Honda/Acura Front Compliance Bushing R&R Tool From SP Tools

Honda/Acura Front Compliance Bushing R&R Tool From SP Tools

This unique tool was designed to aid in the removal of the front lower control arm compliance bushings both 65 mm and 74 mm sizes found on many Honda and Acura vehicles. With time, the front compliance bushings wear out and rip causing the vehicle to have a knock, pop or squeak from the front suspension.

This
unique tool was designed to aid in the removal of the front lower control arm
compliance bushings both 65 mm and 74 mm sizes found on many Honda and Acura
vehicles.

With time, the front compliance bushings wear out and rip causing the vehicle
to have a knock, pop or squeak from the front suspension. Our #68100
bushing tool allows the technician with minimal effort to remove and reinstall
these bushings. The #68100 cuts an hour off the job and the use of a
press is not required.

Made from high quality heat treated steel, this tool works on over 7 million
vehicles since 2000 and comes in a professional Hi-Tech black finish all
contained in a blow molded box.

This tool works on:
65 mm bushings for:

Honda

Civic 2001-2005
CRV 2002-2006
Element 2003-2006
Pilot 2003 & later
Odyssey 2005 & later
Ridgeline 2006 & later

Acura

MDX 2000-2006

74 mm bushings for:
Honda

Accord 2003-2007
Acura

TL 2000-2007

For
additional information, visit http://www.sptool.com/.

 

 

 

You May Also Like

New Snap-on Limited Edition Speed Demon Roll Cab

Features include next-level organization, durability, security, mobility and exclusive Speed Demon emblem.

The new Snap-on KETP682A3WHZ Limited-Edition Speed Demon EPIQ 68" Roll Cab adds “wow” factor in a tool storage showpiece. Next-level organization, durability, security, mobility, and the exclusive Speed Demon emblem represents everything enviable about working in the industry that keeps the world moving.

“The Speed Demon’s exclusive badging features an intricately detailed skull intertwined with pistons and an engine, symbolizing speed and the rebellious spirit that comes with being part of the automotive and heavy-duty worlds that combine high-level skills with high-level power,” says Angelo Gargano, Snap-on Product Manager. “The fusion of skull and pistons evokes a sense of raw energy and daring, while the meticulous craftsmanship of this roll cab reflects both techs’ and Snap-on’s dedication to quality and innovation.”

Lisle Low Profile Fuel Line Disconnect

Designed for Ford vehicles with limited clearance between fuel line and high-pressure pump.

Dent Fix Soft-Shock Mallet DF-SM76 Reduces Damage

Apply firm precision taps for dashboards, head- or tail-light assemblies, windshield placement, plastic bumper covers, interior or exterior decorative trim, emblems, and GPR/PDR work.

AMD-035 Membrane Dryer Provides Ultra-Clean & Ultra Dry Air

The dryer has a flow rating of 35 SCFM and maximum working pressures of 150 PSI.

New Rislone ‘DEF Crystal Clean’ Clears P20EE Codes

New Rislone DEF Crystal Clean Diesel DEF & SCR Emissions System Cleaner scrubs away crystal contaminants from the selective catalytic reduction (SCR) systems of diesel cars, trucks, and SUVs to cost-effectively restore power and performance.

Other Posts

New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits

Ford Power Stroke 6.7L & GM Duramax 6.6L ProKits easily remove compression seals and shorten repair times

AMSOIL Introduces New OE 0W-40 100% Synthetic Motor Oil

The new OE 0W-40 is primarily for newer RAM HD trucks equipped with the 6.4-liter Hemi engine.

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

CTA Tools Debuts Chrysler Cam Phaser Master Set – VVT & VVL

Applications included are for 2011-2022 Chrysler, Dodge & Jeep models.