Road to AAPEX Ep. 6: The End of the Road

Road to AAPEX Ep. 6: The End of the Road

Did Joe and the Cadillac make it to Las Vegas for AAPEX?

It all comes down to this. 

“I didn’t want something easy. I wanted something that was going to be an ‘Are you going to make it?’ moment every time I get in the car.”

That’s how Babcox Media’s Joe Keene set the stage in the first episode of Road to AAPEX, well before he knew what was ahead of him. And oh boy did he deliver on those “Will he make it?” moments! 

The road to fixing up a 33-year-old Cadillac Brougham with more than 180,000 miles on the odometer to make the 2,500-mile drive from Akron, Ohio, to Las Vegas for AAPEX was long and unpredictable. It was also fun and exciting as Keene, an ASE-certified technician, was able to take in the sights of America’s automotive past on Route 66. 

As the journey rolled on, one thing became clear: If the Caddy was going to make it, if it was even possible, the automotive aftermarket would make it happen. The automotive supplier partnerships, the independent shops — the people that are the heartbeat of the aftermarket industry — were behind him every step of the way.

Now there’s just one question left to answer: Did Joe and the Caddy make it to Las Vegas for AAPEX? 

For the answer, watch the episode above.

You May Also Like

Introduction to the Maverick Tire Changer

Joe Keene speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer.

Joe Keene, automotive content video producer at Babcox Media, speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer and runs thorough a demonstration of a typical low-profile sidewall procedure. This video is sponsored by Hunter Engineering Co.

Hyundai Front Windshield Camera Sensor and Blindspot Calibration

Joe Keene discusses the calibration procedure for a Hyundai Santa Cruz that needed a windshield replacement and rear bumper repair.

Autel’s ADAS Bay Max Vehicle Lift

Learn how this lift integrates mechanical repair, four-wheel alignment, and ADAS calibration, prioritizing efficiency and space utilization in your shop.

Tool Time Podcast: SATA USA

In this episode of Tool Time, Nadine and Eric sit down with Chris Springer of SATA USA.

How-to Complete Emissions Monitors Faster

This video will focus on how a product like CAT COMPLETE can improve the chances of completing the monitors faster. This video is sponsored by Rislone.

Other Posts

Tool Time Podcast: Clore Automotive

Jim O’Hara from Clore Automotive joins Nadine Battah and Eric Garbe.

ADAS Calibrations: Limited Space

Babcox Media’s Joe Keene provides a quick overview of many examples that demonstrate ADAS work should be in play for almost everyone.

Software Focus: Efficient Diagnostics

Discover how to quickly retrieve codes, access exclusive repair information, and develop a strategic plan for optimal diagnostic results. This video is sponsored by Bosch.

Taking Advantage of Vital Software Tools: Special Tests

The Special Test menu has functions that can help you diagnose a problem, finish a repair, and confirm the fix. This video is sponsored by Bosch.