Get Clean, Dry, Heated Atomizing Air from Your Existing Air Compressor

Get Clean, Dry, Heated Atomizing Air from Your Existing Air Compressor

The four-stage filtration is outfitted with an automatic moisture discharger. The clean air is further filtered to remove moisture content for super dry air.

Cleaning, drying and heating the atomizing air from your existing compressed air source can be accomplished with The Solution by Martech Services Company.

According to Tom Wright, director of sales and marketing, when placed near the point of use, The Solution will work with the existing compressed air source. The four-stage filtration is outfitted with an automatic moisture discharger. Then the clean air is further filtered to remove moisture content for super dry air. A controller, with digital outputs, allows user to set the temperature of the atomizing up to 165° F.  The Solution is shipped complete with a 3/8-in. ID x 35-ft. spray air hose.

“With the advent of waterborne paints becoming mandated by government agencies, the need for this type and quality of atomizing air is crucial,” Wright said.

The Solution is a complete compressed air system designed to clean, dry and heat the atomizing air for today’s spray paint requirements. It is easy to use, simple to install and affordable to maintain. The Solution works with both waterborne and solvent based paint systems.

For more information, call Martech Services Company at 1-800-831-1525.

Martech Services Company
Phone: 800-831-1525Fax: 507-843-4953Contact: Jamie Hanson

You May Also Like

Elevate Your Automotive Work with Mueller-Kueps’ Versatile Creeper 

This creeper boasts a slightly elevated, upholstered headrest for added comfort during vehicle maintenance.

Mueller-Kueps introduces its professional creeper in a vibrant neon green (No. 510 098) for enhanced visibility.

Crafted for daily use in workshops and mobile service trucks, this creeper boasts a slightly elevated, upholstered headrest for added comfort during vehicle maintenance. The built-in parts tray ensures convenient access to tools. With six smooth-rolling swivel casters, it effortlessly glides on various surfaces. 

Hunter Engineering Expands Wheelbase For Popular Scissor Lifts

Extra length responds to growing industry needs.

Philips Xperion Work Lights Designed to Save Service Pros Time

The two-part magnetic handles make it easy to aim the light exactly where it’s needed.

Hunter Engineering Expands Wheelbase for Scissor Lifts

Extra length responds to growing industry needs.

Cementex Debuts New Arc Rated Face Shields

Updated face shield provide classic, reliable arc flash protection.

Other Posts

TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool
Upgrade Your Air System: It’s Easier Than You Think

Improving your shop airflow is only a benefit, unless you like to spend more time, work harder and make less money.

air flow tubes
Hunter Engineering Introduces Hawkeye XL Alignment System

New aligner offers speed, versatility and ease of use, the company says.