Save Money with Mr. Gasket's New Max Fueler

Save Money with Mr. Gasket’s New Max Fueler

With today's ever-increasing gas prices, saving money on fuel is more important than ever. Mr. Gasket introduces a new Vortex generator that maximizes your fuel mileage - the Max Fueler (Part #1776).

With today’s ever-increasing gas prices, saving money on fuel is more important than ever. Mr. Gasket ( introduces a new Vortex generator that maximizes your fuel mileage – the Max Fueler (Part #1776). The Max Fueler is a breakthrough in performance-enhancing technology, with a simple design that allows for easy installation and lasts the life of the vehicle.

By generating a vortex of air in your vehicle’s intake, the Max Fueler allows the engine to breathe more efficiently, increasing gas mileage and providing an average fuel savings of 1-3 MPG depending on make and model. This equates to $50 to over $100 savings a year on gas.

The Max Fueler is universal in design to work in nearly every fuel injected gasoline vehicle, and will fit all 2" (50 mm) to 4" (105 mm) intake openings. It features trimmable blade tips and high impact nylon, requires no special tools to install, and has no moving parts. The Max Fueler will not void the vehicle warranty.

Mr. Gasket is a division of Prestolite Performance. For more information on Mr. Gasket products, visit our website at

You May Also Like

Pulling Codes: Multiple Misfire Personalities

A vehicle fails an emission test due to a series of codes, with misfire activity found on cylinders 2, 4, 6, 8 and 3 – and a strange metallic sound can be heard when the rpms are raised. See how Carlton Banks solves this latest Pulling Codes case.

A Story of Codes P0302, 04, 06, 08 & 03

This month’s diagnostic journey begins with a 2008 Land Rover Discovery that is taken in to a local testing facility for an emission test and fails due to a series of misfire codes.

Misfire activity is found on cylinders 2, 4, 6, 8 and 3; at first glance this series of codes implies that there may be bank 2 issues, but the cylinder 3 code throws a wrench into that mode of thought.

Using Volumetric Efficiency to Determine the Health of an Engine

Using an OBD II scan tool/dynamometer simulation/calculation program that can graph volumetric efficiency (VE) over rpms, contributor Glen Beanard devised a test sequence using real-world vehicles. This article takes you step by step through his diagnostic process.

Intermittent Engine Misfire Analysis

Even for an experienced diagnostic technician, attempting to diagnose an intermittent misfire condition that occurs only under specific driving conditions can be a frustrating exercise. Contributor Gary Goms breaks it down, and includes tips for using a scan tool and a lab scope.

5 Mistakes Newbie Tire Techs Make

Nothing can turn a new tech into a veteran but time and experience, and often that experience is going to come from making mistakes – sometimes real bad ones – and learning from them (you hope). By addressing these most common mistakes right away with new tire techs, the worst of them can be avoided.

Rivet Bonding Comes Full Blast

Now that rivet bonding is in the mainstream with the Ford F-150, it’s time for shops to look into training and equipment for this repair process.

Other Posts

‘Test Before Touch’ – It’s No Waste of Time

To help reduce the headaches involved in servicing TPMS, it’s important to use the “Test Before Touch” procedures in your shop. Used properly, TBT can form a strong foundation for everything else you do regarding TPMS, reduce complexity and help you educate and keep your customers.

The Right Diagnostic Tools Save You From Extensive Disassembly Time

It can sometimes be difficult to make the correct diagnosis for a hard-to-start complaint. And diagnostic time may be extensive — and expensive. This article shows how certain tools have the ability to automatically analyze waveforms for you.

Know the Specs for Your Social Media Accounts

If you’re doing social media, are you doing it effectively? Are your accounts set up correctly? Are you posting often enough? Mark Claypool answers some questions.

Top 5 Tools: Kenny Younkins, Ken’s Auto Service Center

Kenny Younkins, owner Related Articles – MARTINS Launches Its Own Line of Impact Wrenches – NEBO Offers Inspection Lights for Work, Home and Hobby – TEXA USA Releases TXT MULTIHUB VCI Ken’s Auto Service Center Akron, OH While Ken first said his favorite tool is his fishing rod, he said in the shop he prefers