ITM's TPMS Uni-sensor Fulfills Shops' Needs With Two SKUs

ITM’s TPMS Uni-sensor Fulfills Shops’ Needs With Two SKUs

The ITM Uni-sensor is one of the first programmable TPMS programs that provides 95% vehicle application coverage for domestic, Asian and European vehicles.

The ITM Uni-sensor is one of the first programmable TPMS programs that provides 95% vehicle application coverage for domestic, Asian and European vehicles.

There are currently more than 147 SKUs of OE TPMS sensor applications and the number continues to grow. Uni-sensor presents a programmable sensor that requires only a single programming tool — the sensor AID, which is also a diagnostic/scan and re-trigger/relearn tool for your TPMS service needs.

The ultimate objective of the Uni-sensor is to reduce a tire dealer’s and repair shop’s inventory by more than 95% with just two SKUs (315 MHz sensor and 433 Mhz sensors available in both clamp-in or snap-in).

 

You May Also Like

Chevron Introduces New Rykon Formula to Grease Product Line

The new calcium sulfonate complex-based grease is designed for heavy-duty and extreme pressure applications.

Chevron announced the introduction of Rykon, a new overbased calcium sulfonate complex grease, to its recently refreshed line of products. Chevron says Rykon answers the call for a high-performance grease that increases uptime and helps enhance durability for the next generation of equipment.

With its formulation, Rykon will round out Chevron’s grease offering with a grease formulated for heavy-duty and extreme pressure applications. This calcium sulfonate complex-based grease also provides an alternative option to lithium-based thickeners.

Scan Tools: Solving the Diagnostic Puzzle

“The fact is, the most expensive tool may not be the best tool for you. It depends on what vehicles you work on and what you want out of the tool.” – Dwayne Myers, Dynamic Automotive, Frederick, MD Related Articles – ISN’s Annual Tool Dealer Expo Gives Attendees Sneak Peek at New Products – Editor’s

ISN’s Annual Tool Dealer Expo Gives Attendees Sneak Peek at New Products

The TechShop team and more than 3,500 attendees from around the world recently joined Integrated Supply Network (ISN) at its 14th annual Tool Dealer Expo June 24-25 in Orlando, FL. There, suppliers launched new products and gave away more than $2 million in cash and prizes throughout the weekend event. Related Articles – Are You

Editor’s Notes: ‘The Rising Tide Lifts All Boats’

For the past year and a half, in addition to being editor of TechShop, I’ve also carried the role as editor of our student publication Tomorrow’s Tech, which is delivered to NATEF-certified automotive technical programs throughout the U.S. With this responsibility, I’m keenly aware of the industry’s need for the next generation of automotive service

Make Aluminum Welding Easier with Cebotech’s MIG Welders

All three of Cebotech’s MIG welders (models 301, 302 and 322) were designed to make aluminum welding easier. Related Articles – New Small Stud Extractor Now Available from Mayhew Tools – 6250 1⁄4” Mini Rt. Angle Die Grinder – BendPak to Debut Eight-Armed Car Lift Concept at NADA They’re supplied with built-in welding programs for easy setup,

Other Posts

Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah
Scan Tool Tech

While systems can and will differ, here’s a look at common ADAS features, their general configurations and calibration requirements.

scan tool tech
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool
Matco Debuts 5-Piece Purple Screwdriver Set

The purple screwdriver set includes a variety of sizes and types.