Nissan Tech Tip: Engine will Not Crank with Outside Temperature Below 10 Degrees

Nissan Tech Tip: Engine will Not Crank with Outside Temperature Below 10 Degrees

This TSB applies to Altima, Maxima, Quest, Murano, 350Z, Titan, Armada, Pathfinder, Xterra and Frontier models.

Confirm a “no crank” (starter doesn’t work) incident under all of the following conditions:
1. The vehicle sat for several hours (cold soak) with outside temperatures below 10° F (12° C).
2. The vehicle was then driven for a short period of time (5-10 minutes).
3. The engine was then turned off for a short time (5-10 minutes).
4. The engine would then not crank when a restart was attempted (starter doesn’t work).

Note: This TSB applies only if all of the above conditions occurred.

Applied Vehicles:
• 2002-’06 Altima (L31);
• 2004-’06 Maxima (A34);
• 2004-’06 Quest (V42);
• 2003-’06 Murano (Z50);
• 2003-’06 350Z (Z33);
• 2004-’06 Titan (A60);
• 2004-’06 Armada (TA60);
• 2005-’06 Pathfinder (R51);
• 2005-’06 Xterra (N50); and
• 2005-’06 Frontier (D40).

Action:
Replace the Intelligent Power Distribution Module-IPDM (see chart). For IPDM replacement information, go to the Service Manual, section PG, Removal and Installation of IPDM E/R.

Technical service bulletin courtesy of Mitchell 1.

For more information on Mitchell 1 products and services, automotive professionals can log onto the company’s website at www.mitchell1.com.

You May Also Like

TS Toolbox Guide February 2024

Here’s a look at some of the core feature and modern frills to consider when it’s time to move into a new office.

toolbox guide illustartion

The corporate world has offices. You hang pictures on the wall, keep a few trinkets on your desk and a few snacks in one of your desk drawers. It’s your space. As technicians, we have our toolbox. It’s our “office” on wheels. But it’s different. We have no “work from home” option. We can’t take it with us and work at a coffee shop. Our “office space” becomes far more important. This is where we make our living.The size of a toolbox and the features we choose depend on multiple factors, which have changed over the years along with automotive and tool technology. Here’s a look at some of the core features and modern frills to consider when it’s time to move into a new office.

Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah
TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool
2024 Is Your Year to Be the Technician You Always Wanted to Be

As we enter 2024, strategic career planning is essential for success in the automotive repair industry.

happy new year 2024

Other Posts

Repairify Announces Executive Leadership Changes

The company has named Craig Edmonds as president of asTech among other executive appointments.

PRT Launches 22 New Products on Complete Strut Assemblies

The new items come to expand the PRT portfolio in North American Market and represents more than 12 Million vehicles in new coverage.

Autel to Bring OEM Repair Data to its Ultra Series Tablets

Autel partners with MOTOR Information Systems to provide an improved experience for users and more streamlined access to OEM repair information using MOTOR’s TruSpeed Repair.

Upgrade Your Air System: It’s Easier Than You Think

Improving your shop airflow is only a benefit, unless you like to spend more time, work harder and make less money.

air flow tubes