Premium Exhaust System for 2010 Camaro V6 Available from CORSA Performance

Premium Exhaust System for 2010 Camaro V6 Available from CORSA Performance

The CORSA Camaro exhaust system (part #14953) is a dual rear exit cat-back exhaust featuring 304 Stainless Steel 4-inch Pro-Series tips etched with the CORSA logo.

CORSA Performance Exhausts, a TMG Performance Products company, introduces its new premium performance exhaust system designed exclusively for the 2010 Camaro 3.6L V6.
      
The CORSA Camaro exhaust system (part #14953) is a dual rear exit cat-back exhaust featuring 304 Stainless Steel 4-inch Pro-Series tips etched with the CORSA logo. The company’s patented Reflective Sound Cancellation (RSC) technology ensures drivers can cruise without interior drone while keeping a bold, powerful sound outside the vehicle. The technology targets low-frequency sound waves within the muffler case, canceling only drone-causing sound frequencies, leaving the bold sound without flow restriction or electronic devices.
      
"The non-restrictive design of our exhaust system allows it to flow 44% better than what is offered by stock and is 11 pounds lighter," said Craig R. Kohrs, VP marketing and sales, TMG Performance Products.  "And more importantly, its lets the Camaro owner drive a car that sounds as good as it looks."
      
CORSA includes the XO Pipe with its 2010 system.  With easy bolt-on installation, consumers will not have to wait long to experience the improved sound on their Camaro. Hardware and detailed installation instructions are also included.
      
For more information, call (800) 486-0999 or visit www.corsaperformance.com.  

You May Also Like

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

The new BendPak SP-7XE Series of full-rise scissor lifts provides the performance and undercarriage access of traditional two-post lifts in a more compact, space-saving package. Floor- and flush-mount (SP-7XEF) models of this frame-engaging lift are available. 

With a rated capacity of 7,000 pounds, SP-7XE Series lifts are designed for full-service auto shops, quick-lube pits, and any other service area with little room to spare. They can raise most passenger vehicles and light trucks nearly six feet, so techs can easily access all critical undercarriage areas without having to stoop or crawl across the floor. They fold flat when not in use. 

CTA Tools Debuts Chrysler Cam Phaser Master Set – VVT & VVL

Applications included are for 2011-2022 Chrysler, Dodge & Jeep models.

Mayhew Introduces New 14-Piece Micro Hand Tool Set

This new set is a compilation of all the current micro line products from Mayhew; including pry bars, picks, hooks and screwdrivers.

Victor Reinz Reinzosil Sealant Added to Spicer CV Service Kits

Victor Reinz Reinzosil vulcanizing silicone boosts resistance to various fluids, making it sensor-safe for a wide range of applications.

Gray Tools Introduces Insulated Hex Bit Socket Set

The insulated tool sets are backed by a limited lifetime warranty.

Other Posts

Snap-on Debuts New General Service Set 

The company says technicians now have maximized tool concentration in the smallest footprint.

Chevron Introduces New Rykon Formula to Grease Product Line

The new calcium sulfonate complex-based grease is designed for heavy-duty and extreme pressure applications.

New Small Stud Extractor Now Available from Mayhew Tools

This new stud extractor, 1/4″ drive, allows for stud and bolt removal from tighter spaces with a wide option of driver abilities for job versatility.

6250 1⁄4” Mini Rt. Angle Die Grinder

The low weight ultra-compact design provides added control and maneuverability.