KTI Launches Master Socket Sets in Blow-Molded Cases

KTI Launches Master Socket Sets in Blow-Molded Cases

K-Tool International (KTI), a leading manufacturer of tools for the automotive aftermarket and professional mechanic, recently introduced 44-piece 1/4" drive and 47-piece 3/8" standard and metric socket sets.

K-Tool International (KTI), a leading manufacturer of tools for the automotive aftermarket and professional mechanic, recently introduced 44-piece 1/4” drive and 47-piece 3/8” standard and metric socket sets.

Designed for users who want their sockets readily available, the sets come packaged in a durable molded plastic storage case.

The 44-piece 1/4” drive set, all six point, includes sizes 3/16”-9/16” (standard length fractional), 1/4”-9/16” (deep fractional), 4mm-15mm (standard length metric) and 6mm-15mm (deep metric). The set also comes with a 3/8” drive pro ratchet and 3” and 6” extensions.

The 47-piece 3/8” drive set, available in six or 12 points, includes sizes 1/4”-7/8” (standard length fractional), 3/8”-7/8” (deep fractional), 6mm-19mm (standard length metric) and 10mm-19mm (deep metric). The set also comes with a 1/4” drive pro ratchet and 2” and 6” extensions.

KTI sockets are designed to perform consistently and withstand even the most heavy-duty applications.

All KTI hand tools come with a life-time warranty.

For further information, visit www.ktoolinternational.com.

You May Also Like

Pulling Codes: Multiple Misfire Personalities

A vehicle fails an emission test due to a series of codes, with misfire activity found on cylinders 2, 4, 6, 8 and 3 – and a strange metallic sound can be heard when the rpms are raised. See how Carlton Banks solves this latest Pulling Codes case.

A Story of Codes P0302, 04, 06, 08 & 03

This month’s diagnostic journey begins with a 2008 Land Rover Discovery that is taken in to a local testing facility for an emission test and fails due to a series of misfire codes.

Misfire activity is found on cylinders 2, 4, 6, 8 and 3; at first glance this series of codes implies that there may be bank 2 issues, but the cylinder 3 code throws a wrench into that mode of thought.

Using Volumetric Efficiency to Determine the Health of an Engine

Using an OBD II scan tool/dynamometer simulation/calculation program that can graph volumetric efficiency (VE) over rpms, contributor Glen Beanard devised a test sequence using real-world vehicles. This article takes you step by step through his diagnostic process.

Intermittent Engine Misfire Analysis

Even for an experienced diagnostic technician, attempting to diagnose an intermittent misfire condition that occurs only under specific driving conditions can be a frustrating exercise. Contributor Gary Goms breaks it down, and includes tips for using a scan tool and a lab scope.

5 Mistakes Newbie Tire Techs Make

Nothing can turn a new tech into a veteran but time and experience, and often that experience is going to come from making mistakes – sometimes real bad ones – and learning from them (you hope). By addressing these most common mistakes right away with new tire techs, the worst of them can be avoided.

Rivet Bonding Comes Full Blast

Now that rivet bonding is in the mainstream with the Ford F-150, it’s time for shops to look into training and equipment for this repair process.

Other Posts

‘Test Before Touch’ – It’s No Waste of Time

To help reduce the headaches involved in servicing TPMS, it’s important to use the “Test Before Touch” procedures in your shop. Used properly, TBT can form a strong foundation for everything else you do regarding TPMS, reduce complexity and help you educate and keep your customers.

The Right Diagnostic Tools Save You From Extensive Disassembly Time

It can sometimes be difficult to make the correct diagnosis for a hard-to-start complaint. And diagnostic time may be extensive — and expensive. This article shows how certain tools have the ability to automatically analyze waveforms for you.

Know the Specs for Your Social Media Accounts

If you’re doing social media, are you doing it effectively? Are your accounts set up correctly? Are you posting often enough? Mark Claypool answers some questions.

Top 5 Tools: Kenny Younkins, Ken’s Auto Service Center

Kenny Younkins, owner Related Articles – New Small Stud Extractor Now Available from Mayhew Tools – Matco Debuts 5-Piece Purple Screwdriver Set – Mayhew Debuts New Fluorescent Handled Screwdrivers Ken’s Auto Service Center Akron, OH While Ken first said his favorite tool is his fishing rod, he said in the shop he prefers these five: