Hunter Offers New Bead Press Arm Upgrade Kit for TC3700 and TC3500 Tire Changers

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Techshop Magazine
The automotive industry’s knowledge base for equipment, tools and supplies
Products

Hunter Offers New Bead Press Arm Upgrade Kit for TC3700 and TC3500 Tire Changers

To enhance the capabilities of the TC3700 and TC3500 tire changers, Hunter now offers a new bead press arm upgrade kit to help service difficult wheel and tire combinations.

TechShop Staff Writers
By TechShop Staff Writers
Published:

Related Articles

To enhance the capabilities of the TC3700 and TC3500 tire
changers, Hunter now offers a new bead press arm upgrade kit to help service
difficult wheel and tire combinations.

The Bead Press Arm pushes and holds
stiff sidewalls in the drop-center position of a rim as the wheel rotates to ease
demounting or mounting and greatly reduce stress to the bead and operator. The
upgrade kit works with all current and preceding Hunter TC3700 and TC3500 tire
changer models.

For additional information, visit www.hunter.com
or contact Robert Bruce, Advertising Manager, Hunter Engineering Company,
314-716-0443.

You May Also Like

Equipment

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

TechShop Staff Writers
By TechShop Staff Writers
Published:

The new BendPak SP-7XE Series of full-rise scissor lifts provides the performance and undercarriage access of traditional two-post lifts in a more compact, space-saving package. Floor- and flush-mount (SP-7XEF) models of this frame-engaging lift are available. 

With a rated capacity of 7,000 pounds, SP-7XE Series lifts are designed for full-service auto shops, quick-lube pits, and any other service area with little room to spare. They can raise most passenger vehicles and light trucks nearly six feet, so techs can easily access all critical undercarriage areas without having to stoop or crawl across the floor. They fold flat when not in use. 

Read Full Article

More Products Posts
CTA Tools Debuts Chrysler Cam Phaser Master Set – VVT & VVL

Applications included are for 2011-2022 Chrysler, Dodge & Jeep models.

By TechShop Staff Writers
Mayhew Introduces New 14-Piece Micro Hand Tool Set

This new set is a compilation of all the current micro line products from Mayhew; including pry bars, picks, hooks and screwdrivers.

By TechShop Staff Writers
Victor Reinz Reinzosil Sealant Added to Spicer CV Service Kits

Victor Reinz Reinzosil vulcanizing silicone boosts resistance to various fluids, making it sensor-safe for a wide range of applications.

By TechShop Staff Writers
Gray Tools Introduces Insulated Hex Bit Socket Set

The insulated tool sets are backed by a limited lifetime warranty.

By TechShop Staff Writers

Other Posts

Snap-on Debuts New General Service Set 

The company says technicians now have maximized tool concentration in the smallest footprint.

By TechShop Staff Writers
Chevron Introduces New Rykon Formula to Grease Product Line

The new calcium sulfonate complex-based grease is designed for heavy-duty and extreme pressure applications.

By TechShop Staff Writers
New Small Stud Extractor Now Available from Mayhew Tools

This new stud extractor, 1/4″ drive, allows for stud and bolt removal from tighter spaces with a wide option of driver abilities for job versatility.

By TechShop Staff Writers
6250 1⁄4” Mini Rt. Angle Die Grinder

The low weight ultra-compact design provides added control and maneuverability.

By TechShop Staff Writers