Hunter Releases New Quick Tread Console for Automatic Inspection Technology

Hunter Releases New Quick Tread Console for Automatic Inspection Technology

Approximately 25% of all customer tires are in need of immediate replacement or will need to be replaced soon. By auditing every vehicle and presenting timely, informative tire offers, shops are able to dramatically increasing customer tire sales.

The Quick Tread console includes everything needed to run a fully automatic inspection lane.Hunter’s Quick Tread inspection technology automatically measures tire tread depth and captures vehicle identification in seconds as motorists drive into the service lane. The new, compact console provides a clean installation virtually anywhere in or nearby the service drive thereby saving valuable space.

The Quick Tread console includes everything needed to run a fully automatic inspection lane and can be connected to a network printer at the service desk to provide customers inspection result printouts. The Quick Tread system can also be integrated with multi-point inspection providers to supply digital inspection reports and tires offers to customers. 

Approximately 25% of all customer tires are in need of immediate replacement or will need to be replaced soon. By auditing every vehicle and presenting timely, informative tire offers, shops are able to dramatically increasing customer tire sales. Studies show 78% of consumers maintain their vehicle where they purchase tires.

For additional information, visit hunter.com or contact your local Hunter representative at hunter.com/demos.

You May Also Like

CEMB Debuts 2-Hit Balancer at SEMA 2022

CEMB said its 2-hit balancer no longer uses an automatic gauge, which eliminates the need for periodic maintenance.

By Madeleine Winer, editor of Tire Review

CEMB USA debuted its new 2-hit wheel balancer at this year’s SEMA Show, which aims to simplify wheel balancing, especially for entry-level technicians. The new balancer uses a two-hit method on the tire to confirm wheel dimensions and send the data to the wheel balancer.

Hunter’s Bench Lathes Now Feature HunterNet 2

With the new connectivity, shop owners will be able to view before and after-cut results for rotors and drums online.

Hunter Engineering BL Series of bench lathes with tablets now also connects with the HunterNet 2 portal.
New Line of Rotary Fully Automatic A/C Recharging Machines

The new line provides technicians with a cost-effective way to recover, recycle and recharge R134a and R1234yf.

ESAB Launches Battery-Powered Stick/TIG Welder

The Renegade VOLT ES 200i is powered by four DEWALT FLEXVOLT batteries.

Hunter Engineering’s New Maverick Tire Changer

An all-new leverless head utilizes a Revolution-style tool and hook mechanism for maximum wheel protection.

Hunter Engineering Maverick tire changer

Other Posts

Video: Nissan Around View ADAS Camera Calibration

Learn how to calibrate the intelligent Around View Monitor system on a Nissan.

Hunter Nissan Around View video ADAS calibration
Video: Collision Blueprinting with Alignment Equipment

Learn how the ADASLink scan tool leads a tech through the pre-scan and use of extenders and ride height targets.

National Veteran’s Council Recognizes Hunter Engineering

The council ensures that valid and complete documentation exists for veteran status, ownership and operational control.

Video: Accessing the FCA/Stellantis Secure Gateway

Learn how this diagnostic scan tool helps serve as the key that opens the secure gateway in FCA/Stellantis vehicles.