Performing A Brake Job On A 2007-2013 Toyota Tundra

Performing A Brake Job On A 2007-2013 Toyota Tundra

For 2007, the Toyota Tundra was redesigned. The body changed, and the foundation brake system was also updated with larger front brake calipers and rear disc brakes. The control system and hydraulics changed with a new vehicle stability system that included yaw, steering angle and brake pedal load sensors.

For 2007, the Toyota Tundra was redesigned. The body changed, and the foundation brake system was also updated with larger front brake calipers and rear disc brakes. The control system and hydraulics changed with a new vehicle stability system that included yaw, steering angle and brake pedal load sensors. 
 
Overall, this is one of the easier brake jobs. Changing the front brake pads does not require the application of lubricants. The rear brakes are a lot easier to service when compared to the previous models. 
Front Brakes
The front brakes use the typical Toyota truck four-piston caliper. The pads are held in with pins that have an anti-rattle clip on the lower pin and a pin holder clip. These items should not be reused when replacing the pads. A quality pad set will include these in the box.

Toyota has designated the bolts that hold the caliper to the knuckle as non-reusable parts. Replacement bolts are readily available. Some remanufactured calipers include new bolts.
 
When removing the pads or pushing back the pistons, use the correct tool. A brake pad spreader can not only save time, but also prevent damage to the piston boots. 
 
The OE friction formulation on the Tundra is ceramic. A replacement brake pad should be of a similar formulation. 
 
The original pads on the Tundra come with shims. Do not lubricate the back of the pad with any lubricant. The lubricant will only transfer onto the piston boots and cause them to attract debris. This can lead to an early failure. 
 
Pulsation is an issue with some 2007-2009 Tundra models. Most of the issues are related to excessive runout or uneven deposits of friction material on the rotor. The runout specification on the Tundra is .05 mm or .002”. The hub flange should have almost zero runout. 

Rear Brakes
The 2007 Tundra is equipped with disc rear brakes with the parking brake in the hub. The caliper is a floating design with a single piston. The OE friction formulation is ceramic. The OE backing plate uses a clip-style shim. 
 
According to Toyota, the abutment clips and guide pin boots are non-reusable parts that should be replaced if the pads are serviced. The guide pins should be lubricated with a brake-specific lubricant that is not petroleum based. 
Parking Brake
To adjust the parking brake, insert an adjustment tool into the adjustment hole on the disc. 
1. Rotate the adjustment wheel in the "X" direction until the shoes are locked. 
2. Rotate the adjustment wheel in the "Y" direction 8 notches.
3. Check that the disc can be rotated smoothly. If not, rotate the adjustment wheel in the "Y" direction and check again.
4. Install the hole plug.

You May Also Like

Building a Shop Culture of Success

First, write out your plan for success. Next, be sure to train your entire team at the same time.

Courtesy of ShopOwner by David Rogers

Are you ever done training? 

Does it ever feel like you’re too busy and stretched too thin to focus on your operation? 

It’s harder than ever to find and hire critical team members, so it’s no surprise that during busy summer months, many shop owners feel like they only way to stay on top of higher car counts is to drop everything else so they can focus on working inside the business as an advisor or technician. 

Smash the Peppermint Pig

What’s the best tool an auto technician can own? Is it really possible to say?

Drywall Pro’s Invention Becomes a Hit with Auto Painters

We love how inventive people are! Here’s a great story of someone who developed a tool auto repair techs can use too!

Drywall Pro’s Invention Becomes a Hit with Auto Painters
On the Job: Eye Protection

Most employees want to work in a safe manner. So why do these preventable eye injuries keep occurring?

The Latest in Auto Repair Workwear

Here’s a look into the many options available in today’s workwear specifically designed for automotive technicians.

Other Posts
Snap-on Launches New Toyota Brake Pin Punch

New brake pin punch designed for quick and easy brake service on Toyota trucks and SUVs.

#2 Calipers & Micrometers

Calipers and Micrometers are essential measuring tools when exact precision is required.

Fuel Pumps and Cranking

Diagnosing the problem comes down to understanding what causes a loss of fuel pressure.

How To Sell Service, Not Price

How do you explain to customers why your recommendations are not based on being the low-price provider?