JEGS Offers Billet Aluminum Cylinder Head Mount Fuel Pressure Regulator Brackets

JEGS Billet Aluminum Cylinder Head Mount Fuel Pressure Regulator Brackets answer the question of where do I want to mount it? The closer that the regulator is located to the carburetor, the closer that the pressure setting resembles what is actually being fed into the carb.

Published: September 28, 2010

JEGS Billet Aluminum Cylinder Head Mount Fuel Pressure Regulator Brackets answer the question of where do I want to mount it? The closer that the regulator is located to the carburetor, the closer that the pressure setting resembles what is actually being fed into the carb. Available for the most common cylinder heads and fits JEGS, Aeromotive, BG, Holley and Quick Fuel regulators. The CNC machined 6061 billet aluminum bracket features a clear anodize finish and stainless steel mounting hardware. Made in USA.

555-159105 – Head Mount Regulator Bracket – SBC and SB-Ford

555-159106 – Head Mount Regulator Bracket – BBC

For additional information, visit
http://www.jegs.com/p/JEGS/JEGS-Billet-Aluminum-Cylinder-Head-Mount-Fuel-Pressure-Regulator-Brackets/1395294/10002/-1.

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

By TechShop Staff Writers

Published: March 1, 2024

The new BendPak SP-7XE Series of full-rise scissor lifts provides the performance and undercarriage access of traditional two-post lifts in a more compact, space-saving package. Floor- and flush-mount (SP-7XEF) models of this frame-engaging lift are available.

With a rated capacity of 7,000 pounds, SP-7XE Series lifts are designed for full-service auto shops, quick-lube pits, and any other service area with little room to spare. They can raise most passenger vehicles and light trucks nearly six feet, so techs can easily access all critical undercarriage areas without having to stoop or crawl across the floor. They fold flat when not in use.

Social Connect

Resources

Our Brand Family

JEGS Offers Billet Aluminum Cylinder Head Mount Fuel Pressure Regulator Brackets

JEGS Billet Aluminum Cylinder Head Mount Fuel Pressure Regulator Brackets answer the question of where do I want to mount it? The closer that the regulator is located to the carburetor, the closer that the pressure setting resembles what is actually being fed into the carb.

You May Also Like

Mueller Kueps Presents Redesigned Sensor Tap Series

TOPDON Debuts 2-in-1 Jump Starter and Battery Tester

ContiConnect Lite to Allow Digital Tire Management for OTR tires

New Snap-on Limited Edition Speed Demon Roll Cab

ECM Damage

Programming Options

Cordless vs. Pneumatic: The Battle Continues

Identity Crisis and the Rise of the Specialist

Lisle Low Profile Fuel Line Disconnect

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

Read Full Article

More Products Posts

CTA Tools Debuts Chrysler Cam Phaser Master Set – VVT & VVL

Mayhew Introduces New 14-Piece Micro Hand Tool Set

Victor Reinz Reinzosil Sealant Added to Spicer CV Service Kits

Gray Tools Introduces Insulated Hex Bit Socket Set

Other Posts

Snap-on Debuts New General Service Set

Chevron Introduces New Rykon Formula to Grease Product Line

New Small Stud Extractor Now Available from Mayhew Tools

6250 1⁄4” Mini Rt. Angle Die Grinder

Our Brands

Visit our other Brands to drive your success

Related Articles

You May Also Like

Read Full Article