Miller Adds Wicked Design to Elite and Digital Elite Series of Arc Armor Auto-Darkening Welding Helmets

Miller Adds Wicked Design to Elite and Digital Elite Series of Arc Armor Auto-Darkening Welding Helmets

Miller Electric Mfg. Co. recently introduced the Wicked design to its Elite and Digital Elite Series of auto-darkening Arc Armor welding helmets. These helmets are ideal for professionals who use Stick, MIG, TIG and plasma cutting applications and provide exceptional comfort and safety features.

Miller Electric Mfg. Co. recently introduced the Wicked design to its Elite and Digital Elite Series of auto-darkening Arc Armor welding helmets. These helmets are ideal for professionals and hobbyists who use Stick, MIG, TIG and plasma cutting applications and provide exceptional comfort and safety features. The new design reflects Miller’s ongoing emphasis on cutting edge graphics that make a marked visual impact, in this case, a “wicked” leering skull featuring long fangs joined by smaller skulls emerging from the intricate pattern.

Elite Series
Miller’s popular Elite Series helmet features four independent arc sensors that respond in 1/20,000 of a second and comes standard with Auto-On/AutoOff and Grind mode. Weighing 18 oz., Elite helmets are lightweight and comfortable and come complete with five outside and two inside replacement cover lenses, a Miller-exclusive fatigue-reducing comfort cushion and helmet bag.

Digital Elite Series
Building on Miller’s Elite Series, the Digital Elite series was designed for professional welders demanding control and flexibility. Digital Elite helmets feature the precision of a digital control that allows users to set and store their shade, sensitivity and delay preferences for various applications: Welding shades 8-13, Cutting shades 5-8, Grinding shade 3, and an X-Mode shades 8-13. The X-Mode provides full protection for those instances when there is an arc present, but the sensors are obscured. X-Mode eliminates interference from sunlight and out-of-position welding angles, such as those found in pipe welding or in obstructed or hidden-cavity welds — it also excels at low-amperage TIG welding (5 amps and below).

Miller auto-darkening helmets are covered by a two-year warranty.

For more information, visit Miller’s website at www.MillerWelds.com.

You May Also Like

Pulling Codes: Multiple Misfire Personalities

A vehicle fails an emission test due to a series of codes, with misfire activity found on cylinders 2, 4, 6, 8 and 3 – and a strange metallic sound can be heard when the rpms are raised. See how Carlton Banks solves this latest Pulling Codes case.

A Story of Codes P0302, 04, 06, 08 & 03
 

This month’s diagnostic journey begins with a 2008 Land Rover Discovery that is taken in to a local testing facility for an emission test and fails due to a series of misfire codes.

Misfire activity is found on cylinders 2, 4, 6, 8 and 3; at first glance this series of codes implies that there may be bank 2 issues, but the cylinder 3 code throws a wrench into that mode of thought.

Using Volumetric Efficiency to Determine the Health of an Engine

Using an OBD II scan tool/dynamometer simulation/calculation program that can graph volumetric efficiency (VE) over rpms, contributor Glen Beanard devised a test sequence using real-world vehicles. This article takes you step by step through his diagnostic process.

Intermittent Engine Misfire Analysis

Even for an experienced diagnostic technician, attempting to diagnose an intermittent misfire condition that occurs only under specific driving conditions can be a frustrating exercise. Contributor Gary Goms breaks it down, and includes tips for using a scan tool and a lab scope.

5 Mistakes Newbie Tire Techs Make

Nothing can turn a new tech into a veteran but time and experience, and often that experience is going to come from making mistakes – sometimes real bad ones – and learning from them (you hope). By addressing these most common mistakes right away with new tire techs, the worst of them can be avoided.

Rivet Bonding Comes Full Blast

Now that rivet bonding is in the mainstream with the Ford F-150, it’s time for shops to look into training and equipment for this repair process.

Other Posts

‘Test Before Touch’ – It’s No Waste of Time

To help reduce the headaches involved in servicing TPMS, it’s important to use the “Test Before Touch” procedures in your shop. Used properly, TBT can form a strong foundation for everything else you do regarding TPMS, reduce complexity and help you educate and keep your customers.

The Right Diagnostic Tools Save You From Extensive Disassembly Time

It can sometimes be difficult to make the correct diagnosis for a hard-to-start complaint. And diagnostic time may be extensive — and expensive. This article shows how certain tools have the ability to automatically analyze waveforms for you.

Know the Specs for Your Social Media Accounts

If you’re doing social media, are you doing it effectively? Are your accounts set up correctly? Are you posting often enough? Mark Claypool answers some questions.

Top 5 Tools: Kenny Younkins, Ken’s Auto Service Center

Kenny Younkins, owner Related Articles – Mayhew Introduces New 14-Piece Micro Hand Tool Set – New Small Stud Extractor Now Available from Mayhew Tools – Matco Debuts 5-Piece Purple Screwdriver Set Ken’s Auto Service Center Akron, OH While Ken first said his favorite tool is his fishing rod, he said in the shop he prefers