Dannmar D4-12A Alignment Lift

Dannmar Introduces D4-12A Alignment Lift

The lift comes with free-floating, HD turnplates and rear slip plates built right into the runways for maximum convenience.

The new D4-12A alignment lift from Dannmar (a BendPak brand) can be used to perform two- or four-wheel alignments and general service work on cars, SUVs and light trucks weighing up to 12,000 lbs.

“The D4-12A is such a versatile piece of equipment, it’s like getting two lifts in one: an alignment lift and a service lift,” said John Vera, product specialist with Dannmar. “It’s convenient for shops that don’t want to dedicate an entire bay to alignments — with a Dannmar D4-12A, the same lift can be used for oil changes, undercar service and even wheel and brake work with the addition of rolling jacks.”

The D4-12A comes with free-floating, heavy-duty turnplates and rear slip plates built right into the runways for maximum convenience. They’re designed to allow precise alignment and maximum clearance to accommodate even low-slung vehicles. With the addition of alignment equipment, the lift can be used to perform four-wheel alignments from 106 to 158.5 inches and two-wheel alignments up to 163.5 inches.

With a maximum lifting height of 78 inches, there’s plenty of room to comfortably stand and work under a wide range of vehicles. The lift features an automatic leveling system with multiple auto-leveling locking positions in each column and a push-button safety release. The non-skid runways adjust for various tread widths. The D4-12A runs on an electric/hydraulic power system with a single hydraulic cylinder mounted under a runway for convenience and protection. All heavy-duty aircraft-grade lifting cables, safety locks and sheaves are fully enclosed for protection from the elements for long life.

Several accessories are available to increase productivity. Add a pair of DJ-6000 rolling bridge jacks to lift all four wheels off the runways to release the vehicle’s suspension and free up the wheels and tires. The optional Dannmar integrated rolling bridge airline kit mounts and secures the bridge jacks’ airline to the bottom of the lift runways so it’s out of the way and ready to go whenever it’s needed.

Another option is the DP-30 rolling oil drain. Designed to smoothly slide along the rails integrated in the D4-12A runways, the DP-30 has a 15-gallon capacity, a removable steel mesh cover to catch any debris and built-in drain nozzle.

Finally, brighten up the work area with LITESTIX LS36SMD portable work lights. LITESTIX uses 36 cool LED bulbs to provide 1,200 lumens of bright light virtually anywhere for hours between charges.

The Dannmar D4-12A alignment lift has been third-party tested and ALI certified to meet industry performance and safety standards. It’s backed by a three-year limited warranty and is available with free shipping in the 48 contiguous United States.

For more information, visit dannmar.com or call (877) 432-6627 Monday through Friday from 7 a.m. to 4:30 p.m. PST.

You May Also Like

CEMB Debuts 2-Hit Balancer at SEMA 2022

CEMB said its 2-hit balancer no longer uses an automatic gauge, which eliminates the need for periodic maintenance.

By Madeleine Winer, editor of Tire Review

CEMB USA debuted its new 2-hit wheel balancer at this year’s SEMA Show, which aims to simplify wheel balancing, especially for entry-level technicians. The new balancer uses a two-hit method on the tire to confirm wheel dimensions and send the data to the wheel balancer.

Hunter’s Bench Lathes Now Feature HunterNet 2

With the new connectivity, shop owners will be able to view before and after-cut results for rotors and drums online.

Hunter Engineering BL Series of bench lathes with tablets now also connects with the HunterNet 2 portal.
New Line of Rotary Fully Automatic A/C Recharging Machines

The new line provides technicians with a cost-effective way to recover, recycle and recharge R134a and R1234yf.

ESAB Launches Battery-Powered Stick/TIG Welder

The Renegade VOLT ES 200i is powered by four DEWALT FLEXVOLT batteries.

Hunter Engineering’s New Maverick Tire Changer

An all-new leverless head utilizes a Revolution-style tool and hook mechanism for maximum wheel protection.

Hunter Engineering Maverick tire changer

Other Posts

BendPak Two-Post Lift for Electric Vehicles and Beyond

AP Series features unique nested arms, Automatic Swing Arm Restraint System and other safety features.

Tire and Wheel Service Equipment

Wheels and tires are changing and so is the equipment we use to service them. See how the latest equipment updates stack up.

Hunter Center-Clamp Tire Changer Adjusts to 3 Heights

The new tire changers, which include a mobile version, meet the need for shop productivity in limited space.

BendPak Introduces New Ergochair Creeper/Work Seat

This work seat offers a range of adjustments to make performing awkward tasks in the shop less uncomfortable.