can then inform the consumer of the proper service steps that can ensure a successful changeover.”
 
MacKinnon reminds shops that a TPMS relearn fee is becoming more common, especially if the customer has not made a major purchase at the service location.
 
At this time, it’s rare to find vehicles with on-board computers capable of tracking two different sets of tires’ TPMS information. The feature is found on several Toyota and Lexus SUVs and minivans, according to MacKinnon.
 
Some replacement sensors can be fitted with rubber snap-in valve stems that provide further protection against winter road salts and materials that normally corrode aluminum valve stems.
 
Of course, this time of year brings more glowing TPMS warning lights, as cold temperatures cause a drop in tire pressure. MacKinnon reminds technicians to check the spare tire since an increasing number of vehicles with full-size spares are equipped with a fifth TPMS sensor.
Back to Summer
Sooner or later, the threat of snow will end and the switch to summer tires will begin. The same changeover process will take place, including a costly swap of sensors if the customer opted for a single set. A system relearn may be required by the vehicle and the TPMS should be inspected for possible service, depending on what type of services take place during the seasonal exchange.
 
If a consumer refuses the TPMS service, many locations are opting to decline the business by not servicing the vehicle. Should a consumer choose to buy winter wheel-and-tire assemblies and the vehicle is TPMS-equipped, the service location should require the customer to implement TPMS for the winter tire set. 

You May Also Like

Impact Wrench Technology

Interchangeable anvils are a feature on some new impacts.

Technology is defined as the application of scientific knowledge for practical purposes, especially in industry. We often picture technology as something that has computers and electronics attached, and often it does. But, in the world of impacts, both in the realm of pneumatic and cordless, technology bears much deeper roots.

Brake Lathe Basics

Resurfacing drums and rotors is a machining process with its own specific guidelines.

Refrigerant Oil Has to Be Right

Oil type is just as important as oil capacity.

Three bottles of refrigerant oil
Top 5 Tools: Steve Coffell, Auto World, Hazelwood, MO

Steve Coffell, a technician at Auto World in Hazelwood, MO, says his Top 5 Favorite Tools are: Related Articles – Mayhew Introduces New 14-Piece Micro Hand Tool Set – New Small Stud Extractor Now Available from Mayhew Tools – Matco Debuts 5-Piece Purple Screwdriver Set   OTC Genisys Touch – Quick scan, bidirectional control Snap-on

Wheel Bearing Adjustment Tools & Equipment

A wheel bearing that’s out of adjustment can reduce bearing life and can affect more than just the bearing. It’s important to adjust the wheel bearing endplay to the proper specifications. If the bearing set is adjusted too loose or too tight, it can cause the bearing to fail prematurely. There are a few types of assemblies, so using correct procedures and tools will ensure a comeback-free wheel bearing installation.

Other Posts

TPMS Tools and Sensors

Transform TPMS with advanced diagnostics and sensor programming. This video is sponsored by Bosch.

Tools in the Eye of the Beholder

We’re here to help you see all the tools, so you can invest wisely.

Multimeter Accuracy: How Important Is It?

Multimeter accuracy is critical for EV diagnostics.

multimeter
More Than A Scan Tool

Scan tools serve as indispensable diagnostic hubs, offering access to a wealth of resources, from OEM technical bulletins to community-documented repairs.

scan tool