Hotsy Introduces Waste Oil Heater in Time for Winter

Hotsy Introduces Waste Oil Heater in Time for Winter

Hotsy, the number one name in North America for high-pressure cleaning equipment, is broadening their product line to include a line of waste oil heaters. Throughout North America, participating Hotsy dealers will offer sales and service on the new waste oil heater models beginning on November 1, 2007.

Hotsy, the number one name in North America for high-pressure cleaning equipment, is broadening their product line to include a line of waste oil heaters. Throughout North America, participating Hotsy dealers will offer sales and service on the new waste oil heater models beginning on November 1, 2007.

Waste oil heaters burn waste oil and other petroleum-based products, and are often used as a secondary heating source. The introduction of the new waste oil heaters adds an entirely new facet to the Hotsy product line, as the company’s strategy has been focused on industrial cleaning equipment since 1970. The new products are actually a great fit since many of Hotsy existing customers can benefit by using a waste oil heater. Likely industries include auto service centers, quick lube shops, auto dealerships, truck repair facilities and virtually any location that generates used oil.

Waste Oil Heaters Provide an Economical Solution to Disposing of Waste Oil
Waste oil heaters offer an alternative to costly waste-oil disposal. Instead of paying high fees for the waste oil to be removed and disposed of properly, companies can cut down on their heating fuel expenses by burning used oil and converting it to energy to heat their shop.

Mark Adams, product manager for Hotsy’s waste oil heaters says, “I am extremely pleased with the decision to expand our equipment selection to include heaters. Many Hotsy dealers already provide sales and service for this industry, so it’s a natural progression. I am confident Hotsy customers will be pleased with the many benefits a waste oil heating system can provide."

Three of the four Hotsy waste oil heater models will be equipped with an on-board air compressor, while all models have an upgraded waste oil supply pump for consistent, trouble-free operation. Other features include:

  • BTU input ranging from 155,000 to 500,000;
  • .75 to 3.6 HP blower motor horsepower;
  • Accessible design means cleaning time is 75% less than a traditional heater;
  • Swing-out removable burner allows for easy access cleaning and maintenance;
  • Dual, multi-directional air outlets; and
  • Efficient clean combustion.

For 37 years, Hotsy has been providing cleaning solutions to numerous industries. Hotsy manufactures a full line of high-pressure cleaning equipment, including hot and cold-water pressure washers, automatic parts washers and biodegradable detergents. Hotsy equipment is available exclusively through our network of authorized dealers located throughout North America.

For more information on Hotsy, visit http://www.Hotsy.com.

You May Also Like

Pulling Codes: Multiple Misfire Personalities

A vehicle fails an emission test due to a series of codes, with misfire activity found on cylinders 2, 4, 6, 8 and 3 – and a strange metallic sound can be heard when the rpms are raised. See how Carlton Banks solves this latest Pulling Codes case.

A Story of Codes P0302, 04, 06, 08 & 03
 

This month’s diagnostic journey begins with a 2008 Land Rover Discovery that is taken in to a local testing facility for an emission test and fails due to a series of misfire codes.

Misfire activity is found on cylinders 2, 4, 6, 8 and 3; at first glance this series of codes implies that there may be bank 2 issues, but the cylinder 3 code throws a wrench into that mode of thought.

Using Volumetric Efficiency to Determine the Health of an Engine

Using an OBD II scan tool/dynamometer simulation/calculation program that can graph volumetric efficiency (VE) over rpms, contributor Glen Beanard devised a test sequence using real-world vehicles. This article takes you step by step through his diagnostic process.

Intermittent Engine Misfire Analysis

Even for an experienced diagnostic technician, attempting to diagnose an intermittent misfire condition that occurs only under specific driving conditions can be a frustrating exercise. Contributor Gary Goms breaks it down, and includes tips for using a scan tool and a lab scope.

5 Mistakes Newbie Tire Techs Make

Nothing can turn a new tech into a veteran but time and experience, and often that experience is going to come from making mistakes – sometimes real bad ones – and learning from them (you hope). By addressing these most common mistakes right away with new tire techs, the worst of them can be avoided.

Rivet Bonding Comes Full Blast

Now that rivet bonding is in the mainstream with the Ford F-150, it’s time for shops to look into training and equipment for this repair process.

Other Posts

‘Test Before Touch’ – It’s No Waste of Time

To help reduce the headaches involved in servicing TPMS, it’s important to use the “Test Before Touch” procedures in your shop. Used properly, TBT can form a strong foundation for everything else you do regarding TPMS, reduce complexity and help you educate and keep your customers.

The Right Diagnostic Tools Save You From Extensive Disassembly Time

It can sometimes be difficult to make the correct diagnosis for a hard-to-start complaint. And diagnostic time may be extensive — and expensive. This article shows how certain tools have the ability to automatically analyze waveforms for you.

Know the Specs for Your Social Media Accounts

If you’re doing social media, are you doing it effectively? Are your accounts set up correctly? Are you posting often enough? Mark Claypool answers some questions.

Top 5 Tools: Kenny Younkins, Ken’s Auto Service Center

Kenny Younkins, owner Related Articles – Mayhew Introduces New 14-Piece Micro Hand Tool Set – New Small Stud Extractor Now Available from Mayhew Tools – Matco Debuts 5-Piece Purple Screwdriver Set Ken’s Auto Service Center Akron, OH While Ken first said his favorite tool is his fishing rod, he said in the shop he prefers