You searched for Dipstick Removal - Page 3 of 3 - TechShop Magazine
2006 Ford Explorer Pointers

Photo 2). Another change for the 4.6L in 2006 is that it no longer uses a knock sensor. Both, the 4.0L and the 4.6L use a PCM-controlled heated PCV valve. The PCV valve on the 4.0L SOHC engine is located in the back of the left valve cover, mounted horizontally, and is well hidden from

Diagnosing & Servicing Automatic Transmissions

To prevent having any service from being over sold or under sold, it is important to not only know that a particular service should be performed, but also why it should be performed. That knowledge can also help you spot when to recommend that service, and when not to. When speaking about transmission fluid, the

Engine Maintenance: Head Gasket Failure Symptoms and Diagnosis

Over the last decade, the engines that have been used in the Honda and Acura line of cars and SUVs not only deliver many miles of service, but their performance level sets a standard that few car makers in their class have been able to match. Additional proof of both the reliability and potential of

Head Gasket Replacement

During some point in their service lives, most import engines built with cast-iron cylinder blocks and aluminum cylinder heads will need a cylinder head gasket replacement. The vulnerability of aluminum-head engines to head gasket failure is caused by the aluminum cylinder head expanding approximately 1.5 times more than the cast-iron block. Although measured in thousandths