Dorman Offers Helpful Pointers for Inspecting, Diagnosing and Servicing Clock Springs

Dorman Offers Helpful Pointers for Inspecting, Diagnosing and Servicing Clock Springs

A clock spring isn't related to the clock and it doesn't have spring in it. However, it is found on every single vehicle, both import and domestic, produced since 1994. Dorman Products offers the following instructional pointers for technicians servicing clock springs.

A clock spring isn’t related to the clock and it doesn’t have spring in it. However, it is found on every single vehicle, both import and domestic, produced since 1994. Dorman Products offers the following instructional pointers for technicians servicing clock springs.

What Is a Clock Spring?
– An electronic component that transfers electrical current from the steering column to the steering wheel. This allows the operation of steering wheel-mounted accessories while the steering wheel is being turned.
– Steering wheel-mounted accessories such as the air bag, remote radio or cruise controls and horn are wired through the clock spring.

How Do They Fail?
– General Wear and Tear: After repeatedly turning the wheel, the wires inside the clock spring can break or disconnect.
– Collision: It is recommended to replace the clock spring after the airbag is deployed.
– Service Technician Error: The part will fail if during a rack and pinion or CV joint replacement job, the steering wheel isn’t tied down and the service technician turns the front wheels past the stopping point.

What Indicates Failure?
– Steering wheel-mounted accessories will stop working as soon as the wire separates. In the case of the airbag, a dash-mounted warning light illuminates. Basically, the clock spring diagnoses and sells itself.

Is This Repair Difficult and Is the Independent Repair Shop Performing this Repair Today?
– Repair shops are currently replacing clock springs today. The replacement is fairly straightforward using common hand tools and a steering wheel puller.
– The book time for replacement is 0.7 hrs. The actual job can be completed in about 30 minutes.

A Clock Spring Can Be Replaced in 10 Easy Steps
1. Remove the negative battery cable – Allow 2-3 minutes for the reserve current to bleed down before removing the air bag.
2. Remove the steering column trim cover.
3. Remove the air bag mounting bolts.
4. Disconnect the wiring harness from the air bag module.
5. Remove the air bag.
6. Remove the center nut from the steering column.
7. Remove the steering wheel dampener.
8. Using a steering wheel puller, remove the steering wheel.
9. Remove the clock spring attaching hardware and wiring harness.
10. Remove the clock spring.

Go to www.DormanProducts.com and view videos covering the removal and installation of clock springs.

You May Also Like

Several States Declare April As ‘Car Care Month’

Several governors across the country have declared April as Car Care Month in their respective states, urging their residents to be car care aware and perform the service necessary to ensure their vehicles are operating in a safe, efficient and clean manner.

Several governors across the country have declared April as Car Care Month in their respective states, urging their residents to be car care aware and perform the service necessary to ensure their vehicles are operating in a safe, efficient and clean manner.
The following governors have issued official state proclamations that April is Car Care Month: Gov. Robert Bentley of Alabama, Gov. John Hickenlooper of Colorado, Gov. Pat Quinn of Illinois, Gov. Rick Snyder of Michigan, Gov. Susana Martinez of New Mexico, Gov. John A. Kitzhaber, M.D. of Oregon, Gov. Nikki R. Haley of South Carolina, Gov. Bill Haslam of Tennessee, Gov. Peter Shumlin of Vermont and Gov. Earl Ray Tomblin of West Virginia.
“We want to thank these governors for officially proclaiming April as Car Care Month,” said Rich White, executive director, Car Care Council. “Car Care Month provides a unique opportunity for the auto care industry and the government to educate car owners on the importance of proper vehicle care. Motor vehicle safety continues to be a major focus for state legislatures and regulatory agencies across the country, so we commend each of the governors for making these important proclamations.”
Spring is the perfect time for motorists to make sure their vehicles are running reliably after a rough winter and before the summer driving season begins. Many independent repair shops and community organizations throughout the country will conduct car care events during April. These events have revealed that three out of four vehicles inspected are in need of some type of maintenance or repair.
The non-profit Car Care Council offers many free tools on its website to help consumers drive smart, save money and be more environmentally friendly, including the popular 60-page Car Care Guide and a custom service schedule and email reminder service.
“By following a service schedule and performing preventative vehicle maintenance, motorists can ensure that their vehicles are safe and dependable. Plus, auto care can help save money in many ways, including reducing fuel consumption and extending vehicle life,” continued White. “We encourage all car owners across the country to get their vehicles inspected this April.”

Intake Manifold Gaskets: A Service Rundown

Back in the days when most

Monroe “Quick Rewards” Program Offers Incentives For Sales Of Monroe Quick-Strut Assemblies

Tenneco’s Monroe brand will offer an incentive to counterpeople for the sale of popular, ready-to-install Monroe Quick-Strut premium replacement assemblies. The Monroe “Quick Rewards” scorecard promotion – available for sales between April 1 and May 31, 2014 – will reward participants with a $10 prepaid card for each pair of qualifying Monroe Quick-Strut units sold.

Three AGM, Gel Cell Battery Myths

Chances are if the battery is not under the hood, it is an absorbent glass mat (AGM) or gel cell battery. These batteries pack a lot of power for their size and weight, which allows manufacturers to shave off a few pounds from the vehicle. That’s a big ­reason why they are being found more and more on late-model vehicles. Here are three AGM/gel cell myths.

10 Toughest Cabin Air Filter Jobs

There are still many late model vehicles that are not easy to service, and they require a significant amount of disassembly to gain access to the filter. For your shop, this is billable labor. Here are the 10 toughest jobs according to the editors of Underhood Service.

Other Posts

Utilizing Technology In the Service Garage

Shops that use technology effectively will increase customer service and improve internal processes to boost satisfaction.

PLZ Aeroscience Acquires Champion Brands to Expand Full-Service Automotive Capabilities

With this acquisition, PLZ expands its full-service automotive and industrial offerings, positioning the company to better serve its customers with a comprehensive suite of aerosol and non-aerosol products.

CarMD Marks 10 Years of Check Engine Light Repair Trends

A decade of diagnostic data from more than 41 million unique vehicles.

Mitchell 1 Enhances Wiring Diagrams in Latest ProDemand Software Release

Mitchell 1 announces the latest release of ProDemand repair information software includes enhanced wiring diagrams featuring intelligent navigation that takes users directly to the specific component diagram — with the related wires automatically highlighted.