Customer States: Honda Soda Can Tab Fix

Customer States: Honda Soda Can Tab Fix

As I removed the timing belt and balance shaft belt, I noticed this soda can tab holding one of the crank sensors in place. Apparently, the customer knew of this from a year ago when the balance shaft belt broke but couldn’t afford the sensor or a new water pump.

 

“Customer came in with a 2007 Honda Civic with an intermittent no-start condition and leaking water pump. As I removed the timing belt and balance shaft belt, I noticed this soda can tab holding one of the crank sensors in place. Apparently, the customer knew of this from a year ago when the balance shaft belt broke but couldn’t afford the sensor or a new water pump. While the customer waited to have the recommended repairs, the leaking water pump washed the bearings of both the tensioner pulleys. After replacing the water pump, both belts, both tensioner pulleys and the broken crank sensor, the customer was happy to have his little Civic back on the road. He promised to not go the cheap route again.”  
 
Marty Tate
Tuffy Auto Service
Tallahassee, FL  

You May Also Like

Impact Wrench Technology

Interchangeable anvils are a feature on some new impacts.

Technology is defined as the application of scientific knowledge for practical purposes, especially in industry. We often picture technology as something that has computers and electronics attached, and often it does. But, in the world of impacts, both in the realm of pneumatic and cordless, technology bears much deeper roots.

Brake Lathe Basics

Resurfacing drums and rotors is a machining process with its own specific guidelines.

Refrigerant Oil Has to Be Right

Oil type is just as important as oil capacity.

Three bottles of refrigerant oil
Top 5 Tools: Steve Coffell, Auto World, Hazelwood, MO

Steve Coffell, a technician at Auto World in Hazelwood, MO, says his Top 5 Favorite Tools are: Related Articles – Mayhew Introduces New 14-Piece Micro Hand Tool Set – New Small Stud Extractor Now Available from Mayhew Tools – Matco Debuts 5-Piece Purple Screwdriver Set   OTC Genisys Touch – Quick scan, bidirectional control Snap-on

Wheel Bearing Adjustment Tools & Equipment

A wheel bearing that’s out of adjustment can reduce bearing life and can affect more than just the bearing. It’s important to adjust the wheel bearing endplay to the proper specifications. If the bearing set is adjusted too loose or too tight, it can cause the bearing to fail prematurely. There are a few types of assemblies, so using correct procedures and tools will ensure a comeback-free wheel bearing installation.

Other Posts

Upgrade Your Air System: It’s Easier Than You Think

Improving your shop airflow is only a benefit, unless you like to spend more time, work harder and make less money.

air flow tubes
Tools in the Eye of the Beholder

We’re here to help you see all the tools, so you can invest wisely.

Multimeter Accuracy: How Important Is It?

Multimeter accuracy is critical for EV diagnostics.

multimeter
More Than A Scan Tool

Scan tools serve as indispensable diagnostic hubs, offering access to a wealth of resources, from OEM technical bulletins to community-documented repairs.

scan tool