Jenny’s Portable Compressor, Two-Stage Electric Pump

Jenny’s Portable Compressor Features High-Volume, Two-Stage Electric Pump

The W5B-30P includes a 30-gallon air tank and features Jenny’s “W” pump, a four-cylinder, two-stage pump with long piston strokes for producing large volumes of air at high pressure ratings.

Jenny-compressor-W5B

 

Jenny Products, Inc. introduces its W5B-30P two-stage, electric-powered compressor. The wheeled-portable unit is designed to produce high air flow while meeting the demands of tough jobsites.

The W5B-30P includes a 30-gallon air tank and features Jenny’s “W” pump, a four-cylinder, two-stage pump with long piston strokes for producing large volumes of air at high pressure ratings. It delivers 18.1 cfm at 100 psi or 17.9 cfm at 175 psi. The pump is belt driven by a 5-hp electric motor, which requires a 230-volt, single-phase electrical source.

Numerous features come standard with the compressor to optimize its reliability and reduce its maintenance requirements. These include a directional air shroud and a large flywheel for keeping pump temperatures low. Also, Jenny’s professional-duty “Ultimate Blue” synthetic pump oil protects the unit’s pistons, crankshaft, bearings, rings and cylinders through a splash lubrication system. Furthermore, the compressor’s thermal overload protection helps prevent costly damage to the motor.

For easy maneuvering and positioning around the jobsite, the W5B-30P includes two fully pneumatic tires, and convenient lifting handles are integrated into opposite ends of the compressor’s frame. Additionally, the compressor comes equipped with a manual tank drain, safety relief valve, large canister intake with replaceable filter elements, special unloading valves, protected fittings, and tank, regulator and outlet pressure gauges. Options include an oil sight glass, air line filter, lubricator, and a CSA-approved model.

For more information on its line of equipment, contact Jenny Products, Inc., call 814-445-3400, fax 814-445-2280 or visit www.jennyproductsinc.com.

Jenny Products, Inc.
Phone: 814-445-3400Fax: 814-445-2280Contact: Daniel Leiss

You May Also Like

Hunter Engineering Expands Wheelbase for Scissor Lifts

Extra length responds to growing industry needs.

Hunter Engineering has announced new, longer variations of its RX14 and RX16 scissor alignment racks. These new models, RX14KL and RX16KL, can accommodate up to 195-inch two-wheel wheelbases.

The RX14KL lift gains an additional 13 inches, while the RX16KL picks up an additional 17 inches.

Cementex Debuts New Arc Rated Face Shields

Updated face shield provide classic, reliable arc flash protection.

Hunter Engineering Introduces Hawkeye XL Alignment System

New aligner offers speed, versatility and ease of use, the company says.

Cool Boss Air Coolers Fill Shops with Chilled Air, Tunes

CB-28 and CB-36 evaporative coolers feature air ionizers, Bluetooth players, LED floodlights.

New Coolee by Cool Boss 3-in-1 Portable Air Cooler

Coolee CL-240 air cooler / ice chest / Bluetooth player delivers personalized comfort.

Other Posts

TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool
Upgrade Your Air System: It’s Easier Than You Think

Improving your shop airflow is only a benefit, unless you like to spend more time, work harder and make less money.

air flow tubes
Utilizing Fully Automatic A/C Equipment on Today’s Cars

As technology evolves, fully automatic A/C equipment becomes a greater necessity.

A/C knob