How Sensors Provide ‘Good Input’ for Diagnostics
One of the systems that Subaru has perfected through improved reliability over the years has been its distributorless ignition system (DIS) for all of its models. Because of the horizontally opposed design of its engines, the ignition system can be centrally mounted and made simple. In this article, we will touch on some common diagnostic
Diagnostic Dilemmas: Playing the Diagnostic Shell Game
More often than not, deciphering diagnostic trouble codes is like playing a high-tech version of the old circus sideshow “shell” game. In the trouble code shell game, we are led to believe that the pea (diagnostic solution) is hidden under one of the shells (DTCs) stored in the diagnostic memory. Unfortunately for the diagnostic technician,
The Fuel Injector Market and System Configurations
Looking back into automotive history, it’s hard to believe that carburetors were still being installed on import vehicles as late as 1989! But carburetors require all sorts of external vacuum and electronic gimmickry to control the cold-starting, fast idle, hot idle and low-speed cruise functions. Electronic fuel injection has since replaced carburetors in all import
Underhood Service: Troubleshooting Troublesome Injectors
Clean fuel injectors are a must for peak engine performance, fuel economy and emissions. If the injectors are dirty and can’t deliver their normal dose of fuel, then performance, fuel economy and emissions are all going to suffer. Dirty injectors can’t flow as much fuel as clean ones, nor can they deliver the correct spray
OBD II Diagnostics:Tips And Tricks to Make the Process Easier
The Malfunction Indicator Lamp (MIL) can be a golden light of opportunity for your shop. If the light comes on, it means the Onboard Diagnostics II system (OBD II) has detected an emissions-related problem. OBD II is designed to turn on the MIL if a problem occurs that may cause emissions to exceed federal limits
Selling Multi-Coil Ignition Parts
Time has indeed passed you by if you still believe in the traditional import engine tuneup. Many years ago, much of the import service market revolved around the annual spark plug, ignition cable, distributor cap and rotor replacement needed to maintain an import engine at peak efficiency. During the past decade, however, multi-coil waste-spark and
Head Gasket Replacement
During some point in their service lives, most import engines built with cast-iron cylinder blocks and aluminum cylinder heads will need a cylinder head gasket replacement. The vulnerability of aluminum-head engines to head gasket failure is caused by the aluminum cylinder head expanding approximately 1.5 times more than the cast-iron block. Although measured in thousandths
Secondary Ignition System Maintenance
As one might expect, the introduction of low-maintenance ignition systems has changed how we sell and service secondary ignition system parts for import vehicles. Most import nameplates have, for example, replaced conventional distributor ignition systems with distributorless or coil-on-plug (COP) ignitions in order to reduce the number of wearing parts in the secondary or high-voltage