Microflex Announces the Launch of New Dura Flock Nitrile Gloves

Microflex Announces the Launch of New Dura Flock Nitrile Gloves

Microflex Corporation recently announced the launch of a new hand protection product: Dura Flock nitrile gloves. These gloves were developed by Microflex after listening to its customers' opinions about what features they wanted in a glove specifically designed for use in automotive, industrial and laboratory environments ....

Microflex Corporation, a division of BarrierSafe Solutions International (BSSI), a leading provider of latex and synthetic hand protection, has announced the launch of a new hand protection product: Dura Flock nitrile gloves. These gloves were developed by Microflex after listening to its customers’ opinions about what features they wanted in a glove specifically designed for use in automotive, industrial and laboratory environments. Dura Flock gloves are the result of analyzing that end user data along with critical research and development.

The most unique feature of Dura Flock gloves is the flock-lining, which is a fine layer of cotton on the inside of the gloves. By absorbing moisture, the flock-lining keeps hands dry inside the glove, improving the grip, which is essential to automotive technicians, maintenance professionals and lab workers. While there have been flock-lined gloves for many years, never before have they been available in a disposable, one-time use glove.

Dura Flock gloves are made from nitrile, a latex-free alternative. This is important for those with latex allergies who need a non-latex glove, as allergic reactions to latex can be severe. At 8 mil, Dura Flock nitrile gloves are also the thickest gloves available from Microflex, yet, as Microflex Product Manager Jennifer Singh notes, “Dura Flock gloves are specially formulated to be more comfortable than the standard 8 mil glove.” Microflex Director of Corporate Accounts LeeAnn Nejedlo agreed that the thickness, flock-lining, and comfort of Dura Flock gloves make them “a good choice for extreme environments, like you find in factories, maintenance shops and laboratories.”

For more about Dura Flock gloves, visit www.DuraFlockRocks.com. “At the website,” says Nejedlo, “customers can see the features of the gloves in detail, and even download a sheet of specifications about the gloves.” The site delivers a lot of technical information about Dura Flock gloves in a creative way, with a rock and roll theme. Singh summarizes Dura Flock gloves as “a unique combination of comfort and increased protection coupled with a moisture absorbing flock-lining to create a unique product in the world of disposable hand protection.”

You May Also Like

Pulling Codes: Multiple Misfire Personalities

A vehicle fails an emission test due to a series of codes, with misfire activity found on cylinders 2, 4, 6, 8 and 3 – and a strange metallic sound can be heard when the rpms are raised. See how Carlton Banks solves this latest Pulling Codes case.

A Story of Codes P0302, 04, 06, 08 & 03
 

This month’s diagnostic journey begins with a 2008 Land Rover Discovery that is taken in to a local testing facility for an emission test and fails due to a series of misfire codes.

Misfire activity is found on cylinders 2, 4, 6, 8 and 3; at first glance this series of codes implies that there may be bank 2 issues, but the cylinder 3 code throws a wrench into that mode of thought.

Using Volumetric Efficiency to Determine the Health of an Engine

Using an OBD II scan tool/dynamometer simulation/calculation program that can graph volumetric efficiency (VE) over rpms, contributor Glen Beanard devised a test sequence using real-world vehicles. This article takes you step by step through his diagnostic process.

Intermittent Engine Misfire Analysis

Even for an experienced diagnostic technician, attempting to diagnose an intermittent misfire condition that occurs only under specific driving conditions can be a frustrating exercise. Contributor Gary Goms breaks it down, and includes tips for using a scan tool and a lab scope.

5 Mistakes Newbie Tire Techs Make

Nothing can turn a new tech into a veteran but time and experience, and often that experience is going to come from making mistakes – sometimes real bad ones – and learning from them (you hope). By addressing these most common mistakes right away with new tire techs, the worst of them can be avoided.

Rivet Bonding Comes Full Blast

Now that rivet bonding is in the mainstream with the Ford F-150, it’s time for shops to look into training and equipment for this repair process.

Other Posts

‘Test Before Touch’ – It’s No Waste of Time

To help reduce the headaches involved in servicing TPMS, it’s important to use the “Test Before Touch” procedures in your shop. Used properly, TBT can form a strong foundation for everything else you do regarding TPMS, reduce complexity and help you educate and keep your customers.

The Right Diagnostic Tools Save You From Extensive Disassembly Time

It can sometimes be difficult to make the correct diagnosis for a hard-to-start complaint. And diagnostic time may be extensive — and expensive. This article shows how certain tools have the ability to automatically analyze waveforms for you.

Know the Specs for Your Social Media Accounts

If you’re doing social media, are you doing it effectively? Are your accounts set up correctly? Are you posting often enough? Mark Claypool answers some questions.

Top 5 Tools: Kenny Younkins, Ken’s Auto Service Center

Kenny Younkins, owner Related Articles – Lisle Low Profile Fuel Line Disconnect – Dent Fix Soft-Shock Mallet DF-SM76 Reduces Damage – New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits Ken’s Auto Service Center Akron, OH While Ken first said his favorite tool is his fishing rod, he said in the shop he prefers these five: