ProAct Ceramic Disc Brake Pads from Akebono Provide Quieter Braking

ProAct Ceramic Disc Brake Pads from Akebono Provide Quieter Braking

Engineered to eliminate noise, vibration and harshness, ProACT Ceramic Disc Brake Pads provide the ultimate braking experience. The best replacement for restoring OE ceramic pad performance, ProACT Ceramic Disc Pads are also ideal for upgrading from conventional pads.

Why choose ProACT? Here’s why…
• Increased safety and comfort;
• Ultra-quiet;
• Enhanced durability; and
• Low dusting.

Engineered to eliminate noise, vibration and harshness, ProACT Ceramic Disc Brake Pads provide the ultimate braking experience. The best replacement for restoring OE ceramic pad performance, ProACT Ceramic Disc Pads are also ideal for upgrading from conventional pads.

In addition to dramatically quieter braking, ProACT Ceramic Pads provide best-in-class braking performance, including enhanced initial effectiveness (no break-in required), high resistance to fade, consistent brake pedal feel and ultra-low dusting for cleaner wheels and tires. Ceramic technology also causes minimal wear on brake rotors.

All of this adds up to fewer comebacks, increased bay efficiency and completely satisfied customers.

Akebono ceramic brake technology leads the industry with these exclusive features:
• Harmonically damped design for maximum control of NVH;
• Vehicle-optimized ceramic formulas for superior performance that is unmatched by “one size fits all” brands;
• Post cured and heat scorched to ensure the highest initial effectiveness requiring no “break-in procedures” (exclusive to front formulations);
• “Rotor-friendly” pad formulations prevent uneven rotor wearing and pulsation complaints;
• Precision-fit steel backing plates reduce vibration-induced noise;
• 100% chamfered and slotted to further enhance NVH control;
• High resistance to fade with fast recovery;
• Precision-fit shims aid in noise abatement and prevent shim migration;
• Black powder coat finish provides OE-level corrosion resistance;
• 100% asbestos-free formulations; and
• High-temperature resistant moly lube included in all boxes.

For additional information, visit www.akebonobrakes.com.

You May Also Like

Pulling Codes: Multiple Misfire Personalities

A vehicle fails an emission test due to a series of codes, with misfire activity found on cylinders 2, 4, 6, 8 and 3 – and a strange metallic sound can be heard when the rpms are raised. See how Carlton Banks solves this latest Pulling Codes case.

A Story of Codes P0302, 04, 06, 08 & 03
 

This month’s diagnostic journey begins with a 2008 Land Rover Discovery that is taken in to a local testing facility for an emission test and fails due to a series of misfire codes.

Misfire activity is found on cylinders 2, 4, 6, 8 and 3; at first glance this series of codes implies that there may be bank 2 issues, but the cylinder 3 code throws a wrench into that mode of thought.

Using Volumetric Efficiency to Determine the Health of an Engine

Using an OBD II scan tool/dynamometer simulation/calculation program that can graph volumetric efficiency (VE) over rpms, contributor Glen Beanard devised a test sequence using real-world vehicles. This article takes you step by step through his diagnostic process.

Intermittent Engine Misfire Analysis

Even for an experienced diagnostic technician, attempting to diagnose an intermittent misfire condition that occurs only under specific driving conditions can be a frustrating exercise. Contributor Gary Goms breaks it down, and includes tips for using a scan tool and a lab scope.

5 Mistakes Newbie Tire Techs Make

Nothing can turn a new tech into a veteran but time and experience, and often that experience is going to come from making mistakes – sometimes real bad ones – and learning from them (you hope). By addressing these most common mistakes right away with new tire techs, the worst of them can be avoided.

Rivet Bonding Comes Full Blast

Now that rivet bonding is in the mainstream with the Ford F-150, it’s time for shops to look into training and equipment for this repair process.

Other Posts

‘Test Before Touch’ – It’s No Waste of Time

To help reduce the headaches involved in servicing TPMS, it’s important to use the “Test Before Touch” procedures in your shop. Used properly, TBT can form a strong foundation for everything else you do regarding TPMS, reduce complexity and help you educate and keep your customers.

The Right Diagnostic Tools Save You From Extensive Disassembly Time

It can sometimes be difficult to make the correct diagnosis for a hard-to-start complaint. And diagnostic time may be extensive — and expensive. This article shows how certain tools have the ability to automatically analyze waveforms for you.

Know the Specs for Your Social Media Accounts

If you’re doing social media, are you doing it effectively? Are your accounts set up correctly? Are you posting often enough? Mark Claypool answers some questions.

Top 5 Tools: Kenny Younkins, Ken’s Auto Service Center

Kenny Younkins, owner Related Articles – Lisle 61860 Oil Filter Housing Torque Adapter – Mueller Kueps Presents Redesigned Sensor Tap Series – Lisle Low Profile Fuel Line Disconnect Ken’s Auto Service Center Akron, OH While Ken first said his favorite tool is his fishing rod, he said in the shop he prefers these five: