KYB GR-2 Engineered to Restore Vehicle Control and Handling

KYB GR-2 Engineered to Restore Vehicle Control and Handling

KYB America LLC, a supplier of OE and aftermarket shocks and struts, has specially engineered its GR-2 shocks and struts to help restore vehicle control and handling to the way the manufacturer originally intended.

KYB America LLC, a supplier of OE and aftermarket shocks and struts, has specially engineered its GR-2 shocks and struts to help restore vehicle control and handling to the way the manufacturer originally intended. In older vehicles, especially those with 50,000 miles or more, a standard replacement shock or strut may not be enough to deliver original equipment product quality and restore the original performance. That’s why KYB has recalibrated the GR-2’s damping rate (boost) to compensate for worn suspension components. No other replacement shock or strut can make this claim.

KYB GR-2 shocks and struts are available for virtually all domestic and import cars, light trucks and SUVs.

Ride Control Maintenance Note:
Most experts agree that the performance of the average shock or strut at 50,000 miles usually degrades enough to warrant replacement and that automotive technicians should suggest a shock or strut replacement to restore the vehicle performance. Since all vehicles do not wear the same, several steps can be taken to help determine an appropriate shock and strut maintenance schedule. These include an annual inspection (or every 12,000 miles) along with a good road test. Consulting the owner’s manual can also help define normal and severe service operations for a particular vehicle.

For more information, log onto www.kyb.com.

You May Also Like

Pulling Codes: Multiple Misfire Personalities

A vehicle fails an emission test due to a series of codes, with misfire activity found on cylinders 2, 4, 6, 8 and 3 – and a strange metallic sound can be heard when the rpms are raised. See how Carlton Banks solves this latest Pulling Codes case.

A Story of Codes P0302, 04, 06, 08 & 03
 

This month’s diagnostic journey begins with a 2008 Land Rover Discovery that is taken in to a local testing facility for an emission test and fails due to a series of misfire codes.

Misfire activity is found on cylinders 2, 4, 6, 8 and 3; at first glance this series of codes implies that there may be bank 2 issues, but the cylinder 3 code throws a wrench into that mode of thought.

Using Volumetric Efficiency to Determine the Health of an Engine

Using an OBD II scan tool/dynamometer simulation/calculation program that can graph volumetric efficiency (VE) over rpms, contributor Glen Beanard devised a test sequence using real-world vehicles. This article takes you step by step through his diagnostic process.

Intermittent Engine Misfire Analysis

Even for an experienced diagnostic technician, attempting to diagnose an intermittent misfire condition that occurs only under specific driving conditions can be a frustrating exercise. Contributor Gary Goms breaks it down, and includes tips for using a scan tool and a lab scope.

5 Mistakes Newbie Tire Techs Make

Nothing can turn a new tech into a veteran but time and experience, and often that experience is going to come from making mistakes – sometimes real bad ones – and learning from them (you hope). By addressing these most common mistakes right away with new tire techs, the worst of them can be avoided.

Rivet Bonding Comes Full Blast

Now that rivet bonding is in the mainstream with the Ford F-150, it’s time for shops to look into training and equipment for this repair process.

Other Posts

‘Test Before Touch’ – It’s No Waste of Time

To help reduce the headaches involved in servicing TPMS, it’s important to use the “Test Before Touch” procedures in your shop. Used properly, TBT can form a strong foundation for everything else you do regarding TPMS, reduce complexity and help you educate and keep your customers.

The Right Diagnostic Tools Save You From Extensive Disassembly Time

It can sometimes be difficult to make the correct diagnosis for a hard-to-start complaint. And diagnostic time may be extensive — and expensive. This article shows how certain tools have the ability to automatically analyze waveforms for you.

Know the Specs for Your Social Media Accounts

If you’re doing social media, are you doing it effectively? Are your accounts set up correctly? Are you posting often enough? Mark Claypool answers some questions.

Top 5 Tools: Kenny Younkins, Ken’s Auto Service Center

Kenny Younkins, owner Related Articles – Lisle Low Profile Fuel Line Disconnect – Dent Fix Soft-Shock Mallet DF-SM76 Reduces Damage – New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits Ken’s Auto Service Center Akron, OH While Ken first said his favorite tool is his fishing rod, he said in the shop he prefers these five: