New Ford, Lincoln and Mercury Specialty Tools from OTC
Connect with us
Close Sidebar Panel Open Sidebar Panel
Ford, Lincoln and Mercury Specialty Tools

Tools

New Ford, Lincoln and Mercury Specialty Tools from OTC

These tools will allow technicians better servicing capabilities for the nation’s most popular vehicles, increasing efficiency for technicians and saving customers time during repairs.

Advertisement

Designed to make every vehicle service more efficient for technicians, OTC has released a series of five new specialty tools, expanding its portfolio of OEM-level specialty tools to better service Ford, Lincoln and Mercury vehicles.

Click Here to Read More
Advertisement

Now available throughout North America, the tools include:

6879 Locknut Pin Remover — The OTC Locknut Pin Remover allows technicians to quickly and easily remove a locknut roll pin by simply threading the tip into the roll pin and using the slide hammer to pull the pin out. The new tool is compatible with locknut roll pins on 2009 and later select Ford, Lincoln and Mercury vehicles. The tip can be replaced with OTC part #37907.

6883 Pinion Flange Holding Tool — The OTC Pinion Flange Holding Tool offers a universal design and 1/2-in. square drive opening in the handle for extra leverage that fit flange bolt centerlines up to 2-5/8-in.. The tool fits most Ford, Lincoln and Mercury drive pinion flanges. Each tool purchase includes 5/16-in. and 3/8-in. bolts, nuts and washers.

Advertisement

6884 Crankshaft Rear Seal Wear Ring Remover The OTC Crankshaft Rear Seal Wear Ring Remover removes the rear seal and wear ring from the crankshaft, offering damage control to a vehicle’s injector wiring harness. The new tool is compatible with 2003-2010 F-250, F350, F-450, F-550, and Excursion; 2004-2007 F-650 and F-750; 2004-2010 E150, E-250, E-350, E-450, and Low Cab Forward; and 4.5L, 6.0L, 6.4L and VT365-MaxxForce7 Navistar International.

6886 Crankshaft Front Seal and Wear Ring Remover The OTC Crankshaft Front Seal and Wear Ring Remover removes the front seal and wear ring from the crankshaft to allow for better prevention of engine damage. Applications include 2003-2007 F-250, F350, F-450, F-550 and Excursion; 2004-2007 F-650 and F-750; 2004-2010 E150, E-250, E-350 and E-450; and 2006-2009 Low Cab Forward. 4.5L, 6.0L and VT365-MaxxForce7 Navistar International.

Advertisement

6889 Crankshaft Front Seal and Wear Ring Installer Designed to eliminate lip flare on the wear sleeve and install the seal properly, the OTC Crankshaft Front Seal and Wear Ring Installer installs the front seal and wear ring on the crankshaft. The new tool is compatible with 2008-2010 F-250, F-350, F-450, F-550, 6.4L Ford Powerstroke engines, and VT365 MaxxForce7 Navistar International.

OTC’s new specialty tools are available now on OTC’s website and through OTC distribution partners and resellers.

For more info: otctools.com

Advertisement
Click to comment
Connect
Tech Shop Magazine