Jenny Products Electric Single-Stage, Horizontal-Tank Air Compressors

Jenny Offers Line of Electric Single-Stage Air Compressors

Each unit is splash lubricated with compressor pump oil to ensure components are protected.

Jenny Products, Inc. offers a line of electric single-stage, horizontal-tank stationary air compressors. Built in the United States with quality and safety in mind, the 16 single-stage belt-driven models feature cast-iron compressor pumps and powder-coated, ASME-certified tanks.

The largest models in the Jenny single-stage line offer 60- or 80-gallon horizontal tanks and provide 5 horsepower while displacing 27.8 or 28.7 cfm at 125 psi. Magnetic starters come standard on these larger units. A wide range of horsepower and cfm displacement levels are available from there, including 3, 2, 1.5, 1 and 3/4 horsepower. The smallest model in the line uses a 17-gallon tank and provides 1/2 horsepower. It displaces 3.4 cfm at 125 psi.

Each unit is splash lubricated with Jenny “Ultimate Blue” Compressor Pump Oil to ensure the pistons, bearings, crankshaft, rings and cylinders are protected. Additionally, thermal-overload protection prevents the motor from drawing too much current, overheating and burning out, while a pressure-release safety valve automatically opens when needed to eliminate pressure build-up.

Other standard, quality features on all single-stage models are manual tank drains, a large canister intake filter with replaceable filter elements, a tank gauge and an industrial/commercial-grade UL-listed electric motor providing one-phase or three-phase power. Special unloading valves assist in starting the motor, and a large flywheel provides for easier start-up and extra cooling. A directional air shroud helps further reduce pump temperatures.

An automatic start/stop control with a pressure unloader set at 105-125 psi also comes standard throughout the series. When pressure drops, the control closes a switch and starts the air compressor to maintain a constant pressure. When the appropriate level is again reached, the compressor stops and an unloader valve expels any air between the check valve and compressor. A constant-run feature may be installed instead for those requiring a constant, heavy flow of compressed air, and a dual-control option also is offered, enabling the operator to switch between the two configurations as needed.

A number of optional features also are available throughout the single-stage, horizontal-tank, mounted line, including an oil sight glass, low-oil-level switch and control circuit transformer. An air-line filter can be added to remove contaminants in the air and a lubricator will ensure proper lubrication regardless of air-flow levels for tools such as ratchets and impacts. An optional aftercooler will cool hot, compressed air laden with water vapor to a liquid so that it can be removed from the system rather than sent downstream, and adding a dryer will be beneficial when dealing with water condensation in freezing or high-humidity conditions. Each Jenny compressor also is available in additional pressure configurations.

For more info:

Jenny Products, Inc.
Phone: 814-445-3400Fax: 814-445-2280Contact: Daniel Leiss

You May Also Like

Expand Long-Term or Short-Term Parking with New BendPak Lift

PL-6000DC two-post lifts can be ganged together to fit more vehicles into a smaller space.

Maximize space with the new BendPak PL-6000DC two-post parking lift. It’s designed to be ganged together with shared columns so more lifts can fit in a smaller area, indoors or outside. 

With a rated capacity of 6,000 pounds, the commercial-grade PL-6000DC can be installed in a typical 8-foot parking space and accommodates a wide range of vehicles, including SUVs, light trucks, sedans, and sports cars. It offers a great combination for both long-term and short-term parking. Generally, long-term parking is on the upper level and short-term is below. 

Rotary Debuts All-Vehicle Lift Arms at 2023 SEMA Show

The new arms make it easier to correctly spot and lift nearly any vehicle, including next generation EVs, using a single lift.

Hofmann Introduces New Armored Series Wheel Balancer

The 2400P helps eliminate guesswork with a pinpoint laser for the exact location of weight application.

Hofmann Armored Series 2400P wheel balancer
Elevate Your Automotive Work with Mueller-Kueps’ Versatile Creeper 

This creeper boasts a slightly elevated, upholstered headrest for added comfort during vehicle maintenance.

Hunter Engineering Expands Wheelbase For Popular Scissor Lifts

Extra length responds to growing industry needs.

Other Posts

New F-150 Rear Axle Repair Kit

Make on-the-truck repairs for m.y. 2021-2023 vehicles with Trailer Tow Max Duty Package.

Lisle 61860 Oil Filter Housing Torque Adapter

Prevent Over Tightening Plastic and Aluminum Oil Filter Canisters and Filters.

Mueller Kueps Presents Redesigned Sensor Tap Series

Professionally restore NOX sensor hole threads.

TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread