Milwaukee Tool continues to change user perceptions of cordless performance, run-time and durability by delivering its next generation M18 FUEL High Torque Impact Wrenches.
The new models include an M18 FUEL High Torque Impact Wrench with ½” Friction Ring and M18 FUEL High Torque Impact Wrench with ½” Pin Detent. Both are designed with a four-mode DRIVE CONTROL feature, providing the user with the versatility to switch between modes to match the power and speed to the application at hand. A new Bolt Removal Mode provides maximum nut-busting torque to remove the most stubborn bolts or nuts and, as soon as it senses the bolt or nut is broken free, the tool then shifts to 750 RPM for unmatched control when removing fasteners, says the company.
At up to 0.7” shorter than other cordless high torque impact wrenches, and over 0.5” smaller than their Milwaukee predecessors, the new tools provide greater access in tight spaces. Similar to other M18 FUEL Impact Wrenches, these solutions have a specialized rubber overmold material that provides ultimate comfort during prolonged use while lasting longer against corrosive materials.
As with all M18 FUEL products, the new tools feature three Milwaukee-exclusive innovations — the POWERSTATE Brushless Motor, REDLITHIUM XC5.0 Battery Pack and REDLINK PLUS Intelligence Hardware and Software — to deliver unmatched performance, durability and run-time.
The new M18 FUEL High Torque Impact Wrenches will be available September 2017.
Specifications
M18 FUEL High Torque Impact Wrench w/ ½” Pin Detent (2766-22)
- 750 ft.-lbs. Fastening Torque
- 1,100 ft.-lbs. Nut-Busting Torque
- RPM: 0-950 / 1,500 / 1,800 / 1800-750
- IPM: 0-1,150 / 2,100 / 2,400 / 2,400
- Length: 8.1”
- Weight (w/ XC5.0 battery): 7.1lbs
Includes M18 FUEL High Torque Impact Wrench w/ ½” Pin Detent, twoM18 HIGH CAPACITY REDLITHIUM XC5.0 battery packs, multi-voltage charger and case.
*Also available as a Bare Tool (2766-20)
M18 FUEL High Torque Impact Wrench w/ ½” Friction Ring (2767-22)
- 1,000 ft.-lbs. Fastening Torque
- 1,400 ft.-lbs. Nut-Busting Torque
- RPM: 0-550 / 1,400 / 1,750 / 1750-750
- IPM: 0-950 / 1,750 / 2,100 / 2,100
- Length: 8.4”
- Weight (w/ XC5.0 battery): 7.5lbs
Includes M18 FUEL High Torque Impact Wrench w/ ½” Friction Ring, two M18 HIGH CAPACITY REDLITHIUM XC5.0 battery packs, multi-voltage charger and case.
*Also available as a Bare Tool (2767-20)
For more information on the full line of Milwaukee products, call 1-800-SAWDUST or visit milwaukeetool.com.